PROVN OF 03 X TOILET BLOCKS FOR AGNIVEERS AT AOC CENTRE UNDER GE(SOUTH) SECUNDERABAD.

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil.all as specified and directed.

Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all as specified and directed.

M&L for Cement concrete type D 2 1:4:8 (40 mm graded aggregate) in foundation filling and mass concrete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) Complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc to any radius, half brick walls, built in CM (1:4) Complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or TMT bars all as specified and directed.

all as per item No 6 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders TMT barsall as specified and directed.

M&L Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc.rough finished surfaces of concrete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering all as specified and directed.

M&L broken stone or boulder hard core of gauge exc63 mm but n exc 100mm deposited spread and levelled in layers n,exc 15 cm thick watered and rammed to true surface all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters, truss, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or coneecting plates Fe 410-W (Gde E 250) Quality - A all as specified and directed.

S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified.

S&F pre painted gal valume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screwsall as specified and directed.

Returning filling in including spreading, levelling watering and well ramming in layers not exc 25cm thick all as specified and directed.

Spreading and levelling in layers n exc 25 cm thick incl well ramming including watering as required including all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (40mm graded aggregate) as in sub bases, sub flooring finished even and rough all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection finished even and smooth without using extra cement all as specified and directed.

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate as in floor base all as specified and directed.

Rendering 10mm thick of fair faces of brick work or concrete surfaces cement plaster 1:6 finished even and fair without using extra cement all as specified and directed.

Rendering 15mm thick in (2 coats) (10mm thick 1:6 and 5mm thick 1:4 on top) finished even and fair without using extra cement all as specified and directed.

S&F Figured glass, pin head type 3mm thick and glazing with aluminium glazing clips in square n.exc 0.5 sqm in each pane all as specified and directed.

S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks. complete all as specified & directed.

M&L for glazed ceramic coloured tiles of size 300x450x7mm thick in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:6 complete all as specified.

M&L Non skid coloured ceramic tiles300x300mm x 7 to 8mm) thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

S&F of factory made solid PVC moulded shutter with 28 to 30mm thick(stiles)with 2,4 or 6 raised panel design with 2mm thick moulded PVC prelam sheet on the front face and 2mm thick plain colour PVC sheet on back face with particle board core all as specified and directed.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing all as specified and directed.

S&F of Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100mm type C-21 all as specified and directed.

S&F of aluminium anodised barrel tower bolts of extruded section and fixed 150mm all as specified and directed.

S&F of extruded aluminium handles fabricated type anodised 100mm all as specified and directed.

S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed

S&F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed

M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet in 75mm all as specified and directed.

S&F for 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F for Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed.

M&L for painting to cement plaster surfaces with two coats of Cement base paint over a coat of alkali resistant primer after preparation of surface all as specified and directed.

Preparation of newly plastered wall surfaces and applying three coats of white wash all as specified and directed.

M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer all as specified and directed.

Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe all as specified and directed.

Supply and fix PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore with access doors all as specified and directed.

S&F PVC (SWR) Vent cowls of bore 110mm all as specified and directed.

S & F 15mm bore Swan neck body pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( Min wt 90 gms) all as specified and directed.

S&F Towel Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( Min wt 190 gms) all as specified and directed.

S&F Vitreous china counter sunk wash basin, white, oval shape excluding ditto but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement, including all fittings cistern, brackets, flush pipe, spreader, push tap, waste coupling, grating, etc Complete set incl all fitting & fixtures as specified and directed.

S & F Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I all as specified and directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard or dense soil all as specified and directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade drawn through and including new non metallic rigid PVC concealed conduit medium grade , ISI marked , 20 mm bore with conduit accessories for wiring concealed in wall, including provision of fabricated branded pressed steel terminal box concealed of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards/sockets/regulators of any size modules for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for (a) onelight point/ fan point. Note : (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting & chases required width and depth for concealled conduit including PCC plastering,POP putty, making good to disturbed surface, distemper painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor. (3) Three runs wire & one run of PVC conduit,metal Sunken box, modualr frames & connected accessories shall be measured as one point

All as per item No 60 here in before but with cable 2.5 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed by the engineer-in-charge.

Supply and fix Modular switch 1 way 6A , 1-module complete all as specified and directed by the engineer-in-charge.

Supply and fix Modular switch 1 way 16A with indicator, 1-module complete all as specified and directed by the engineer-in-charge.

Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module complete all as specified and directed by the engineer-in-charge.

S & F 3 pin, 6 A, 250 V ceiling rose having terminal capacity 3 X 1.5 mm² IP 20 protection complete all as specified and directed by the engineer-in-charge.

Supply and fix exhaust fan, metal body AC single Phase. 230V of size 300 mm sweep,RPM 1200 with, blades, and frame and louvers complete including making suitable size hole in wall for fixing of fan complete all as specified and directed by the engineer-in-charge. Make: Havells Cat part No:Ventil air DSB /Gold Medal EFS851012 HAVAC PLUS /Crompton drift air plus300mm/Bajaj-Supreme plus/Luker cat part No:TuuliLME12 Note: Exhaust fans are replaced against BER.

S & F 20 W surface / wall mounted LED batten light fitting aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ PHILIPS BN308CLED20S-6500L120PSUWH / WIPRO LL31-251-XXX-65AL5/Havells ENDURALINEARPROBS20WLED865PCSSIND/Bajaj-BCLAB20WCWLEDXT

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect as specified and directed by engineer-in-charge.complete in all respect as specified and directed by engineer-in-charge. Make:Crompton TRP-409-45-57-SL-GL-NSG / PHILIPS BRP331LED48CWR5NPCPSUS1V1 / HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC /WIPRO LR22-501-XXX-57-XX/Bajaj-VISTAP45LWHPOPCSD

S & F single pole & neutral, double door, metallic distribution board 8 ways conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP MCB as incomer and SP MCBs as outgoing, complete all as specified and directed

S&F of MCB SP 6 to 32 Amps 'C' series complete all specified and directed

S&F of MCB single phase and neutral (SPN), 40 Amps, 230 Volts, connecting with lugs, complete all as specified and directed

Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete incl taking down old one all as specified and as directed.

M&L for earth continuity conductor 4 Sq.mm dia GI or steel wire

M&L for chequered cement concrete tiles of size 300x 300x25mm thick set, jointed and ointed in neat cement slurry in floors with grey cement and no pigmnet to match with the colour of tiles over and including 20mm thick screed bedding layer in cement mortar 1:6 Complete all as specified and directed.

M&L for painting to cement plaster surfaces with two coats of Cement base paint over a coat of alkali resistant primer after preparation of surface Complete all as specified and directed.

M&L for GI tube medium grade with all fittings ( as required at site) laid in trenches incl connecting with existing lines all as directed for the following sizes

25 mm dia

50 mm dia

Cutting existing steel tubing for alternations or additions and screwing existing steel tubing for alternations or addtions or lengthening screwed on pipe to from connector of following sizes.

50mm to 80 mm dia

M&L for fixing GM globe gate valve with iron wheel head screwed both end for iron pipe and fixed for the following bore of pipe

25 mm dia

50 mm dia

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/ dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core

Cutting the existing road straight by manual, depth and width not less than 1 mtr below ground level for passing of underground cable and filling back with excavated soil upto 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed. Note: Necessary work permissions for the works to be carried in Civil/Public ares/Defence areas to be taken by the contractor prior to starting the work. Laision with concerned departments is the responsibility of contractor. Department will do the necessary authorised correspondence for the said approvals. No extra payment will be entertained on this account.

Spreading riddled earth ( after preparation of excavated earth) in Cable duct with sand cushioning of cable laid in trenches complete all as directed by Engineer-in-Charge Note:- Punned thickness 18 CM( 6.25 Cm below cale and 11.75 cm above cable) will be measured for payment purpose. Quoted rate inclusive of all arrangement as mentioned.

Supply and Laying bricks, common burnt clay building bricks, sub class 'B' of size 230 x 115 x 75 mm laid across in trenches for cable protection complete all as specified and directed.

M&L for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar 1:1 Complete all as specified and directed.

M&L for SWG drain pipe grade 'A' of 200 mm internal dia laid in trenches and jointed in cement mortar 1:1 Complete all as specified and directed.

M&L for concrete bed to drain pipes 150mm dia using cement concrete 1:3:6 type C2 including packing under and haunching against the sides of pipes after they are laid and tested in Complete all as specified and directed.

M&L for concrete bed to drain pipes 200mm dia using cement concrete 1:3:6 type C2 including packing under and haunching against the sides of pipes after they are laid and tested in Complete all as specified and directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) all as specified and directed. Note:- Reinforcement will be measured and paid seperately

Construction of RCC Septic tank With Upflow Filter designed to carry sewage and sullage water, excavation in any type ofdesigned to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users all as specified.complete all as shown on TD Drg No-CETS/ST/796 Sheet 1/1 dated 01 Jan 2018.

Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.6 M dia X 4.5 M effective depth all as specified.complete all as shown on TD Drg No-CETS/ST/784 Sheet 1/1 dated 14 Feb 2017.

saradhi construction combines (BID ID -3509158)

BHAGYARAM ENTERPRISES (BID ID -3509422)

SAI RUPA CONSTRUCTIONS (BID ID -3506484)

harshraj and co (BID ID -3508408)

K CHANDRAPAL REDDY (BID ID -3504723)

POWER CONSTRUCTION COMPANY (BID ID -3509359)

A SOMA RAJU (BID ID -3509701)

Sri Associates (BID ID -3508935)

PAVAN ENTERPRISES (BID ID -3508647)