SPECIAL REPAIR TO BLDG NO T-84 OR MARRIED ACCN AT DAMANA UNDER GE JAMMU

Amount

B&R PORTION:- Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each, complete all as specified & directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified.

Taking down shutter of any description, exceeding. 1 Sqm and not exceeding 2 sqm each, complete all as specified & directed.

Refixing shutters of any description, exceeding. 1 Sqm and not exceeding 2 sqm each, complete all as specified & directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article, complete all as specified.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Dismantling PVC/cement/CI pipes incl fittings of 100 bore of pipes and removing, complete all as specified and directed.

Dismantling PVC/cement/CI pipes incl fittings of 75 bore of pipes and removing, complete all as specified and directed.

Demolition or breaking up drain pipe (salt glazed stone ware AC or reinforced concrete) set in cement mortar including PCC bedding haunching of 150mm bore of pipe stone, complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed.

Dismantling water tanks of any decription/pattern of RCC/PCC/PVC exceeding 250 ltr capacity but not exc 500 ltrs, complete all as specified.

Taking out the root of trees of any girth from the surface of bldgs and making good the damaged portion to match with the existing surface in CM (1:3) or with PCC (1:2:4) or BB work work in CM (1:4) and finally finishing the surfaces to match with the existing surfaces.

Pressed steel frame of size 105X60mm for doors as per IS 4351 using PBI Sheet of 1.25 mm thick with one or more rebates including mild steel hinges medium weight 100mm long and 25X3mm flat iron in holdfast. tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc. complete all as specified.

Pressed steel frame of size 125X60mm for doors as per IS 4351 using PBI Sheet of 1.25 mm thick with double rebated including mild steel hinges medium weight 100mm long and 25X3mm flat iron in holdfast. tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc. complete all as specified.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing, complete all as specified.

Solid PVC factory made door frame of size 50x47 mm made out of 5 mm wood grain printed PVC sheet and edge will be painted to match with printed sheet, reinforced with MS square tube complete all as specified and directed by the Engineer-in-Charge.

35 mm thick 2nd class hard wood plain framed factory made, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces .The size of rail and stile as per IS :1003(Part-I ) kiln seasoned and chemically pressure treated, complete all as specified.

35mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securing glass etc) size of members of shutters as specified in SSR Part-I section-8 clause 8.20 (a). complete all as specified.

19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup board shelves, pelmet box etc, complete all as specified.

Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of MES Schedule (Part-II) and directed by Engineer-in-Charge.

Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick plain colour PVC sheet on back face supply and fixing in frame at site as per specification and drawing.

Factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) openable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE : The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Fe-290 (Gde E-165) including one shop coat of red oxide primer, complete all as specified.

3mm thick sheet glass ordinary quality and glazing with and including oil putty in square exc 0.5 sqm in each pane, complete all as specified.

3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each pane, complete all as specified.

Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.00mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.

Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified.

Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed.

Mild steel butt hinges, medium weight, cold rolled, 50mm long fixed, complete all as specified.

Second class hard wood small fittings such as brakets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exceeding 200 cu.cm each complete all as specified.

300mm long ordinary rat tail Mild steel rod pattern springs including roller and roller plate, complete all as specified.

Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size, complete all as specified.

Aluminium anodised sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 300mm long, all as specified.

100 mm long hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

PCC 1:2:4 type B 1 using (20 mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping, apex stones, bed plates, lintels upto 1.5m clear span and the like including weathering slightly rounded or chamfered angles and throating with & including necessory form work, complete all as specified.

25 mm thick PCC 1:2:4 type B-1 (using 20 mm crushed stone stone aggregate) as in base course of floor finished rough to receive tile flooring, complete all as specified.

Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area each tiles exc. 0.06sqm but not exc. 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed in white cement and pigment to match the shade of tiles laid over and including15mm thick screed bed or beading layer in CM 1:6 complete all as specified.

Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white cement and pigment to match the shade of tiles laid over and including15mm thick screed bed or beading layer in CM 1:6 complete all as specified.

Glazed ceramic coloured tiles (300 x 200 mm ) x 7mm thick as in vertical surface such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick rendering in CM 1:4 to receive tiles, complete all as specfied and directed.

Machine cut green marble slab of approved shade 18-20mm thick as in cooking plateform laid over cement screed base, jointed with grey cement slurry & pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete with & including 15mm thick screed bed in CM 1:4, complete all as specified.

Machine cut kota stone slab flooring not less than 19mm thick as in flooring, treads, plateform etc bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, including cutting, grinding and mirror polishing laid over & including 20mm thick screed bed in CM 1:6, complete, all as specified and directed.

Machine cut kota stone slab not less than 19mm thick as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete fixed over & including 15mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete floor by picking sweeping down with water to remove dust etc.complete, all as specified and directed.

Brick work with subclass 'B' brick straight or curved on plan exe 6mtr mean radius in CM 1:6, complete all as specified.

Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

15mm thick cement plaster rendering in CM 1:6 on other than fair faces of bricks or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

15mm thick cement plaster rendering in CM 1:4 on fair faces of bricks or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

Rendering 5mm thck in CM 1:3 as in ceilings and similar items finished even and smooth without using extra cement upto any height including all necessary scaffolding, complete all as specified and directed.

Rendering 15 mm thick cement plaster 1:3 on other then fair faces of concrete surfaces as on facia of roof slab, chajja, shelves etc. finished even and smooth without using extra cement (incl all necessary scaffolding, lifting arrangment for three story building on external surfaces), complete all as specified and directed.

Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.

TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping to columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia, all as specified and directed.

PVC (SWR) pipes type B double socketed in any length with rubber ring joints fixed to walls of bore 110mm, complete all as specified.

PVC (SWR) pipes type B double socketed in any length with rubber ring joints fixed to walls of bore 75mm, complete all as specified.

PVC (SWR) bends type B any radius 110mm dia with each over assessed door, complete all as specified and directed.

PVC (SWR) bends type B any radius 75mm dia with each over assessed door, complete all as specified and directed.

PVC (SWR) branch piece 110 mm bore , single (single Y) equal or unequal complete all as specified.

PVC (SWR) junction single 110mm bore , (Single T) equal or unequal complete all as specified.

PVC (SWR) junction double 110 mm bore,(double T), equal or unequal complete all as specified.

PVC (SWR) couplers 75 mm complete all as specified.

PVC (SWR) reducers 110mm complete all as specified.

PVC (SWR) vent cowl 75 mm complete all as specified.

PVC (SWR) 'P’ trap 110/110 mm bore complete all as specified.

PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified.

Salt glazed stone water ware gully traps square moulthed type 'P' 150mmx150mm with excavation and earth work set in PCC M-10 (Nominal Mix) block measuring 45cmx45cm and cast iron grating incl jointing in cement mortar (1:1) all as specified.

Vitreous china squatting 'Pan' Orissa pattern 580 x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, and to flush pipe, anti syphonage pipe etc including PVC 'P' trap set in and including concrete and making good to floor in repair, complete all as specified. Make: Prayag Cat No 4055 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Vitreous china WHB flat back coloured, size 550 x 400mm with pedestal including cast iron brackets, of approved make, waste pipe of 32 mm dia and brass CP waste fitting fixed in repairs, complete all as specified and directed. Make: Prayag Cat No-4642 or equivalent cat part No of Make as specified in Appx 'F' here in after.

PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets 32mm dia PVC flush pipe etc fixed in repairs, complete all as specified. Make: Prayag Cat No-502 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed and fly-nuts, screwed for iron pipe of 15mm bore and fixed, complete all as specified and directed.

15 mm dia bib tap with flange, cast brass chromium plated fancy type screwed for iron pipes with crutch or butterfly handle, fixed in repair, complete all as specified and directed.

15 mm dia stop valve cast copper alloy fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle, screwed at both ends, complete all as specified and directed.

15 mm dia stop / angle valve cast copper alloy fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed at both ends, fixed in repair, complete all as specified and directed.

20mm stop valve (Make ISI marked) cast copper alloy of screwed down high pressure with crutch or butter fly handle , screwed with ends for iron pipe or unions fixed in repairs, complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete.

Stainless steel gratings of outer frame dia 150 mm open able type incl all necessary fitting such as hinges including embedding in tiles with white cement.

PVC connection 15mm size & 450mm long with PTMT nuts and washer, complete all as specified and directed. Make: Prayag Cat No-323 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Fixing only old steel water tubing of 15mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

Fixing only old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm and n.exe 20 cm girth in brick masonry, complete all as specified.

500 ltr capacity rotational moulded polyethylene water storage tanks, tripple layer(Cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I, complete all as specified and directed. fixed, complete all as specified and directed.

Complete removal of existing water proofing treatment of any description including under layer & bricks tiles, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off and appling the following roof treatment complete all as directed. (a) Applying 1st course of 15 mm thick screed bed in cement mortar 1 : 4 on concrete surface mixed with liquid water proofing admixture laid over neat cement slurry @ 3kg/sqm . (b) applying 2nd course of bituminous primer conforming to IS -3384 @ 0.4 kg/litre cover the surface till surface properly impregnated and in solvent oil primer evoporate completely. Contd/.... to Srl item No 87.01

(c) Applying 3rd course of AAP (Atactic polypropylene ) modified polymeric membrene 3mm thick weight not less than 3.6 kg / sqm with 160 grams / sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap .the membrene has to be laid with LPG torch and overlap sealed and finished neat all jointa and changes in direction should be coverd with cement mortar 1:3 mixed with SBR latex @ 200 ml/ bag of cement and curved before laying membarance. (d) . Applying 4th course of a coat of bonding material with blown type bitumen of grade 85 /25 heating to a working temperature of 180 degree C and applying @ 1.2 kg / sqm & appling a coat of aluminium paint complete all as specified. Note:- (i)Liquid water proofing admixture shall be measured & paid seperately. (ii) Roof treatment shall be carried out upto 4th stories of bldg or as directed by Engineer-Incharge.

Cutting out cracks to V Section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 complete all as specified and directed

PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate), laid on RCC slab as base layer for roof treatment as roof padding, complete all as specified and directed.

Preparation of surface of sunken slab and applying 15mm thick plaster in cement morter 1:4 mixed with water proofing compound both on floor and wall @ 200ml per 50 Kg bag of cement. Then apply Epoxy Resin coating with modified cement coating like Brush Bond of Fosroc/Pedilite/Bostic as per manufacture instruction both on floor and wall complete all as specified.

Stainless steel kitchen sink with drainage board made of stainless steel of 1 mm thick sheet including plugs, washers and pvc waste pipe of 40 mm dia. Fixing with complete on appropiate size of cantilever brackets of MS angle or GI pipe 15 mm dia with proper arrangment to hold and fitting of sink complete all as specified and directed at site and connecting union to pipe. The overall size of sink 915mm x 460mm and bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Stainless steel grade 430, glossy finish, wall hanging plate rack inclusive of spoon hanger, made out of 1 mm thick sheet of size 750 x 600 x 250 mm having partition as per sample kept in AGE B/R Office and fixed with steel fasterners or steel screwed complete, complete all as specified and directed.

Applying two coats of white wash including preparation of newly plastered surfaces of wall complete all as specified.

Applying two coats of white wash including preparation of old treated plastered surfaces of wall complete all as specified.

Applying two coats of white wash including preparation of newly plastered surfaces of ceiling, complete all as specified.

Applying two coats of white wash including preparation of old treated plastered surfaces of ceiling, complete all as specified.

Applying two coats of oil bound distemper on walls over one coat of chalk whitening including preparation of new or previously untreated surface, complete all as specified..

Preparation of old treated plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade, complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of chalk whitening, complete all as specified.

Preparation of old ,treated plastered or unplastered surfaces including brooming down or steel wire brushing,scrapping down smokesoot,moulds,moss and efflorescent salts and trading oil greasy spots, and applying two coats of cement base paint on walls, complete all as specified

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified.

Applying two coats of synthetic enamel paint to new or previously treated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

Two coat of synthetic enamel paint over a coat of pink primer on new untreated wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

Preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying two coat of synthetic enamel paint, complete all as specified.

50 mm thick cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as plinth protection and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed

PVC caoted mild steel drapery rods of 25 mm dia complete with coloured conical end balls at both end, dia not less then 50mm and fitted with and including MS/PVC sheeted / powder coated bracket size 150mm made to shape or 75mm dia PVC / PVC coated coloured end wall to wall round block made to shape in male and female pieces as required at site fixed in repairs, complete all as specified and directed.

Plain cement concrete 1:3:6 type C-0 using 12.5mm graded stone aggregate as in back filling of pressed door frame, complete all as specified.

Magic eye in wooden door shutters, ultra clear 180 degree door type, wide angle lence for alround visibility, complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good disturbed surface of walls and roofs to match the existing surface, complete all as specified and as directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked 25mm dia terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/bell point controlled by one, one way switch including cutting chases and making good to disturbed surfaces of wall / ceiling / floor including treating with existing finishes, complete all as specified and as directed.

Description all as per item No.112 above but for 3 Pin socket outlet 5 Amps point on same board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.

Description all as per item No.112 above but for 3 Pin socket outlet 5 Amps point on independent board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.

Description all as per item No. 112 here in before but for 3 Pin socket outlet 15 Amps point on independent board other switches with with PVC insulated copper conductor cable 2.5sqmm 1100 Volts grade, complete all as specified and directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated and unsheathed heavy duty cable drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light point controlled by two way switch, complete all as specified.

Socket outlet multipurpose combination 2 in 1, 5 Amp flush type universal, complete all as specifed.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

LED lamp 9W, 240 volts, complete all as specified and directed.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Switch piano flush type 16 Amp single pole one way, (ISI marked), complete all as specified.

Bell push piano flush type 6 Amp, (ISI marked), complete all as specified.

Musical door bell, 230 volts AC supply all as specified and directed by Engineer-in-Charge.

Fan regulator stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. .

Sheet metal enclosure factory made distribution board TPN IP 43-'IK 08 with bus bars neutral links blanking plates double door suitable for FP MCB as incommer and out going SP/TP MCBs 4 ways complete all as specified and directed. . Make:-Legrand Cat part No :-5077 45 or equivalent cat part of make as specified in Appx "F" here in after. Note:- MCBs shall be measured and paid separately

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand Cat Part No 4086 09 to 4086 17 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB triple pole neutral 63 Amp with rupturing capacity 10 KA 'C' series fixed in repair, complete all as specified and directed.Make:-INDOASIAN Cat Part No 811220 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sheet metal enclosure factory made distribution board Triple pole and neutral with bus bars neutral links blanking plates double door suitable 4 ways complete all as specified and directed.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

LED streetlight 45 Watt 5700K made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 complete with hosing with all accessories pre wired with and including 40mm dia (max) GI pipe bracket of 1.2 mtr made to shape as required fixed on wall or pole with FI clamp of required shap & size, not, nolts, washers and making connection with three core copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:-Havells Cat Part No:-LHETA XU7PN6J045 or Equivalent cat part of make as specified in Appx 'F' here in after.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 35 Sqmm x 3.5 core, complete all as specified.

Dry river sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps, nuts bolts etc, complete all as specified.

M/s Koul & Sons

M/S STAR CONSTRUCTIONS

Jagbir Singh and Co