Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.4 LAccepted-AOC NO 45 5TH CROSS MALLAPPA LAYOUT BABUSAPALYA KALYAN NAGAR BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹30.6 L+₹2.2 L (7.73%)Rejected-AOC NO 6 G 2 SS ENCLAVE 1ST MAIN 1ST CROSS INDIAN EXPRESS LAYOUT VIRUPAKSHAPURA VIDYARANYAPURA POST BANGALORE 560 097 | BENGALURU URBAN | KARNATAKA | 560097 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹33.9 L+₹5.5 L (19.4%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹35.0 L+₹6.6 L (23.4%)Rejected-AOC NO 64 5TH C MAIN 7TH CROSS AGROGYAPPA LAYOUT KAMMANAHALLI NEAR RAJ KUMAR PARK BANGALORE 560084 | BENGALURU URBAN | KARNATAKA | 560084 | L4 | Rejected-AOC Higher bid value | |
| 5 | Rejected-Technical 14 10 4TH MAIN 8TH C CROSS SRINIVASA NAGAR BSK 3RD STAGE BENGALURU 560085 | BENGALURU URBAN | KARNATAKA | 560085 | - | Rejected-Technical Not recommended wrt his letter No Nil dated 07 Jun 2023 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE 560006
REPAIR MAINT TO IRON GATES WICKET GATES AND OTHER MISC WORK AT CHAF BANGALORE
2023_MES_589736_1
8988/GE/13
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BANGALROE
AS PER NIT
5 documents required · 5 mandatory
₹500
GE (AF) BANGALORE
₹60,000
18 Jul 2023
17 Apr 2023
12 Jun 2023
17 Apr 2023
5 Jun 2023
20 May 2023
19 Apr 2023 - 26 Apr 2023
Amount
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed
S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and as directed
S&F Mild steel, plain, black sheet 1.25 mm in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required all as specified and directed.
S&F Steel rolling shutters, 1.0 mm thickness of lath without ball bearing, as specified including top cover, anchoring rod, hasp and staple including one shop coat of primer; fixed as in repairs complete all as specified
Taking down rolling shutter , hood cover and guide channels etc complete width of rolling shutter upto 3.00 metre , incl complete servicing , greasing , oiling and strengthening of guide channels and refixing all arrangements in proper alignments for smooth functioning , complete all as specified and directed
S & F in repairs Mild steel plain sheet 0.63mm thick , cut to size , made to shape of hood cover of rolling shutters , fixed in position including painting two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed .
Taking down existing unserviceable tension spring of rolling shutter and provision of new tension spring of approved quality , fixed as in repairs , complete all as specified and directed
Taking down existing unserviceable locking arrangement of rolling shutter and provision of new locking arrangement with mild steel safety lever locks 4 levers , complete all as specified and directed
S&F in repairs,Ball bearing for rolling shutter, complete all as specified and directed
S & F Collapsible steel gates , top hung , consisting of channels pickets , pivoted flat bars , top and bottom runners , brass handles etc erected in postion and securing runners with holdfasts and brackets including taking down collapsible steel gate of any description , complete all as specified and directed . Note : The rate quoted shall incl for provision of suitable size of bed blocks in PCC 1 : 2 : 4 type B1 for securing of runners hold fasts etc.
Repairs to existing Collapsible steel gates of any type and any description incl oiling and greasing complete for smooth functioing all as specified and directed . Note : The rate quoted shall incl for replacing of old fittings / fixtures such as wheels , handles and locking system with new fittings / fixtures .
Demolition of brick work / stone boulder masonry , built in cement mortar incl all quoins , arches pillars etc but excluding ashlar facings etc.complete all as specified and directed Note : All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal , state , and local regulations . (Debris except item considered under schedule of credit)
M & L Pre - cast cement concrete block masonry with solid blocks , in PCC 1:3:6 Type C1 ( 20mm graded aggregate ) exc . 10 cm in width and setting in mortar 1:6 complete all as specified and as directed
Dismantling CGI / asbestos cement/polycarbonate ( corrugated , semi - corrugated , etc ) sheet in roof coverings etc complete.
S & F Pre- painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screws all as specified and directed by Engineer in charge
S & F Pre - painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screws all as specified and directed by Engineer in charge
S & F in repairs polycarbonate sheet twin wall special quality of M / s Polygon / Tuflite / Flexi tuff 6 mm thick and including ' H ' connectors for joints and anti dust tape of approved colour ( transparent ) fabricated to required shape and curves including fixing to mild steel frame work with screws and washers etc complete all as specified and directed
Demolition of cement concrete ( un reinforced ) in ground floors and pavings n.exc 15cm thickness (below or above ground level) all as specified and as directed. Note : All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal , state , and local regulations .
M&L for 75mm thick PCC 1 : 4.8 type D - 2 (40mm graded aggregate) as in sub base all as specified and as directed.
Dismantling / breaking out existing cement block pavers of any description and thickness all as specified and directed
M & L for 75mm thick( compacted thickness)WBMwith coarse aggregates of grading2 (63 to 40 mm size) or of grading3 (50 to 20 mm size) with granite trap or basalt stone) spread rolled and consolidated as required including rolling with hand rollers
M & L for machine pressed precast concrete interlocking coloured rubber moulded paver block with grey cement and pigment , any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade laid over and including 50mm thick sand cushion all as specified and as directed by Engr in Charge
Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc. laid , bedded and pointed in cement mortar all as specified and as directed
M & L for 300mmx300mm of size and 20-22mm thick rubber moulded coloured chequered cement concrete tiles jointed with grey cement and pigment laid in floor over and including 20mm thick screed bed in cement mortar 1:6 all as specified and directed by Engr in Charge.
Taking down cement plaster on brick or stone wall , concrete surface etc. including racking out joints , hacking for key scrubbing down with water etc. complete all as directed Note : All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal , state , and local regulations
M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement including necessary scaffolding complete all as specified and as directed
M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces , finished fair and even etc including necessary scaffolding complete all as specified and as directed
M & L rendering 5 mm thick in cement mortar 1:3 on ceiling on brick or concrete surfaces , finished even and smooth without using extra cement including necessary scaffolding complete all as specified and as directed .
M & L for Preparing new plastered suface of walls and applying two coats of distemper oil emulsion , white or tinted over a coat of primer including necessary scaffolding up to 6th storey complete all as specified and as directed
M & L for preparing new plastered surface of walls and applying two coats of cement base paint over a coat of primer including necessary scaffolding up to 6th storey complete all as specified and as directed.
M & L for preparing new plastered surface of ceiling and applying three coats of white wash including necessary scaffolding complete all as specified and as directed
M&L for Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer , complete all as specified and directed
M & L for preparation of plastered or un plastered old decorated surfaces of walls by 5 brooming down or with steel wire brushing , scraping down smoke soot's , moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of cement base paint , including necessary scaffolding upto 6th storey complete all as specified and as directed
Design, S & F in repairs at site of the TRAY PANEL SCREW type system with aluminium composite panel of approved colour on exterior walls, coloums, MS structure, ceiling, coping, slab, projectons at all heights and elevation including neccesary aluminium framework. The aluminium composite panel should be 4mm thick consists of 3mm thick thermoplastic core of anti toxidant LDPE sandwitched between 2 skins of 0.5mm thcik aluminium alloy sheet making a total panel thickness of 4mm. The external surface shall be finished with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint. Note:- The system shall be designed to withstand a wind pressure of 190 kg/Sqm with necessary Alu. sub frames, cleats and shall be fixed to the masonry/ RC walls/ MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. Any other acessories such as fastening straps, nuts, bolts, rivets, washers, etc. other than anchor system shall be in Indian standard grade. all joints of ACP must be sealed with approved sealent of approved colour. şealant make DOW CORNING 789 weather sealant. Rate shall include to provide open cell polyethylene backer rods, weather sealant etc, all materials and labour complete.
S&F in repairs 300mm size (height) stainless steel letters, in Hindi / English/Kannad and fix with stainless steel screws etc complete all as specified and directed.
VIKAS CONSTRUCTIONS
MSA Constructions
K V RAJANNA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .