Renovation of existing Mangrove Forest Rest House under Baratang Forest Division

Amount

Removing white or colour wash by scrapping and sand preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Grinding of wood and finishing by angle grinder using 125mm sand paper of grit size 80 and hand paper of grit size 120.

French spirit polishing

Two or more coats on new works including a coat of wood fille

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

12 mm cement plaster

1:4 (1 cement : 4 coarse sand)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing

Rectangular shape 453x357 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - 100 nn dia

Sand cast iron S& S waste and vent pipe

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

100 mm diameter

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

Providng and fixing wall mixture for hot and cold water of approved quality.

Providing and fixing 5ltr capacity geyser of approved quality.

Providing and fixing health faucet of approved quality

12 mm cement plaster finished with a floating coat of neat cement of mix

1:4 (1 cement:4 fine sand)

Providing and fixing modern/ western floor mounted white vitreous china with attached cistern 5 trap including flush pipe, with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fistures inlcuding an dmakein good the wall and floors wherever required.

Removal of Tiles for wall and floor all complete as per direction of Engineer-In-Charge

Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm includingpointing the joints with white cement and matching pigment etc.,complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)

Second class teak wood

Panelling with 12mm plywood on wooden frame on walls including all fittings complete as per direction of Engineer-In-Charge

Providing and fixing tempered 6mm thickness glass on wooden frame all complete as per direction of Engineer-In-Charge

Applying priming coat

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coat on new work

Providing and fixing internal electrical installation for 05 Room including reception, Dinning space, Kitchen with corridoor with required fitting (square light, fan, exhaust fan, mirror light,) and fixture of approved brand and manufacture with providing of Air Conditioner 1.5Ton 05 Nos and 2 Ton 02 Nos all works complete as per specification and direction of Engineer-in-charge

Providing and fixing of CPVC Brass Elbow 3/4" x1/2" approved good quality and complete the works

Providing and fixing of Brass Tee 3/4" x1/2" approved good quality

Providing and fixing of CPVC Pipe 3/4 of 5mtr length of approved good

Providing and fixing of CPVC Elbow 3/4" approved good quality

Providing and fixing CPVC Tee 3/4" of approved good quality.

Providing and fixing Reducer Tee 1x 3/4" approved good quality and complete the works

Providing and fixing PVC Connector Pipe (60 cm) lenght approved good quality.

Providing and fixing CP Angular Cock approved good quality

Providing and fixing CP pillar cock of approved quality

Providing and fixing Tissue paper stand pillar cock of approved quality

Providing and fixing Hand Shower set of approved quality

Providing and fixing CPVC Plain FTA 1 X 1" approved good quality and complete the works

Providing and fixing of CPVC Pipe 1 " for 5mt length approved good quality.

Providing and fixing of CPVC Pipe 2 "for approved good quality.

Providing and fixing syntex nipple 2" approved good quality and complete the works

Providing and fixing CPVC Plain FTA 2" approved good quality.

Providing and fixing 2" CPVC union socket of approved good quality.

Providing and fixing 2" CPVC bend of approved good quality

Providing and fixing 20mm CPVC Tee of approved good quality.

Providing of CPVC Reducer 2 x 1" approved good quality

Providing and fixing Brass Ball Valve 2" approved good quality and complete the works

CPVC Brass MTA 1" approved good quality and complete the works

Providing and fixing 1.5 feet acrylic shelf with edges round off supported on anodised aluminum angle frame and gurad rail complete fixed with 40mmlong screws rawl plugs etc. complete.

Providing and fixing CPVC Tee 1" x1"approved good quality and complete the works

Providing and fixing of CPVC Elbow 1"x1" approved good quality

Providing and fixing of CPVC Foot Valve 1 1/2" approved good quality and complete the works

Providing and fixing Kitchen Sink Cock (wall mount) approved good quality and complete the works

Providing and fixing CPVC Solvent resistance from corrosion of approved quaity(200ml)

Providng Thread Seal tape good quality with good tightness

Providing and fixing C. P. Jally 4" made from stainless steel of approved quality

Providing and placing on terrace (at all floor levels) 500 litres capacity marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Insallation of1 Hp Pump with all acessories

Providing of S.S.Clamp 2"

Providing of S.S.Screws

KUMARESH MONDAL (BID ID -49685)