RMO E and M Services installed at Delhi High Court, New Delhi (SH Misc Electrical Work and upgradation of existing system)

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 4 sq. mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

3 Module

6 Module

12 Module

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole

Triple pole and neutral

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.

100 A, 16 KA,TPMCCB

125 A, 16 KA,TPMCCB

250 A, 25 KA,TPMCCB

400 A, 35 KA,TPMCCB

630 A,50KA,FPMCCB

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, Installation, Testing and Commissioning of Enterprise Grade Layer-3 Network Switch of 1U form factor, suitable for mounting in standard 19” rack, having x86-based CPU architecture and operating on a common OS across all switches for seamless integration and centralized management. The switch shall be provided with minimum 24 nos. 10/100/1000 Base-T ports and 4 nos. 1/10G SFP+ ports (all modules populated from Day-1) and shall support PoE (IEEE 802.3af) and PoE+ (IEEE 802.3at) standards with minimum 370W PoE power budget. The switch shall have 1 no. RJ45 console port, USB or equivalent memory slot for backup, and field-replaceable power supply modules. It shall support stacking through dedicated stacking/uplink ports with minimum 48 Gbps stacking throughput and all required accessories for stacking shall be provided from Day-1.

The switch shall be of non-blocking architecture with minimum 128 Gbps switching fabric and 95 Mpps forwarding rate, equipped with minimum 2 GB RAM, 2 GB Flash and 6 MB or higher packet buffer, and shall support minimum 16K MAC addresses and 3K IPv4 routes or more. The switching system shall comply with IEEE standards 802.1D, 802.1s, 802.1w, 802.1x, 802.3ad, 802.1AE, 802.3x, 802.1p and 802.1Q, and support Static Routing, RIP, OSPF, PBR, PIM, VRRP, IGMP/MLD Snooping (v1/v2/v3), 802.1p class of service, traffic marking, policing, shaping and strict priority queuing with eight egress queues per port. The switch shall support MACSec (IEEE 802.1AE), Port Security, DHCP Snooping, Spanning Tree Root Guard, First Hop Security, 802.1x authentication and accounting, IPv4/IPv6 ACLs and Dynamic VLAN assignment.

The system shall support cryptographically signed OS and firmware ensuring authenticity and integrity verification during boot. Management shall be supported via CLI, GUI (Web Interface), SSHv2, SNMPv2c/v3, IGMP, and comprehensive programmability through Model-Driven Programmability, NETCONF/REST APIs or equivalent. Switch and fiber modules shall be from the same OEM. The switch shall conform to safety standards UL 60950, IEC 60950, CSA 60950, EN 60950 and shall be tested for EAL2/NDPP/NDcPP or above under Common Criteria Certification. The item includes all accessories, cables, interconnections, installation materials, testing and commissioning as required to complete the work with license & 3 years wear Guarantee/Warranty in all respects as per specifications and direction of Engineer-in-Charge.

Dismantling of old Worn Out material from existing position and credit under buyback:

1.5/4 sqmm Cu wire, switch, socket, modular sheet, MCB, MCCB, Network switches and associated accessories etc as required.