Loading
Loading…
Loading…
Tender Value
₹2.1 L
EMD Value
₹4,286
Closing Date
8 Oct 2026, 3:30 pmClosed
Executive Engineer
IWD, IIT Kanpur
SITC of street light near canteen, mess and other various locations in GH1 and elsewhere in IIT Kanpur
2026_IITK_928418_1
68/EE/Elect/2026-27
Open Tender
Electrical Works
Percentage
90 days
IIT Kanpur
As per tender
3 documents required · 3 mandatory
₹0
₹4,286
30 Sept 2026
30 Sept 2026
9 Oct 2026
30 Sept 2026
8 Oct 2026
30 Sept 2026
30 Sept 2026 - 6 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying & drawing following sizes of FRLS PVC insulated copper conductor single core cable in / on the existing surface / recessed, PVC / steel conduit as reqd. | |||||
| 1.1 | 3 x 1.5 Sq.mm.. | 10 | Mtr. | 103 | ₹1,030 |
| 2S & F MCB of following pole and rating 240/415 volts, 10kA, 'C' series in the existing MCB DB complete with connection, testing & commissioning etc as reqd. | |||||
| 2.1 | Single Pole 6 amp to 32 amp | 1 | Nos. | 282 | ₹282 |
| 3LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66, IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM- 21-11 report, CCT 3000°K/ 4000°K/ 5700°K/ 6500°K (As per ), SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq. mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). | |||||
| 3.1 | 36 watt | 18 | Each | 1,730 | ₹31,140 |
| 4Laying of one no. PVC insulated, PVC sheathed / XLPE power cable of 1.1kV grade of size upto 35 sq.mm. | |||||
| 4.1 | direct in ground I/c excavation, sand cushioning, protective covering and refilling the trench etc. as reqd. | 1 | Mtr. | 449 | ₹449 |
| 4.2 | In pipe | 80 | Mtr. | 47 | ₹3,760 |
| 4.3 | In open duct | 8 | Mtr. | 36 | ₹288 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.09 MB
Tendernotice_2.pdf
PDF • 1.33 MB
BOQ_975674.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .