A/R and M/o Non residential building under CD, APWD, Diglipur during the year 2022-23

Amount

Solvent

Paving Asphalt VG 10 of approved quality

Polyvinyl chloride sheet 400 micron thick

Stone ware spouts 100 mm dia 60 cm long

Galvanised steel corrugated sheets

Aluminium troughed profile sheet 0.56mm thick with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm)

Aluminium troughed profile sheet 0.71mm thick with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm

Aluminium troughed profile sheet 0.91mm thick with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm

Aluminium profile sheet 0.56mm thick with center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050mm

Aluminium profile sheet 0.71mm thick with center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050mm

Aluminium profile sheet 0.91mm thick with center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050mm

Aluminium Circular(sinusoidal) profile sheet 0.56mm thick with center to center pitch of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm

Aluminium Circular(sinusoidal) profile sheet 0.71mm thick with center to center pitch of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm

Aluminium Circular(sinusoidal) profile sheet 0.91mm thick with center to center pitch of 75 mm, depth of 19 mm, overall profile width 1250mm, cover width 1150mm

Precoated Aluminium troughed profile sheet 0.56mm thcik with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm

Precoated Aluminium troughed profile sheet 0.71mm thick with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm

Precoated Aluminium troughed profile sheet 0.91mm thick with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm

Aluminium color coated profile sheet 0.56mm thick with center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050mm

Aluminium color coated profile sheet 0.71mm thick with center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050mm

Aluminium color coated profile sheet 0.91mm thick ith center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050mm

Aluminium profile sheet 0.56mm thick with center to center pitch of 177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

Aluminium profile sheet 0.71mm thick with center to center pitch of 177.5 mm, depth of 28.5 mm, 987mm overall profile width, cover width 900mm

Precoated/Mill finish Aluminium plain ridges 0.71 mm TCT/plain and 500- 600 mm wide

Precoated/Mill finish Aluminium flashings/aprons 0.50mm TCT/plain and wide upto 600 mm

Precoated/Mill finish Aluminium plain north light cuves

Precoated/mill finish aluminium Barge board (Upto 200 mm)

Precoated/Mill finish Aluminium crimp curve

Precoated/Mill finish Aluminium gutter

Stainless steel self tapping screw of 6x50mm with SS hex cap and 3mm thick EPDM seal

EPDM washer

Stainless steel bolts & nuts 10 mm dia and 125 mm long round head with slots

Gunmetal non-return valve - vertical (screwed end) 25 mm dia

Gunmetal non-return valve - vertical (screwed end) 32 mm dia

Gunmetal non-return valve - vertical (screwed end) 40 mm dia

Gunmetal non-return valve - vertical (screwed end) 50 mm dia

Gunmetal non-return valve - vertical (screwed end) 65 mm dia

Vitreous china Surgeon type wash basin of size 660x460 mm

600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size

Vitreous china flat back wash basin 550x400 mm

Gunmetal non-return valve - vertical (screwed end) 80 mm dia

C.I. sluice valve (with caps) class II : 100 mm dia

C.I. sluice valve (with caps) class II : 125 mm dia

C.I. sluice valve (with caps) class II : 150 mm dia

C.I. sluice valve (with caps) class II : 200 mm dia

C.I. sluice valve (with caps) class II : 250 mm dia

C.I. sluice valve (with caps) class II : 300 mm dia

15 mm Battery Based Sensor Pillar Cock

C.P. Brass union 40mm dia

C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long: 100 mm dia

C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long: 75 mm dia

S.C.I. S&S bends with access door 100 mm dia

S.C.I. S&S bends with access door 75 mm dia

S.C.I. S&S bend 100 mm dia

S.C.I. S&S bend 75 mm dia

S.C.I. S&S heel rest sanitary bend 100 mm dia

S.C.I. S&S heel rest sanitary bend 75 mm dia

S.C.I. S&S single equal junctions 100x100x100 mm

S.C.I. S&S single equal junctions 75x75x75 mm

S.C.I. S&S single equal junctions with access door 100x100x 100 mm

S.C.I. S&S single equal junctions with access door 75x75x75 mm

S.C.I. S&S double equal junctions 100x100x100x100 mm

S.C.I. S&S double equal junctions 75x75x75x75 mm

S.C.I. S&S double equal junctions with access door 100x100x100x 100 mm

S.C.I. S&S double equal junctions with access door 75x75x75x75 mm

S.C.I. S&S single unequal junctions 100x100x75 mm

S.C.I. S&S single unequal junctions with access door 100x100x75 mm

S.C.I. S&S double unequal junctions 100x100x75x75 mm

S.C.I. S&S double unequal junctions with access door 100x100x75x 75 mm

S.C.I. S&S single equal invert branch of required degree 100x100x 100 mm dia

S.C.I. S&S single equal invert branch of required degree 75x75x 75 mm dia

S.C.I. S&S double equal invert branch of required degree 100x100x100x 100 mm dia

S.C.I. S&S double equal invert branch of required degree 75x75x75x 75 mm dia

S.C.I. S&S single unequal invert branch of required degree 100x100x 75 mm dia

S.C.I. S&S double unequal invert branch of required degree 100x100x 75x75 mm dia

S.C.I. S&S, 75 mm offset for 75 mm dia pipe

S.C.I. S&S, 150 mm offset for 75 mm dia pipe

S.C.I. S&S, 150 mm offset for 100 mm dia pipe

S.C.I. S&S, 114 mm offset for 75 mm dia pipe

S.C.I. S&S, 114 mm offset for 100 mm dia pipe

S.C.I. S&S, 152 mm offset for 75 mm dia pipe

S.C.I. S&S, 152 mm offset for 100 mm dia pipe

S.C.I. S&S door pieces 100 mm dia

S.C.I. S&S door pieces 75 mm dia

S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm

S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm

S.C.I. S&S, collars 100 mm

S.C.I. S&S, collars 75 mm

S.C.I. S&S, 75 mm offset for 75 mm dia pipe

S.C.I. S&S, 75 mm offset for 100 mm dia pipe

Vitreous china toilet paper holder of standard size

560 mm dia cover with frame (Heavy duty)

560 mm dia cover without frame (Heavy duty)

SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-10312 standard 15 mm outer dia

SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-10312 standard 22 mm outer dia

SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-10312 standard 28 mm outer dia

SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-10312 standard 35 mm outer dia

SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-10312 standard 42 mm outer dia

SS pipe 316L grade as per IS 6911:2017 with press fit technology and conforming to EN-10312 standard 54 mm outer dia

Coupling/Socket fittings for 15 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Coupling/Socket fittings for 22 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Coupling/Socket fittings for 28 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Coupling/Socket fittings for 35 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Coupling/Socket fittings for 42 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Coupling/Socket fittings for 54 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 22 mm X 15 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 28 mm X 15 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 28 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 35 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 35 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 42 mm X 22 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 42 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 42 mm X 35 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 54 mm X 28 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 54 mm X 35 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducer for 54 mm X 42 mm outer Dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Sleeve/Slip Coupling / Socket 15 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Sleeve/Slip Coupling / Socket 22 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Sleeve/Slip Coupling / Socket 28 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Sleeve/Slip Coupling / Socket 35 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Sleeve/Slip Coupling / Socket 42 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Sleeve/Slip Coupling / Socket 54 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Elbow 90° for 15 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Elbow 90° for 22 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Elbow 90° for 28 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Elbow 90° for 35 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Elbow 90° for 42 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Elbow 90° for 54 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Equal Tee for 15 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Equal Tee for 22 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Equal Tee for 28 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Equal Tee for 35 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Equal Tee for 42 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Equal Tee for 54 mm outer dia SS pipe of grade 316L as per IS 6911: 2017 and conforming to EN-10312 standard

Reducing Tee for 22 mm X 15 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 28 mm X 15 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 28 mm X 22 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 35 mm X 15 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 35 mm X 22 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 35 mm X 28 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 42 mm X 22 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 42 mm X 28 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 42 mm X 35 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 54 mm X 22 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 54 mm X 28 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 54 mm X 35 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Reducing Tee for 54 mm X 42 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 22 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 28 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 28 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 35 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 35 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 42 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 54 mm outer dia X 1-1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female thread Tee for 54 mm outer dia X 2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female threaded Connector/Adapter for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female threaded Connector/Adapter for 22 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female threaded Connector/Adapter for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female threaded Connector/Adapter for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female threaded Connector/Adapter for 35 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female threaded Connector/Adapter for 42 mm outer dia X 1-1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Female threaded Connector/Adapter for 54 mm outer dia X 2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Male threaded Connector/ Adapter for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Male threaded Connector/ Adapter for 22 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Male threaded Connector/ Adapter for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Male threaded Connector/ Adapter for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Male threaded Connector/ Adapter for 35 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Male threaded Connector/ Adapter for 42 mm outer dia X 1-1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Male threaded Connector/ Adapter for 54 mm outer dia X 2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard Female Threaded Elbow 90°

SS Female Threaded Elbow 90° for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Threaded Elbow 90° for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Threaded Elbow 90° for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Threaded Elbow 90° for 35 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Threaded Elbow 90° for 42 mm outer dia X 1-1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Threaded Elbow 90° for 54 mm outer dia X 2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Threaded Elbow 90° for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Threaded Elbow 90° for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Threaded Elbow 90° for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Threaded Elbow 90° for 35 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Threaded Elbow 90° for 42 mm outer dia X 1-1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Threaded Elbow 90° for 54 mm outer dia X 2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Cap for 15 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Cap for 22 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Cap for 28 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Cap for 35 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Cap for 42 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Cap for 54 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Pipe Bridge for 15 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Pipe Bridge for 22 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Stainless steel Pipe Bridge for 28 mm outer dia pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Union for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Union for 22 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Union for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Union for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Union for 35 mm outer dia X 1-1/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Union for 42 mm outer dia X 1-1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Male Union for 54 mm outer dia X 2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Union for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Union for 28 mm outer dia X 1" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Transition Elbow/ FTE for 15 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Transition Elbow/ FTE for 22 mm outer dia X 1/2" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

SS Female Transition Elbow/ FTE for 22 mm outer dia X 3/4" nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for small series casement window/door frame, sash, mullion & small series sliding window frame

Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series casement window/door frame, sash, mullion, big & small series sliding window frame

Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series casement door sash

Galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series sliding window / door sash

Stainless steel (Grade-304)hollow section round/square tubes

Stainless steel bolts/square bar and plates

Pressed steel door frames (mild steel sheet 1.60 mm) Profile "B"

Pressed steel door frames (mild steel sheet 1.60 mm) Profile "C"

Pressed steel door frames (mild steel sheet 1.60 mm) Profile "E"

Mild steel tubes hot finished welded type

Mild steel tubes hot finished seamless type

Mild steel tubes electric resistant or induction butt welded

Circular C.I. Box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick MS sheet

Pulley 40 mm dia

Aluminium primer

Red oxide Zinc chromate primer

Copper acetate

Hydrochloric acid

Copper chloride

Copper nitrate

Ammonium chloride

Mobil oil

EPS blocks

GI woven mesh of aperture 5.45 mm (with wire of dia 0.90 mm)

SR adhesive for joining EPS blocks

Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 45 x 70 mm

Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 45 x 85 mm

Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 50 x 100 mm

Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 50 x 125 mm

Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 65 x 100 mm

Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 65 x 125 mm

Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 65 x 150 mm

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 30mm thick

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 35 mm thick

Factory made single extruded WPC (Wood Polymer Composite) solid plain white colored board of 18 mm thick

Factory made single extruded WPC (Wood Polymer Composite) solid plain white colored board of 25 mm thick

Factory made single extruded WPC (Wood Polymer Composite) solid plain white colored board of 6 mm thick

Factory made single extruded WPC (Wood Polymer Composite) solid plain white colored board of 12 mm thick

Factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali

PVC laminated foil of minimum thickness of 14 microns of approved design

16mm thick extruded terracotta tiles of grey colour of size 300 x 595mm

16mm thick extruded terracotta tiles of other than grey colour of size 300 x 595mm

24mm thick extruded terracotta tiles of grey color of size 309x1190 mm and length 1190mm

24mm thick extruded terracotta tiles of grey color of size 309x1190 mm and length 1190mm

Melamine wood sealer

Melamine solvent/thinner

Sanding cloth 150 mm wide

Sandpapers of assorted gratings

Melamine wood filler putty

Dhoti (worm out soft cotton cloth)

Grease

Shutttering oil

GP-2 cementeous compound

Galavinised MS L-shape level adjuster of size 76x25x25x1.6 mm

12x50 mm long dash fastener

Galvanized MS Z Cleat of size 25 x 37 x 25 x 1.6 mm with precut hole on both 25 mm flange

15mm tegular/butt edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles of size 595x595 mm

Grinding buffers

4mm thick sheet of aluminium alloy grade 6061 (type-6) for aluminuum formwork

Fabrication cost for formwork panels and special including computerised designing for fabrication and mock testing before transportation to site of work.

Packaging and carting of aluminium sheet/plate to the site of work

MS working platform for aluminium formwork

White marble slab Makrana second quality plain veined 18 mm thick

Pink marble slab plain 18 mm thick

Udaypur green marble slab plain 18 mm thick

Black Zebra marble slab plain 18 mm thick

Sand zone V (Jamuna)

Brass 100mm mortice latch and lock with 6 levers without pair of handles

Pair of Anodised Aluminium lever handles for 100 mm mortice latch and lock

Vitreous china flat back wash basin 450x300 mm

Vitreous china 10 litres low level cistern without fittings

Vitreous china 10 litres low level cistern with fittings

F.P.S. (non modular) clay fly ash bricks class designation 7.5

12.5 mm thick tapered edge plain gypsum plaster borad confirming to IS 2095 (Part 1):2011

Galvanised Steel ceiling section (size 80x26x0.50 mm)

Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm)

Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm)

Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm)

Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire)

Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm)

Joint filler

Joint finisher

Joint tape roll

Dash fastener / Chemical fastener

All drive screws (for gypsum board)

Primer (for gypsum board)

Chlorpyriphos 20% E.C. / Lindane 20% E.C.

Chromium plated brackets (curtain rods)

Acid Proof cement

Self tapping pan head nickel coated mild steel screws of size 13 x 3.2 mm

Fibre joint tape 50 mm wide (90 metre) roll

12.5 mm thick Fully Perforated gypsum board

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm

12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to IS 2095 (Part 1):2011

Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm)

Nickel plated M.S. pipe 25 mm dia

Nickel plated M.S. pipe 20 mm dia

Nickel plated M.S. Brackets for curtain rod 20 mm

Nickel plated M.S - Brackets for curtain rod 25 mm

Oxidised mild steel screws 35 mm

Rolling shutters of 80x0.90 mm laths

Rolling shutters of 80x1.2 mm laths

Top cover of Rolling shutters 0.90 mm thick

Top cover of Rolling shutters 1.20 mm thick

Rawl plug 50 mm (designation 10 nos)

Teak wood lipping of size 25x3 mm in pelmets

PU Primer

40 mm (average) PU spray having 40-45 kg/m3 density

GI wire netting 3/4" x 24 G

400 G polythene sheet

Flat pressed 3 layer and graded particle board (medium density) Grade 1 conforming to IS : 3087 - 18 mm thick

Aluminium tee channel (heavy duty) with rollers and stop end

Aluminium hanging floor door stopper with twin rubber & stopper

Hydraulic door closer tubular type Aluminium section body

Oxidised M.S.casement stay (straight peg type) 300 mm not less than 0.33 kg

Oxidised M.S.casement stay (straight peg type) 250 mm not less than 0.28 kg

Oxidised M.S. casement stay (straight peg type) 200 mm not less than 0.24 kg

Extra for providing grilled rolling shutters with 8 mm dia M.S. rod

Chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm - Light shade using white cement

White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area

Wall mounted water closet of size 780 x 370x690 mm

Adjustable Vitreous China Cistern with fittings of flushing capacity 3 litre/ 6litre (adjustable to 4 litre/ 8 litre)

White Vetrious China Waterless Urinal of size 600x330x315 mm

Cistern with fittings for Waterless Urinal

Battery based infrared sensor operated white Vitreous Urinal of aprox. size 610x390x370 mm

Acid and alkali resistant tiles 300x300 mm size, 10 mm thick

S.C.I. Tee 150 mm

Expanded polystyrene type N- Normal 50 mm thick

Expanded polystyrene type - SE 50 mm thick

Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 250 mm

Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 225 mm

Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm

Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 178 mm

Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm

Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Coloured Orissa pattern W.C. pan 580x440 mm

Coloured Pedestal type W.C. pan 580x440 mm (European type)

Coloured Vitreous china 10 lit. low level cistern

Coloured (other than black) solid P.V.C. seat in European W.C. pan

Circular shape 450 mm dia Mirror with Plastic moulded frame

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Oval shape 450x350 mm (outer dimensions) Mirror with Plastic moulded frame

Rectangular shape 1500x450 mm Mirror with Plastic moulded frame

Hard board 6 mm thick

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings

Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings

Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings

Bottle Trap

CP Brass Single lever telephonic wall mixer of approved make

Coloured High density polyethylene / poly propylene 10 lit. (full flush) capacity controlled low level flushing cistern with fittings

White Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings

Coloured Vitreous china 10 litre (full flush) capacity controlled low level flushing cistern with all fittings

S.W. intercepting trap 100 mm dia

S.W. intercepting trap 150 mm dia

Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5

Square shape 450x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5

Circular shape 450 mm dia precast R.C.C. manhole cover with frame - L.D. - 2.5

Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10

Circular shape 500 mm dia precast R.C.C. manhole cover with frame- M.D.-10

Circular shape 560 mm dia precast R.C.C. manhole cover with frame - H.D. - 20

Circular shape 560 mm dia precast R.C.C. manhole cover with frame - E.H.D. - 35

Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick plain type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848

Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick both sides prelaminated type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848

Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick one side prelaminated type-I, and other side balancing lamination, medium density flat pressed three layer, graded particle board (FPT- I) as per IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848

Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass panes

Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm

Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm

Laminated veneer lumber confirming to TADS 15:1995 manufactured in factory in frames of doors, windows

C.I. pile shoe

M.S. clamps for pile shoe of 35 kg per pile

Bentonite of 35 kg per pile

Oxidised M.S. safety chain (weighing not less than 450 gms) for door

C.I. grating 150 mm dia, weighing not less than 440 gm

U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia

U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia

U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 75 mm dia

U-PVC pipes (working pressure 4 kg / cm²) Rubber (Seal) Ring 110 mm dia

uPVC coupler for UPVC drainage pipes 75 mm

uPVC coupler for UPVC drainage pipes 110 mm

uPVC pushfit coupler (single) 75 mm thick

uPVC pushfit coupler (single) 110 mm thick

uPVC single equal Tee (without door) 75x75x75 mm

uPVC single equal Tee (without door) 110x110x110 mm

uPVC single equal Tee (with door) 75x75x75 mm

uPVC single equal Tee (with door) 110x110x110 mm

UPVC bend 87.5° 75 mm bend

UPVC bend 87.5° 110 mm bend

UPVC plain shoe 75 mm

UPVC plain shoe 110 mm

UPVC pipe clip 75 mm

UPVC pipe clip 110 mm

Self-Drilling/Self-Tapping Screws M-6 25mm long

SS anchor Fasteners (RCC / Brick) - M-8x75mm/M-10x100mm

MS Polymer Sealant Adhesive

SS Double Clip at intermediate

SS Single clip at top and bottom

Self-Drilling/Self-Tapping Screws 5.5x25 mm long

SS Anchor Fasteners (RCC / Brick) - M-8x100 mm

Concrete hardener

Release agent

Sealer

PU resin top coat

Resin Bonded Glass wool 16 kg/m³ : 50 mm thick

Resin Bonded Glass wool 24 kg/m³ : 50 mm thick

Fibre glass tissue reinforcement Type II Grade i

Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement

Precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement

High Albedo paint

Epoxy paint

Fire retardant paint

Melamine polish

Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18 mm thick

Table rubbed polished stone 18mm thick (75x50cm) Granite stone- 18 mm thick

Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification and up to 50 tonne capacity pile

Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & above 50 tonne and up to 100 tonne

Vertical load testing (initial) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & group of two or more up to 50 tonne

Cyclic vertical load testing of piles in accordance with IS : 2911 (Part- IV) including preparation of pile head etc. for Single pile up to 50 tonne capacity

Cyclic vertical load testing of piles in accordance with IS : 2911 (Part- IV) including preparation of pile head etc. for Single pile above 50 tonne capacity pile and up to 100 tonne capacity pile

Cyclic vertical load testing of piles in accordance with IS : 2911 (Part- IV) including preparation of pile head etc. for Group of two piles up to 50 tonne capacity each

Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe allowable lateral load on pile up to 50 tonne capacity

Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe allowable lateral load on pile above 50 tonne capacity

Hardening compound

Road marking paint (spirit based)

Superior quality road marking paint (water based)

C.P. Brass bibcock 15 mm

C.P. Brass long nose bibcock 15 mm

C.P. Brass long body bibcock 15 mm

C.P. Brass stop cock (concealed) 15 mm

C.P. Brass angle valve 15 mm

Pressed clay tiles 20mm thick 250x250 mm size

25 mm thick particle board

25 mm thick melamine faced prelaminated three layer particle board

Resin Bonded Rockwool 48 kg/m3

Glass wool 50 mm thick

Waste plastic additive

Granite of colour black, cherry/ruby red 18 mm thick (slab area upto 0.50 sqm)

Granite of colour black, cherry/ruby red 30 mm thick (slab area upto 0.50 sqm)

Granite of all colour except black, cherry/ruby red 18 mm thick (slab area upto 0.50 sqm)

Granite of colour black, cherry/ruby red 18 mm thick (slab area above 0.50 sqm)

Granite stone slab all colour except black, cherry/ruby red 18 mm thick (slab area above 0.50 sqm)

Granite of all colour except black, cherry/ruby red 30 mm thick (slab area above 0.50 sqm)

Aluminium T or L sections

For flush door shutters Extra for providing teak veneering on one side instead of commercial veneering

Paving Asphalt of grade VG-30 of approved quality

Expandable fastener with plastic sleeve and M.S. screws : 25 mm long

Expandable fastener with plastic sleeve and M.S. screws : 32 mm long

Expandable fastener with plastic sleeve and M.S. screws : 40 mm long

Expandable fastener with plastic sleeve and M.S. screws. 50 mm long

Plasticizer / super plasticizer

Wall form panel 1250x500 mm

Tie bolt 12 mm dia 100 mm length

Tie bolt 12 mm dia 150 mm length

Tie bolt 20 mm dia 150 mm length

Tie bolt 20 mm dia 225 mm length

Spring coil 12 mm

Plastic cone 12 mm dia

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. tube 40 mm dia

Wall form panel 1250x450 mm

Corner angle 45x45x5 mm 2.50 m long

Column clamp 450x1070 mm

Prop 2 m ( 2-3.5 m)

Lock Bar (E 250) - 10 thick MS Plate

Gun metal cramp

Stainless steel cramp

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75 m)

Beam clamp 300-380 mm (450-1070 mm)

Prop 4 m

Double coupler

Cadmium plated full threaded steel screws (30x4 mm dia)

Aluminium washer 2 mm thick 15 mm dia

12 mm M.S. 'U' beading

Plastic encapsulated M.S. foot rest 30x20x15 cm

Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe)

P.V.C. automatic flushing cistern 5 litre capacity

P.V.C. automatic flushing cistern 10 litre capacity

15 mm C.P. brass tap with elbow operation lever

White glazed fire clay draining board 600x450x25 mm

Glass reinforced Gypsum ( GRG) plaster board 12.5 mm thick confirming to IS 2095 (Part 3):1996

Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm

GFRG Panel of 124 mm thick

Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm

G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal

G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two lipped urinals

G.i. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three lipped urinals

G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four lipped urinals

White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS:2556

Precast R.C.C. grating with frame 500x450 mm horizontal grating

Precast R.C.C. grating with frame 450x100 mm vertical grating

Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887

12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener

Spigot for standard jointing

Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt

Anodising 15 microns on aluminium sections

EPDM Gasket for uPVC window/door

Anodising 25 microns on aluminium sections

Powder coating 50 microns on aluminium sections

Polyester powder coating 50 microns on aluminium sections

Double action hydraulic floor spring with stainless steel cover plate

6 mm dia G.I. adjustable hangers including clips (up to 1.2 m length)

Double action hydraulic floor spring with brass cover plate

Base Jack

Challies

Cup locks

15 mm PTMT bib cock

15 mm PTMT bib cock with flange (fancy)

15 mm PTMT bib cock long body with flange

15 mm dia PTMT stop cock (male thread)

20 mm dia PTMT stop cock

PTMT pillar cock

PTMT push cock 15 mm dia

PTMT push cock 12 mm dia 20 mm BSP

PTMT grating 100 mm dia

PTMT Pillar cock (fancy) 15 mm foam flow

125 mm grating with waste hole

Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia (110 gm)

Double acting air valve 50 mm

Double acting air valve 80 mm

Double acting air valve 100 mm

Water meter (including testing charges) 80 mm

Water meter (including testing charges) 100 mm

Water meter (including testing charges) 150 mm

Wedge expansion hold fastener 3/8" or 10 mm

Wedge expansion hold fastener 1/2" or 12 mm

8mm thick (mirror polished tiles machine cut edge) Raj Nagar white

Wheel 75 mm dia. 40 mm wide

Aluminium single cleat of size 30x32x3 mm

Aluminium grip strip of size 50x12x2 mm

25 mm thick prelaminated flush door shutter both side decorative

Aluminium U beading

Glass sheet (Pin headed) 4 mm thick

Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab area upto 0.50 sqm)

Raj nagar plain white marble (table rubbed and polished) 18 mm thick (slab area more than 0.50 sqm)

Veneered particle board with commercial veneering on both sides 12 mm thick

Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade i, Type II conforming to IS : 12823 (exterior grade) 12 mm thick

Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 18 mm thick

Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 25 mm thick

Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick

Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width)

Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width)

PTMT - Waste Coupling 31/32 mm

PTMT - Waste Coupling 38/40 mm

PTMT - Bottle Trap 31/32 mm

PTMT - Bottle Trap 38/40 mm

PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 40mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 50mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Angle Stop cock with Flange 15 mm

PTMT Swiveling shower 15 mm

PTMT Liquid Soap Container of 400 ml capacity

PTMT - Towel Ring 215x200x37 mm

PTMT - Towel Rail (450 mm long )

PTMT - Towel Rail (600 mm long)

PTMT Shelf 450x124x36 mm

PTMT - Urinal Spreader 15 mm

PTMT Soap Dish/Holder 138x102x75 mm

PTMT handle 125x34x24 mm

PTMT handle 150x34x24 mm

PTMT butt hinges 75x60x10 mm

PTMT butt hinges 100x75x10 mm

PTMT Tower bolt 152x42x18 mm

PTMT Tower bolt 202x42x18 mm

PTMT door catcher 72x42 mm

Coir veneered board 4 mm thick

Coir veneered board 6 mm thick

Coir veneered board 12 mm thick

Coir veneered board 18 mm thick

Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 100 mm dia (3000 mm length pipe)

Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 75 mm dia (3000 mm length pipe)

Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 100mm dia

Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 75 mm dia

Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 - 100x100x100x100 mm dia

Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 - 75x75x75x75 mm dia

Hubless centrifugally cast (spun) iron single equal plain junction as per IS 15905 - 100x100x100 mm dia

Hubless centrifugally cast (spun) iron single equal plain junction as per IS 15905 - 75x75x75 mm dia

Hubless centrifugally cast (spun) iron double unequal plain junction as per IS 15905 - 100x100x75x75 mm dia

Hubless centrifugally cast (spun) iron single unequal plain junction as per IS 15905 -100x100x75 mm dia

Hubless centrifugally cast (spun) iron double equal plain invert branch as per IS 15905 - 100x100x100x100 mm dia

Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 - 100x100x100 mm dia

Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 - 75x75x75 mm dia

Hubless centrifugally cast (spun) iron single unequal plain invert branch 45 degree as per IS 15905 - 100x100x75 mm dia

Hubless centrifugally cast (spun) iron 65 mm offset with 100 mm dia pipe as per IS 15905

Hubless centrifugally cast (spun) iron 65 mm offset with 75 mm dia pipe as per IS 15905

Hubless centrifugally cast (spun) iron 130 mm offset with 100 mm dia pipe as per IS 15905

Hubless centrifugally cast (spun) iron 130 mm offset with 75 mm dia pipe as per IS 15905

Hubless centrifugally cast (spun) iron bend with access door - 100mm dia as per IS 15905

Hubless centrifugally cast (spun) iron bend with access door - 75mm dia as per IS 15905

Hubless centrifugally cast (spun) iron terminal guard (slotted cowl) - 100 mm dia as per IS 15905

Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 100 mm outlet as per IS 15905

Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 75 mm outlet as per IS 15905

SS 304 grade shielded coupling with EPDM rubber gasket for 100mm dia Hubless centrifugally cast (spun) iron

SS 304 grade shielded coupling with EPDM rubber gasket for 75 mm dia Hubless centrifugally cast (spun) iron

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 150 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 200 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250 mm dia

Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 300 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350 mm dia

Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 400 mm dia

Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 450 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500 mm dia

Ductile Iron class K -9 pipe Conforming to I.S. 8329 - 600 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900 mm dia

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900 mm dia

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000 mm dia

Ductile Iron K - 12 specials suitable for push on jointing up to 600 mm dia

Ductile Iron K - 12 specials suitable for push on jointing over 600 mm dia

Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 - up to 600 mm dia

Ductile Iron Specials suitable for mechanical jointing as per I.S. 9523 over 600 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 100 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 150 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 200 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 250 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 300 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 350 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 400 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 450 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 500 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 600 mm dia

Ductile Iron Pipe Class K-9 flanges and welding 700 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 100 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 125 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 150 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 200 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 250 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 300 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 350 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 400 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 450 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 500 mm dia

S&S Centrifugally (Spun) C.I. Pipe class LA 600 mm dia

S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing up to 300 mm dia

S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing over 300 mm dia

S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300 mm dia

S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint as per I.S. 13382 over 300 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 100 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 150 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 200 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 250 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 300 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 350 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 400 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 450 mm dia

Screwed double flanged centrifugally cast (spun) C./. Pipe of Class B conforming to I.S. 1536, - 500 mm dia

Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 600 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250 mm dia

Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 300 mm dia

Ductile Iron Class K- 7 pipe conforming to i.S. 8329 - 350 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900 mm dia

Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000 mm dia

Extruded burnt flyash clay sewer bricks conforming to I.S 4885

Fly ash bricks conforming to I.S. 12894

Calcium Silicate Bricks machine moulded conforming to I.S. 4139

Modified Bitumen Refinery produced CRMB - 55

Modified Bitumen Refinery produced CRMB - 60

Bitumen emulsion medium setting (M.S.) conforming to IS : 8887

M.S. pipe 150 mm dia casing pipe

M.S. pipe 200 mm dia casing pipe

PVC blind pipe 150 mm dia as per IS: 12818

PVC blind pipe 200 mm dia as per IS: 12818

M.S. cap 150 mm dia

M.S. cap 200 mm dia

M.S bail plug 150 mm dia

M.S bail plug 200 mm dia

PVC slotted pipe 150 mm dia as per IS: 12818

PVC slotted pipe 200 mm dia as per IS: 12818

Stone Boulder 50 mm to 200 mm

Gravel 5 mm to 10 mm

Gravel 1.5 mm to 2 mm

M.S. pipe 100 mm dia casing pipe

uPVC blind pipe 100 mm dia as per IS: 12818

uPVC slotted pipe 100 mm dia as per IS: 12818

M.S. cap 100 mm dia

M.S. bail plug 100 mm dia

Precast R.C.C. perforated slab

Water supply tanker of 5000 litre capacity

M.S. socket 100 mm dia

M.S. socket 150 mm dia

M.S. socket 200 mm dia

Stone cleaning chemical approved by ASI

Water repallent chemical approved by ASI

Stone surface strengthening chemical approved by ASI

Turpentine oil

Liquid Ammonia 5%

Pea Gravel

Coloured inter locking C.C. paver Block (60 mm thick, M-35)

Stone size 10x10x7.50cm

Sodium pentachlorophenate

Concrete paver block of grade M-30 made of C&D waste (60mm thickness)

Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades and designs except burgundy, bottle green, black

Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades designs except White, Ivory, Grey, Fume Red Brown etc.

Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades designs White, Ivory, Grey, Fume Red Brown etc.

Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more in all shades designs except White, Ivory, Grey, Fume Red Brown etc.

Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X 578 mm

Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355 mm

Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345 mm

Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet

Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet

Agaria White marble slab plain 18 mm thick

P.T.M.T. Grating square slit 150 mm

P.T.M.T. Urinal cock 15 mm dia

P.T.M.T. Bib cock with nozzle 15 mm

P.T.M.T. Stop cock (concealed) 15 mm

15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts

15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts

P.T.M.T. extension nipple 15 mm dia

P.T.M.T. extension nipple 20 mm dia

P.T.M.T. extension nipple 25 mm dia

Tactile tile

Matt finished vitrified tile 100x100 x16 mm

Vitrified tile

Modular common burnt clay bricks of class designation 7.5

Machine moulded perforated common burnt clay FPS (non modular) bricks of class designation 12.5

Machine moulded common burnt clay modular perforated bricks of class designation 12.5

Machine moulded common burnt clay FPS (non modular) bricks of class designation 12.5

Machine moulded common burnt clay tile bricks of class designation 12.5

Chemical Rust Remover

Epoxy

SBR Polymer

Woven PVC cloth

Adhesive chemical

Bit of drilling machine for Hole upto 30mm dia

GI injection nipple 12mm dia, 75mm long

Blowing compressed air for cleaning holes upto 30mm dia

L shaped 100mm long, 10mm dia mild steel shear key

Acrylic Polymer chemical for cracks

Shear loops (6mm dia GI wire rope) (For vertical joints) 6 nos on each side

dowel tubes (Corrugated GI pipes 50 to 80mm dia) (For horizontal joints)

Hooks for lifting (Alloy steel) having 2.5 tonne capacity

Hooks for lifting (Alloy steel) having 2.5 tonne capacity

Factory made EPS light weight composite sandwitched wall/roof panel (50mm thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kg per cum). The outer face on both sides of the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium silicate board confirming to EN 14306:2009 of 5mm thick each.

Factory made EPS light weight composite sandwitched wall/roof panel (60mm thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kg per cum). The outer face on both sides of the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium silicate board confirming to EN 14306:2009 of 5mm thick each

Factory made EPS light weight composite sandwitched wall/roof panel (75mm thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kg per cum). The outer face on both sides of the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium silicate board confirming to EN 14306:2009 of 5mm thick each

Factory made EPS light weight composite sandwitched wall/roof panel (90mm thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kg per cum). The outer face on both sides of the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium silicate board confirming to EN 14306:2009 of 5mm thick each

Factory made EPS light weight composite sandwitched wall/roof panel (100mm thick) having core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kg per cum). The outer face on both sides of the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium silicate board confirming to EN 14306:2009 of 5mm thick each

24 mm thick Factory made shutters with style, rails and panels of PVC extruded sections in white, grey or wooden finish

30 mm thick Factory made shutters with style, rails and panels of PVC extruded sections in white, grey or wooden finish

Factory made PVC rigid foam panelled shutter i/c carriage

Factory made PVC rigid foam panelled shutter as per IS : 4020 i/c carriage

Factory made PVC rigid foam sheet 1 mm thick

48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish

Factory made door frame PVC extruded sheet i/c carriage

Factory made EPS Core wallpanel /roof panel sandwiched between two Engineered welded wire fabric mesh of 3 mm dia G.I. wire mesh,with 50 mm pitch in both the directions, kept at 120-135 mm gap and interconnected by the zig zag G.I. wire of 3 mm dia at alternate row by welding.

Factory made door frame of size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

Expanded poly ethylene Foam sheet 4mm thick of Density 40kg/m3

High Density expanded poly ethylene (EPE) Foam 1mm thick

Fire rated door frame made with 1.6 mm thick G.I sheet (120 minutes fire rating)

Fire rated door shutter made with 1.6 mm thick G.I sheet (120 minutes fire rating) including hinges ( without glass panels)

GI sheet 0.8 mm thick confirming to IS 277:1992

Factory made EPS Core wall panel /roof panel sandwiched between two Engineered welded wire fabric mesh of 3 mm dia G.I. wire mesh, with 50 mm pitch in both the directions, connected by G.I. wire of 3mm dia at alternate row by welding