Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.8 LAccepted-AOC | L1 | Accepted-AOC Found lowest and resonable | |
| 2 | L2₹55.0 L+₹11.8 L (27.3%)Rejected-Finance 289 KASERU KHERA MAWANA ROAD MEERUT 250001 U P | MEERUT | UTTAR PRADESH | 250001 | L2 | Rejected-Finance In order but L2 | |
| 3 | L3₹55.7 L+₹12.5 L (29.0%)Rejected-Finance 114 SHASTRI NAGAR MEERUT | MEERUT | UTTAR PRADESH | 245206 | L3 | Rejected-Finance In order but L3 | |
| 4 | L4₹61.8 L+₹18.6 L (43.1%)Rejected-Finance | L4 | Rejected-Finance In order but L4 | |
| 5 | Rejected-Technical 202 NEW RAM VIHAR COLONY PINTO PARK MORAR GWALIOR 474005 | GWALIOR | GWALIOR | MP | 474005 | - | Rejected-Technical Due to no remark in WLR |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
3 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(U)E/M Meerut
Roorkee Road Meerut
REPAIR/REPLACEMENT OF LT CABLES, MCCBS AND ALLIED WORKS IN NORTH AREA UNDER AGE E/M ELECT SUPPLY AT GE (U) E/M MEERUT CANTT
2022_MES_516715_1
8417/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Meerut
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE(U)E/M Meerut
₹96,000
Yes
29 Jun 2022
5 Apr 2022
5 May 2022
5 Apr 2022
3 May 2022
19 Apr 2022
90 days
Amount
Supply, laying, jointing, testing and commissioning LT underground cables, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-7098 (marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed. for the following sizes:- Note;-(i) Rate quotted includes terminal Lugs / road cutting/ wall cutting/ floor cutting and making good damged portion matching with existing surface with all existing finishes.) including taking down old unserviceable cable from trench/ ducts/ poles, walls/ under roads or other situations. (ii) Excavation & earthwork, duct work, GI pipe for laying of cable and sand cushioning / cable protection covers etc here in after shall be measured & paid for separately under respective items of Sch `A')
(a) 25Sqmm 4core
(b) 35 Sqmm 3.5 core
(c) 50 Sqmm 3.5 core
(d) 70 Sqmm 3.5 core
(e) 120 Sqmm 3.5 core
(f) 185 Sqmm 3.5 core
(g ) 240 Sqmm 3.5 core
(h) 300 Sqmm 3.5 core
Relaying laying, jointing, testing and commissioning LT underground cables, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-7098 (marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete including taking out old cable of any sizeall as specified and directed. for the following sizes:- Note;-(i) Rate quotted includes terminal Lugs / road cutting/ wall cutting/ floor cutting and making good damged portion matching with existing surface with all existing finishes. (ii) Excavation & earthwork, duct work, GI pipe for laying of cable and sand cushioning / cable protection covers etc are beyond the scope of this item and shall be measured & paid for separately under respective items of Sch here in after.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in Soft/Loose soil including trimming sides and bottom of trenches complete all as specified in the following type of soils:
Returning, filling-in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified in the following type of soils
Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.
Material and labour river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables complete all as specified. Punned thickness of sand shall be measured and paid only.
M & L Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm as directed.
Supply and laying galvanised steel water tubing, light grade, IS-1239 marked with all fittings (IS marked) and laid in trenches / under roads / in drains / fixed to poles/walls ( with required size flat iron clamp bolts, nuts and washers ) pipes including taking out of old pipe of the following sizes :-
(a) 50 mm bore
(b) 80 mm bore
(c) 100 mm bore
M&L for auguring of hole suitable for passing 40mm to 100mm bore pipe in true horizontal position under road, PCC paths etc., by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line specified and directed coming in the route not exceeding 1.5 m in depth below existing surface level of road and not excd 30M in length complete all as specified. Note: Pipe shall be measured and paid separately under appropriate items and any dahage to existing cables of anytype shall be made good by the Bidder without any extra cost to department.
Supplying, transporting to site, erecting, and fixing in position, steel tubular swaged and welded poles of Overall height 9 metres, type 410 SP-31, IS-2713 marked, with mild steel base plate (fillet welded to poles), pole cap / finial taper plug, bolts, nuts, washers etc, including including taking out old pole and painting on the outside with two coats of aluminium paint over a coat of red oxide primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and painting 03 nos band /strips with fluorescent , PO box red synthetic enamel paint ( 30 cm wide each) at a distance of 30 cm from plinth block and numbering of poles, complete all as specified and directed by Engr-in-Charge.(Note:- Poles shall be swaged and welded at manufacturer’s factory and not at site. The inner surface shall be factory painted)
M&L PCC (1:4:8)type D2 with 40 mm graded crushed stone aggregate infoundation(below pole , all as specified and directed.
M&L cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate for foundation of stay assembly/struts/pole etc. (around the poles in pit) , all as specified and directed.
M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate for coping / pedestal of poles including necessary form work, fair finishing to exposed surfaces using extra cement
Supply and fixing pre-fabricated MS structural steel (IS marked) work consisting of channels / angles / other sections etc of various sizes and shape, cut / weld / drilled holes etc hot / cold in position for cross arms with FI clamps (full, half D and earth clamp etc) incl necessary MS bolts, nuts etc and painting, all as directed and specified.
Material and labour aluminum conductor steel reinforced (ACSR), ISI marked, laid overhead on poles, including straining and stretching binding and jointing the conductor with and including 14 SWG binding wire complete, including taking down all as specified and directed
M&L provision of anti-climbing device, spikes type, in two halves made to shape to suit the cross section of the pole, fabricated out of MS bars (round, square and flat) welded to MS flat including nuts, bolts, washers etc complete including taking out all as specified and directed.
Supply and fix danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white, of size 20 x 15cm with letter, figures and conventional skull bones in signal red colour and fixed with mild steel clamps (made of 25x3 mm MS flat iron) nuts, bolts and washers etc for LT poles / pillar box etc with voltage and danger indiated in Hindi and English complete all as specified and directed.
Supply and fixing stay assembly in repairs for LT poles complete, comprising of galavanised steel stranded stay wire 7 / 3.15 mm, galvanished steel stay bow 400 x 14, galvanized steel rod 2150 mm long 16 mm dia with nut bolts and washers, steel plate 230 x 230 x 6mm thick , 2 nos thimbles , loop insulator size 65 x 90 mm clearance hole 16 mm including clamps and fixed to stay clamp complete all as specified. (Note : Rate quotted includes Excavation, earth work and PCC )
Supply and fix in repair pin type insulator, porcelain, vitreous white, size 100mm height and 65mm dia, 1100 Volts grade, ISI marked, including one galvanised mild steel spindle, two Nos GI washers and one GI nut complete,all as specified and directed.
Supply and fix in repair shackle type insulator, ISI marked, porcelain, vitreous white, 1100 volts grade, ISI marked of size 90 x 75 mm, including galvanized mild steel strips 31x3 mm, washers, insulators bolts (12 mm dia), washers and nuts all as specified and directed.
M&L plate earthing for sub station equipments complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 3.5 m below normal ground level) with the top edge of the earth plate at a depth not less than 2.75 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of HT/LT equipments etc at the other, earth strip encased in and including 40mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate excavation & earth work and RCC cover complete all specified and shown in electrical plate No 5 of SSR Pt-I.
M&L rubber insulation sheet mat suitable for 11 KV grade for electric installation , shock proof, and chequered / plane of size 1M x 2M x 19.0mm thick complete all as specified.
Supplying and fixing STRAIGHT THROUGH cable jointing Kit for 1100 V grade cable for complete with jointing material ( heat shrink type) and accessories suitable for 25 sqmm to 50sqmm 3.5/4 core XLPE armoured aluminkium conductor cable and testing aftre jointing complete all as specified and directed.
Supplying and fixing STRAIGHT THROUGH cable jointing Kit for 1100 V grade cable for complete with jointing material ( heat shrink type) and accessories suitable for 70 sqmm to 150sqmm 3.5/4 core XLPE armoured aluminkium conductor cable and testing aftre jointing complete all as specified and directed.
Supplying and fixing STRAIGHT THROUGH cable jointing Kit for 1100 V grade cable for complete with jointing material ( heat shrink type) and accessories suitable for 185 sqmm to 240sqmm 3.5/4 core XLPE armoured aluminkium conductor cable and testing aftre jointing complete all as specified and directed.
Supplying and fixing STRAIGHT THROUGH cable jointing Kit for 1100 V grade cable for complete with jointing material ( heat shrink type) and accessories suitable for 300 sqmm to 400sqmm 3.5/4 core XLPE armoured aluminkium conductor cable and testing aftre jointing complete all as specified and directed.
Cutting of worn-out / burnt aluminium cable terminal lugs from the HT/LT cable , crimping of new aluminium cable core and fixing with transformer/ Panel MCCB terminal/ FPB/ JB/ pole/DBs/ stud including cutting/ dressing of cable, disconnecting under ground / OH line cable conductor , cutting down worn-out portion and refixing with suitable lugs complete , including under ground cables of any type and size for repairs including taking out under ground cable loop from ground and making connections of restoration of electric supply complete all as specified. Note:- aluminim Bus bar/ Excavation, earth work , taking out cable protection covers, and sand cushion and relaying the same shall be deemed to be included in the unit rate quoted by Contractor)
Releasing the binding of ACSR conductor of OH lines from insulator , removing the jumper, connector, service wire, disconnecting the connection of UG cables and restretching of existing HT/LT OH lines , any size, length and span upto desired sag as designed by Engineer-in-Charge and rebinding the ACSR Conductor on insulator , reconnecting the UG cable etc complete all as specified. (Note :- Linear length centre to centre of the poles multiplied by No(s) of line wire restretched shall only be measured for the purpose of payment)
Trimming/ lopping branches of tree touching to LT/HT OH lines / two pole structre/ 4 pole structre/ not exceeding 30 cm girth , shrub, vegetation, bushwwod and saplings at least upto 3 M from outer edge of ACSR including removing of braches of trees etc. to a distance exceeding 100 m and not exceeding 500 M complete all as specified and directed. Note :- (i) Shutdown wherever required shall be taken in writtig from Engr-in-Charge.
M&L preparation of old painted surfaces erected steel tubular swaged poles / Rails/Girder poles of LT over head line ( Except embedded portion) , 9 M long including all MS work mounted on pole , earth protection & water pipe ( if exists) and providing one coat of aluminium paint and providing 05 Nos bands/ straps with Two coats of synthetic enamel paint ( black & yellow and Black and red white 30 cm wide each) from top of plinth block and numbering of poles with white synthetic enamel paint on yellow synthetic enamel paint ground (50mm wide and 100mm high letters) including encircling the letters or figures complete all as specified
Finding out fault in any size of cable, 1100V grade to 33000V with the help of Fault Testing Van by disconnecting of cable from both sides and making connection after fault finding and repairs upto a length of 500m complete all as specified. Note:- All the equipments, tackle, T&P, Fault finding/ testing Van etc shall be arranged by contractor at hos own cost. The rate quoted by contractor shall deem to be included and nothing extra shall be allowed.
Taking down Existing unsv MCCB any Size from any panel and S& F MCCB 4 Pole, Microprocessor Based 630A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, protection,s along with Spreader terminals and connecting with Existing connection (Note : Rate quotted includes terminal lugs ) (Make : Siemens: / L&T/ Schneider )
Taking down Existing unsv MCCB any Size from any panel and S& F MCCB 4 Pole, Microprocessor Based 500A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, protection,s along with Spreader terminals and connecting with Existing connection (Note : Rate quotted includes terminal lugs ) (Make : Siemens: / L&T /Schneider )
Taking down Existing unsv MCCB any Size from any panel and S& F MCCB 4 Pole, Microprocessor Based 400A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, protection,s along with Spreader terminals and connecting with Existing connection (Note : Rate quotted includes terminal lugs ) (Make : Siemens: / L&T /Schneider )
Taking down Existing unsv MCCB any Size from any panel and S& F MCCB 4 Pole, Microprocessor Based 350A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, protection,s along with Spreader terminals and connecting with Existing connection (Note : Rate quotted includes terminal lugs ) (Make : Siemens: / L&T/Schneider )
Taking down Existing unsv MCCB any Size from any panel and S& F MCCB 4 Pole, Microprocessor Based 250A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, protection,s along with Spreader terminals and connecting with Existing connection (Note : Rate quotted includes terminal lugs ) (Make : Siemens: / L&T/ Schneider )
Taking down Existing unsv MCCB any Size from any panel and S& F MCCB 4 Pole, Microprocessor Based 200A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, protection,s along with Spreader terminals and connecting with Existing connection (Note : Rate quotted includes terminal lugs ) (Make : Siemens: / L&T/ Schneider )
Taking down Existing unsv MCCB any Size from any panel and S& F MCCB 4 Pole, Microprocessor Based 160A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, protection,s along with Spreader terminals and connecting with Existing connection (Note : Rate quotted includes terminal lugs ) (Make : Siemens: / L&T / Schneider )
M&L for preparation of old painted surfaces erected / cleaned by rubbing with wire brushes / knife on all side rusted area Existing LT panel / Feeder pillar box / junction box including all MS work / providing the existing suitable applying two coats of approved colour paint by spray gun over a coat of red oxide primer and making it absolutely good finished incl welding work complete with the specified size of MS plain sheet and angle iron to panel Made hinges/ door/ handle paid separately schedule all as directed by Engr-in-charge.
M& L for aluminium Bus bar 1100 volts capacity and various size of Amps load capacity with colour code insulation insulated / making hole , nuts/ bolts/ washers with fixed the existing LT panel board / FPB/ JBs / Transformer complete including removing unsv old bus bar all as directed by Engr-in-charge.
Shikha Enterprises
Jain Traders
Ravi Electrical
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .