WBPHED/AE/BMSD/NIeT- 6 OF 2024-2025/11

Amount

Supply delivery at site of 650/1100 Volts Power Cables with Aluminium Conductor XLPE Insulated, Cores Laid Up, Thermoplastic Tape Inner Sheathed, Al. Armoured and Extruded PVC .Type ST2 Outer Sheathed As Per IS-7098 (Part 1) 2011 , 10 sq mm, 3 core

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying the above 10mm2 3 core PVC/ XLPE insulated aluminium Armored cable on existing water supply pipe collecting line made by our civil counter part with proper laying of cable and binding it with suitable size GI wire from T/W to the riverbed P/H complete as per IE rule as per direction of the EIC.

Making necessary cable joint by testing the cable by multimeter and meger by proper elecctrician with the supply of High Voltage Tape ( 1.9 cm x 66 feet, 1 nos) , Self Adhesive Rubber Electrical Insulation Tape ( 19mm x 10 mtr each 2 nos ) for Communication Cable Joints approx 25 nos joint and refilling the earth and sand as required to complete the work.

Withdrawing of defective submersible pump motor set from river bed tube well after disconnecting of all the electrical and hydraulic connections as per direction of EIC.

Dismantlinng of sebmersible pump motr set by expert person for necessary checking.

Washing cleaning of the pump parts like stud nuts, coupling, shaft, impeller, bush, sleeve, rings sequentially then fitting fixing with supplying stud nuts, sleeve rings as per direction of EIC.

Lowering of repaired submersible pump motor set from river bed tube well after disconnecting of all the electrical and hydraulic connections as per direction of EIC

Add: 18% GST

Add: 1% Cess

ABHIJIT MUKHERJEE (BID ID -5702529)

M/S NABIN GOPAL SENGUPTA (BID ID -5702484)