Annual Repair to Old Nursing Hostel (G plush 3) at MKCG Medical College and Hospital at Berhampur as per Letter No. 25587 Dtd. 08.12.2025 of DMETO Buildings.

R.C.C. work (1:1.5:3) M-20 having minimum compressive strength in work test of 200kg/square meter in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and 516 using 12mm to 20mm size (20mm not to exceed 25%) hard black broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete, watering and curing for 4 weeks centring, shuttering and finishing the exposed surfaces smooth providing grooves to beads where necessary, providing drip cess and proper randy the joint with wall surface where necessary and providing fan hooks as per requirement and ceiling smooth to receive white washing or painting including cost, conveyance, royalties, of all materials and labour with T&P required for the work etc .complete in all respect but excluding cost of binding wire of 18 to 20 gauge and labour charges for straightening cutting bending binding and laying the grills and placing in proper position etc. complete as per specification and direction of the Engineer-in-charge. (excluding GST) Shelve

Straightening bent up or coiled HYSD rods, cutting bending cranking hooking welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding tying the grills, hoisting, lowering and placing in proper position as required for RCC works with cost conveyance of m. s. rods or tor steel and binding wires of 18 to 20 gauge and labour with T&P required for the work etc. complete in all floors (weight of binding wires will not be made on weight of m. s. rods or tor steel only).(excluding GST)

FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Superstructure using clamp burnt bricks of 9 size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST)

16 mm (5/8) thick cement plaster (1:6) finished smooth to inside surface of 9 thick brick walls/stone masonry after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST)

12mm (1/2) thick cement plaster (1:6) finished smooth to outside/inside brick walls after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST)

6mm (1/4) thick cement plaster (1:4) to R.C.C. surfaces finished smooth including close deep chipping and slurry treatment including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST)

Supplying fitting and fixing of GRANITE TILES (upto 0.10 sqm) in floors 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST)

Supplying fitting and fixing of CERAMIC TILES (upto 0.10 sqm) in dado 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST)

Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

Providing fitting and fixing of WINDOW (SLIDING TYPE) made of aluminium section 9778 as windows frame section no. 4096, 9777 and 3994 as shutter frame with 5mm thick fibre glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all cess labour T&P etc. complete as per direction of the Engineer-in-charge. (excluding GST)

Supplying providing fixing of MS grill/gate/window with cost and conveance royality and taxes of all materials and labour with T&P required for the work etc complete in all respect as per drawing and techincal specification and as directed by the engineer in charge. Excluding GST)

Enamel painting two coats with any approved paint over a coat of priming to WOOD work and IRON work including cost of the primer and sand papering polishing the surface with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

Providing fitting and fixing of PARTITION walling OEL aluminium anodized section no. 9210 and 9207 as single groove and double groove respectively and horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick pre-laminated board (Nova pan make) and jointing angle no. 1855 etc. with cost of all materials, labour cess etc. complete. (excluding GST)

Providing and fixing of aluminium door with OEL anodized aluminium DOOR section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapperd clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including cost conveyance cess of all materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-Charge. (excluding GST)

Wall painting two coat with WEATHER COAT of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

Supplying fitting and fixing WPC (wood polymer choukhat) including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST)

Supplying fitting and fixing 32mm thick FLUSH DOOR both side skin moulded at in back and the size of outer frame being of 33 x 57 mm. Accessories/gaskets are to be used as per the manufacturers supply and specification like handle, lock and floor spring of approved quality including cost conveyance and labour with T&P etc. complete. (excluding GST)

Please Enable Macros to View BoQ information