Estimate of Supply Erection and Commissioning of various electromechanical equipment like VT Pump Electric Motors Starter Panel and other allied accessories at PH No 6 and 7 of Ch Bansi Lal Canal Jui Canal in Lift WS Mech Division Bhiwani

Supply Erection & commissioning of 35 cs VT Axial flow vertical turbine pumps of 980 RPM having static lift 23 feet including MS delivery pipe as per site reqirement & MS delivery bends of min. 8 mm thickness with bituminous based paint i/c flange welding, HT nut bolts, Siphon breaker valve with mouth bends complete in all respect as per site & as per approved technical specifications.

Supply Erection & commissioning of 20 cs VT Axial flow vertical turbine pumps of 980 RPM having static lift 23 feet including including MS delivery pipe as per site reqirement, MS delivery bends of min. 8 mm thickness with bituminous based paint inside & outside i/c flange welding, HT nut bolts, Siphon breaker valve with mouth bends complete in all respect as per site & as per approved technical specifications.

Supply, erection & commissioning of solid shaft 100 HP, 380 V (+,- 10%), 50 Hz, 980 RPM, IE2, vertical flange mounted squirrel cage induction motor suitable for 20 cs VT pump complete in all respect as per technical specifications

Supply, erection & commissioning of solid shaft 200 HP, 380 V (+,- 10%), 50 Hz, 980 RPM, IE2, vertical flange mounted squirrel cage induction motor suitable for 35 cs VT pump complete in all respect as per technical specifications

Supply, erection and commissioning 100 HP Panel fully Automatic dry type starter with ATS, 250 Amp. MCCB, Contactors 250,110,80 Amp., Micro Controller based protection relay CT’s including suitable capacitor bank having all types of protections i.e.UV/OV/ over current, phase loss/phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, seperate relay for single Phase protection etc.with all allied accessories with 35 Mtr compatible 3 Phase Cu cable from motor to panel/starter in all respect as per site requirement for 20 Cs. VT Pumps as per approved technical specifications.

Supply, erection and commissioning of Motor Control Centre/LT Panel of 800 Amp with main incomer, 4 no. outgoings feeders with Fully Automatic ATS Starters (complete in all respect like relays, indicators timer etc.) suitable range ACB, MCCB, Airbreak Contactors, indicators, relays, meters, push buttons, bus bars, micro controller based fault protection devices/relays, emergency Stop button, along with an additional MCB of 63Amp for lighting loads, with additional arrangement of ON/Off switches in front of motor for every starter with designed Capacitor bank of suitable capacity with 8 step APFCR, Selector Switch, duty contractors, discharge resistors, digital display instruments & other allied accessories for automatic as well as manual operation of Capacitor Bank suitable for 4 no motors of capacity 100 HP each with a stand of MS Channel/angle (1 feet up from floor) & degree of protection as per IP-54 as per approved technical specifications & makes of the department.

Supply, erection and commissioning of Motor Control Centre/LT Panel of 800 Amp with main incomer, 3 no. outgoings feeders with Fully Automatic ATS Starters (complete in all respect like relays, indicators timer etc.) suitable range ACB, MCCB, Airbreak Contactors, indicators, relays, meters, push buttons, bus bars, micro controller based fault protection devices/relays, emergency Stop button, along with an additional MCB of 63Amp for lighting loads, with additional arrangement of ON/Off switches in front of motor for every starter with designed Capacitor bank of suitable capacity with 8 step APFCR, Selector Switch, duty contractors, discharge resistors, digital display instruments & other allied accessories for automatic as well as manual operation of Capacitor Bank suitable for 2 no motors of capacity 100 HP & 1 no motors of capacity 200 HP each with a stand of MS Channel/angle (1 feet up from floor) & degree of protection as per IP-54 as per approved technical specifications & makes of the department.

7 Supply, Erection & Commissioning of MS Components duly primer & bituminous paint inside & outside with all civil work (A) MS Grating of size 40x40x6 mm & MS Flat 35x5 mm (B) Trash rack of size as per actual site requirement MS Trash rack should be made by MS angle 50x50x6 mm & MS Flat 50x6 mm (These sizes may be changed as per site requirement) (Complete in all respect including the civil work as per site condition/requirements).

Providing & fixing of lighting arrester with lightening striking counter within protection radius of 100 Mtr alongwith its earthing as per site requirement

Supply, erection and commissioning of M.S delivery Pipes 20 inch inner dia at various sites (equal to or less than 6 mtr length of pipe) and each pipe of 8 mm thickness both end welded with flange made of MS Plate as per approved specification & Make. (Including HT Nut & Bolt, Rubber Sheet 1/8"/packing & other fitment accessory required).