SPECIAL REPAIR INCLUDING ADDITION/ALTERATION TO ARCHIVE ROOM (PCDA BLDG) SEC 9, SPECIAL REPAIR TO BLDG NO P-24 OF 258 TRANSIT CAMP AND PROVN OF SEPTIC TANK (25 USERS) ADJACENT TO BUILDING NO T-08 (JCOS MESS) OF 229 TRANSIT CAMP AT HALLOMAJRA

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for including removing of debris out side MoD land complete all as specified and directed

Dismantling floors, hearth,wall tiling or terrazzo flooring including cement mortar bedding (but not backing), including removing and rubbish off the premises complete all as specified and directed.

M&L for Non skid ,joint free Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exc 0.11sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and in any pattern and shade/colour as directed by Engr-In-charge. Make-Somany or equivalent of Kajaria/Johnson

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . The tiles shall be laid in pattern with two or more colured tile including 10mm thick back coat in CM (1:3) on brickwork or concrete surfaces finished all in any pattern and shade/colour incl dismantling and re-fixing of electrical boards/points complete all as specified and directed by Engr-In-charge. Make-Somany or equivalent of Kajaria/Johnson

M&L for 25mm thick PCC 1:2:4 type B-0( 12.5 mm graded crushed stone aggregate) as in sub base of floor

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for seprately.

Applying evenly a tack coat of industrial bitumen 85/25 in two coats , one coat on plastered surface and 2nd coat on polyetthlene film @ 1.20 Kg/Sqm each.including cleaning surfaces

Supply and paste polyethene film 200 micron thick over sunken floor and wall complete all as specified and directed by EIC

Supply only Integral water proofing compound of approved make

M&L for Plain Cement concrete 1:7:12 type F2 (usng brick aggregate) as in sunken portion

S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests including 100 mm dia cast iron/PVC 'P' trap, embedded and set complete all as specified and directed.

S&F Vitreous China wash basin, ivory colour (oval shape), size 560x470 mm including necessary CP couplings, pvc waste pipes etc. to be mounted on granite base complete all as specified and directed.

S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe,

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including PVC flushing pipe, 32 mm dia and fixed complete all as specified.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm.

S&F in repair 15 mm bore stop valves/angle valve, fancy type ,chromium plated cast copper alloy, screwed down, high pressure , screwed both ends for iron pipe or for unions.

S&F in repair 15 mm bore bib taps chromium plated fancy type, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

M&L for granite(of any type) work (table rubbed and polished) cooking platform and like set in cement mortar (1:4) incl cutting,rounding the edges for fixing of wash basin etc.,pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite thickness of granite 18 to 20mm over 15 mm thick screed bed in CM 1:6

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern), including 32 mm low density polyethylene(HDPE) pipes of pressure rating 6 kgf/Sqcm waste pipe, 32 mm waste coupling of PTMT (half or full threaded Minimum weight 45gms ) suitable for urinals and Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms)

S&F in repair 15 mm bore fancy type chromium plated with long shank and cup (consealed type)Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed

S & F in repair Chromium plated shower roses with or without swivel joints, of 125mm size, including shower arm and fixing to steel pipe or union complete all as specified

S&F Aluminium peg stay set of 6 hooks

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site

All as per item above but 20 mm bore pipe.

Refixing old 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed to walls/ceiling or laid in floors making concealed all as specified and directed.

All as per item above but 20 mm dia

Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed to walls/ceiling or laid in floors making concealed all as specified and directed.

All as per item above but 20 mm dia

Dismantling of cast iron/ reinforced concrete/PVC drain pipes, 100/75/50mm, jointed in cement mortar and taking out of trenches/wall, complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with/without door access any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with/without door access any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including stainless steel gratings, 100 mm dia of outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4). jointing with solvent cement, all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site.

Taking down chowkats or frames exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description exc 1Sqm and not exc. 2 Sqm each, complete all as specified and directed.

Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

35mm thick 2nd class hard wood (Kail) Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, cut and mitred beads for securing glass etc size of members of shutters as spd in SSR part I, section 8.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh complete all as specified and directed. Note : MS guard bars, sheets glass,wire mesh and painting shall be measured and paid separately

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh complete all as specified and directed. Note : MS guard bars, sheets glass, wire mesh and painting shall be measured and paid separately

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workon- forming to Fe.290.Gde-E-165

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S& F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm with single side prelam PVC sheet plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Factory made PVC door shutter 30 mm thick ( style) 10 mm thick panel consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet beading and joined together with solvent cement , suplpling & fixing in frame at site as per specifaction and drawing

S&F Butt hinges,medium weight, cold rolled mild steel, and fixed for size100 mm

S&F extruded aluminium alloy handles, fabricated type, anodized of size 100 mm.

S&F 150mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality not exc 0.50Sqm in each pane fixed with oil putty complete all as specified in repairs.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane

S&F in repairs 20mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges.

S&F PTMT shelf 450x125 mm any colour with brass chromium plated screws & PVC rawl plug (min weight 300gm) fixed to walls

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)/50mm-1240gms)

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed

M&L Rendering 10mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement , complete, all as specified

M&L Rendering 15mm thick in cement mortar 1:6 on brick work or concrete surface, finished the surface even and smooth without using extra cement , complete, all as specified

M&L Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface, finished the surface even and smooth without using extra cement , complete, all as specified

M&L for rendering 15 mm thick in CM 1:4 on brick masonry surfaces finished even and smooth without using extra cement.using WPC etc all as specified and directed Note :- WPC shall be measured and paid separately

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M&L Complete removal of existing treatment of ceiling and applying three coats of white wash wash including cleaning the floor / joinery, surfaces, glass panes complete all as specified.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over average 2mm thick wall care putty over a coat of chalk whitening primer including cleaning the floor / joinery, surfaces, glass panes complete all as specified. Make/Brand : Asian Paints/Berger/Nerolac

M&L Complete removal of existing treatment of wall and applying two coats of oil bound distermper, white or colour over a coat of chalk whitening primer , including cleaning the floor / joinery, surfaces, glass panes complete all as specified. Make/Brand : Asian Paints/Berger/Nerolac

M&L for preparation of newly plastered surface of walls and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer all as specified. ake/Brand : Asian paint (Apex Ultima), Berger paint ( weather coat all guard) Dulux ( weather shield max), Nerolac (Excel Total).

M&L Complete removal of existing treatment of wall and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer , including cleaning the floor / joinery, glass panes etc complete all as specified. Make/Brand : Asian paint (Apex Ultima), Berger paint ( weather coat all guard) Dulux ( weather shield max), Nerolac (Excel Total).

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of old painted surfaces of steel over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L Preparation old wooden surface and applying one coat of synthetic enamel paint , any description over 10 cm in width or girth not otherwise described complete all as specified and directed.

Repairing the edges of concrete chajjas, facias, slabs, columns and the like by providing PCC (1:2:4) type B0 incl all necessary form work and or provn of rendering 15mm th(average thickness) in cement mortar 1:3 , after applying a coat of cement slurry @ 3 kg/sqm of surface, finished even and fair, surface area not exc 300 mm wide in patches incl taking down swoolen/damaged plaster of concrete complete all as specified

Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar.

M&L for mirror polished machine cut kota stone slab 18 to 20 mm thick in flooring over and including 15 mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for mirror polished machine cut kota stone slab 18 to 20 mm thick in riser of steps, shelves etc. round edges over and including 15 mm thick screed bed or bedding layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Dismantling of brick tiles or terracing tiles single layers as on roof including any treatment complete all as specified and as directed.

Demolition of Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition)

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L for an average 50mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding including water proofing compound and finished the surface even and smooth without using extra cement. Note : Water proofing compound to be paid seperately.

M&L for providing Screed bed or bedding layer of mortar 15 mm thick (using water proofing compound) for laying floor finishes in CM 1:4 screed bed under floor finishes complete all as directed. Note : Water proofing compound to be paid seperately.

M&L Providing & laying 3mm thick APP (Atactic poiypropylene polymer) modified prefabricated five layer, weight not less than 3.60 Kg/sqm water proofing membrane, black finished, reinforced with non-woven polyster matt make as approved, consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by the same membrane manufacture, of density 0.87 to 0.89 Kg/ltr at 25 degree C temperature and viscosity 70-160 cps. Over the primer coat, the layer membrane shall be laid using butane torch and sealing all joints etc after preparing the surface complete as per standard practise as per manufacturer`s instructions. The vital physical and chemical parameters of the membrane shall be as under :- (i). Joints strength in longitudinal and transverse direction at 23 degree C as 650 /450N/5 Cms. (2) Tear strength in longitudinal and transverse direction as 300/250/5 Cms. Softening point of membrane not less than 150 Degree C. Cold flexibility upto 20 degree C when tested in accordance with ASTM (D-5147). (3) The Laying of membrane shall be got done through the authorized applicator of manufacturer of membrane only.

Laying old brick tiles laid bedded in 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement including cleaing of old brick tiles for re-use.

M&L 40mm thick brick tiles bedded in 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as directed.

M&L Double charged Vitrified ceramic tiles 8 to 9mm mm thick ( square/rectangular) polished, area of each tiles n.exc. 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.Make: Somany/Kajaria/Johnson/Orient.

All as per item No 95 above but in vertical surface (dado/skirting) to match the sahde of floor tiles laid over and including 10mm thick back coat in CM (1:3),complete all as specified and directed.Make: Somany/Kajaria/Johnson/Orient.

S&F aluminium Anodised powder coated (min thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S&F aluminium Anodised powder coated (min thickness of powder coating 50 micron) door shutters,aluminium section with style and top rail of section 80x44 mm,16 guage thick and bottom rails of section 112x44 mm of 16 guage thick , middle rail 150x44 mm of 16 guage thick including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 01 No Tower Bolt, hinges/pivot,anodised aluminum snap beading screws etc complete all as specified.

S&F aluminium Anodised powder coated (min thickness of powder coating 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section including necessary joining cleats, glazing clips, rubber packing, hinges,handles 2 Nos, 02 Nos Tower Bolt, anodised aluminium snap beading, screws etc. complete all as specified

S&F aluminium Anodised powder coated (min thickness of powder coating 50 micron) (Deco) pattern grill 75x75mm size design No 102, 7.30mm thick including suitable F/H section frame fixed with aluminium plate screw to window complete all as specified and direcetd.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified

S&F Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever

S & F of aluminium snap grid false ceiling of panels of size 605 x 605mm using aluminium anodised wall angle of size 25 x 25 x 1.50mm thick fixed to walls with rawl plug and screws n. exc 1.50m c/c and intermediate panels using main "Tee" and cross "Tee" aluminium anodised section of size 35 x 25 x 1.50mm and 25 x 25 x 1.50mm thick suspended with and including 4mm dia GI wire n. exc 1.2m c / c and12mm thick Gypsum Board in ceiling with 1mm plain PVC Sheet fixed to aluminium frame work with screws complete all as directed.

S&F 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber / aluminium frame work

S&F 4mm thick Sheet glass,ordinary quality and glazing ordinary quality,if sheet glass is ground or obscured or frosted, on one side with oil putty in square exc 0.5sq. m in each pane complete all as specified and as directed.

S&F 5.5mm thick Sheet glass,ordinary quality and glazing ordinary quality,if sheet glass is ground or obscured or frosted, on one side with oil putty in square exc 0.5sq. m in each pane complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of Interior grade acrylic emulsion Paint over a coat of wall care putty (avg 2mm thick) and chalk whitening primer complete all as specified. Make/Brand : Asian Paints/Berger/Nerolac

S&L Steel curtain rod (Fancy Type) of 20 mm dia including curtain rings complete all as specified

S&F Steel bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed

M&L Septic tanks (for 25 users. ) , exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., NOTE :-Dimensions as per CECZ DGR No : STD 1320 (C) sheet 1/3 to 3/3.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified.

M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 200 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested.

M&L for providing reinforced concrete pipes , claps NP2 laid and jointed complete with collars 200 mm dia (internal) laid in trenches & jointed etc all as specified

Providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in surface channels and drains all as specified

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in CM 1:4 complete all as specified

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in any type of soil, complete, all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed

Taking down carefully aluminum/copper point wiring (light, fan, socket or power) complete along with fittings such as switches, ceiling roses, pendants, regulators sockets etc, and removing from site and making good disturbed surfaces of walls, floors etc all as directed by Engineer in Charge.

Taking down existing unserviceable sub main wiring with upto 2X6Sqmm aluminum/Copper cable all as directed by Engineer in Charge.

M&L for Module Point wiring complete with 1.5 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor, drawn through and including rigid non-metallic PVC conduit and conduit accessories fixed on surface of wall/ceilings or concealed etc., including provision of PVC insulated 1.5 Sqmm FRLS cable copper conductor for earth continuity and connected to common earth dolly connected including necessary MS terminal box with 3mm thicknes plastic laminated sheet cover of required size for the One light point controlled by one, 1 way module switc 5 Amps switch housing the switches, socket outlet etc. all as specified and as directed by Engineer in Charge.

All as per item No 124 but One ceiling fan/Exhaust/Wall fan point controlled by one, one way module 5 Amps switch

All as per item No 124 but One 3 pin socket outlet module 5 Amps on independent board

All as per item No 124 but One 3 pin socket outlet module 5 Amps on same board

M&L for Point wiring complete with 4 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor, drawn through and including rigid non metallic PVC conduit and conduit accessories fixed on surface of wall/ceilings or concealed etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor for earth continuity and connected to common earth dolly and modular type metal boxes concealed in wall , modular cover plates with frames on top for housing the switches, socket outlet etc., all as specified and as directed for one switch socket outlet 16 Amps on independent board. MAKE : Polycab / Finolex / havells/palaza

M&L for Sub main wiring/power wiring complete with two runs of 6.0 Sqmm, single core, PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/concealed etc., with one run of PVC insulated, 6.0 Sqmm FRLS copper conductor for earth continuity all as specified and as directed. MAKE : Polycab / Finolex / havells NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

All as per item No 3 here in above but with 2x6 Sqmm for phase and neutral and 1x6 Sqmm for earth wire complete. MAKE : Polycab / Finolex / havells/Palaza.

Supply & Fixing 6 Amps 1 way one module switch complete. Makes :- Anchor/Cona/Leader/SSK

Supply and Fixing 6 Amps three pin socket module complete. Makes :-Cona/Leader/SSK

Supply and Fixing 16 Amps one way one module switch complete. Makes :- Anchor/Cona/Leader/SSK

Supply and Fixing modular multi socket outlet 16 Amps three pin socket complete. Makes :- Anchor/Cona/Leader/SSK

Supply and Fixing step type electronic module fan regulator of capacity 100 watts 230 volts for ceiling flush type. Makes :- Anchor/Cona/Leader/SSK

Supply and Fixing Ceiling rose 3 terminal 5 Amps 230 volts PVC/Polycarbonate, insulated body. Makes :- Anchor/Cona/Leader/Bajaj

S&f in repair AC ceiling fan 1200 mm (BLDC) sweep with Accessires Complate with set of lades, down rod and set of canopy. Make :Usha/Crompton/Havells.

S&f in repair Exhaust fan 250 mm sweep high air delivery low noise complete with diffusers Make : USHA/Crompton/Havells.

Supply and fix in repair wall mounting AC fan 400 mm sweep with remote control conforming to BEE star rating completeall as specified and as directed by Engineer-in-charge. Make : USHA/Crompton/Havells/Bajaj

S&F Single pole and neutral enclosure with a two pin earth plug and socket complete controlled by one single pole MCB 20 Amps 240 Volts, complete all as specified and as directed.

Disconnection and removing the u/s light fitting from the false ceiling carefully and S&F LED (2X2) indirect light fitting Square shape 36 Watts 230 volts with internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size completed in all respect as specified and directed. MAKE :- Philips/Wipro/C&S/Crompton

M/s Krishan Aggarwal

M/s Super Trading Corporation