Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST. | |
| 2 | L2₹8.0 L+₹17,792 (2.29%)Rejected-AOC MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L2 | Rejected-AOC NOT LOWEST. | |
| 3 | L3₹9.4 L+₹1.6 L (20.5%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST. | |
| 4 | L4₹10.0 L+₹2.2 L (28.2%)Rejected-AOC | L4 | Rejected-AOC NOT LOWEST. | |
| 5 | L5₹13.1 L+₹5.3 L (68.7%)Rejected-AOC 48 CHANDAK LAYOUT GHAT ROAD NAGPUR | NAGPUR | L5 | Rejected-AOC NOT LOWEST. |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
21 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAGPUR
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR TO PATH, DRAIN, GATES, BOUNDARY WALL AND PCC HARD STANDING AND OTHER MISC WORKS IN OTM ACCN AT VSN NAGPUR
2022_MES_550768_2
GE/NAG/22-23/8562/32
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹20,000
28 Feb 2023
30 Nov 2022
28 Dec 2022
30 Nov 2022
21 Dec 2022
7 Dec 2022
Amount
Demolition of cement Concrete (unreinforced) in ground floors and paving n exc15 CM thk below or above ground level complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in CM mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Dismantling of structural steel work of any description including doors, gates but excluding framed trusses etc) all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as specified and as directed.
M & L for 100 mm thick plain Cement concrete 1:2:4, type B-1, using (20mm graded stone aggregate) complete all as specified and as directed.
M&L for PCC 100 mm thick in 1:4:8 type D2 using (40 mm graded stone aggregate) as in floors, path & hard standing etc all as specified and as directed.
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and as directed.
Taking down cement plaster on brick or concrete surfaces on wall etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed
M&L for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces, finished even and smooth surfaces without using extra cement complete all as specified and as directed
M&L for prepration of new plaster surfaces of wall and applying two coats of cement base paint over a coat of primer all as specified and as directed.
Material & Labour for two coats of exterior emulsion paint of white or any colour or equivalent colour as approved by GE using ultra clean paint or Delux ICI or Apex Ultima of Asian paints or equivalant in Berger paints over wall surfacesedges of slab, roof, chajja projection and columns after necessary preparation all as specified and as directed
M&L for preparation of old treated plastered or concrete surfaces and applying one coat of cement base paint all as specified and as directed.
supply only integral water proofing compound complete all as specified and directed.
M&L for Providing precast cement concrete type B0 1:2:4 (12.5 mm graded aggregate) louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame set in CM 1: 4 all as specified and directed.
M&L for type B-1, 1:2:4 (20mm graded stone aggregate, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M/L for welding in repairs n exc 2.5cm in length n exc 6mm thick complete all as specified and directed. (welding to ventilatars, windows, door, handles etc.)
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F mild steel framed work such as in doors or gates using angle or other sections with gusset plates, rails, braces etc complete, drilled for and including steel sheeting or covering as required. Doors etc to be prepared for hanging or sliding with and including hooks and hinges of steel for hanging door and other fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe-410- W(Gde E-250) quality B complete all as specified and as directed.
Excavating in post holes (or similar holes) each in loose/soft n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.
Dismantling fencing wire mesh, any type complete all as specified and directed.
Fixing only Chain link fencing including line wires any mesh size and type to any type of standards, rails straining bolts etc including provision of binding wire all as specified and as directed.
Supply only Chain link MS galvanised fencing, any size or type all as specified and as directed.
M&L for mild steel deformed bars 10 mm dia cut to length bent to shape required including cranking , bending and binding with MS wire (annealed) not less than 0.9 mm dia all as specified and as directed by engineer-in-charge
S&F in repair mild steel wire 4mm dia , galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified and directed. (Note: each line of wire to be measured)
Restraining & resecuring of plain mild steel wire any type including making good staples etc complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or grith and apply two coats of synthetic enamel over a coat of red oxide primer all as specified and as directed.
Maintenance of rolling shutters of any size upto 5.5 m wide with easioning, greasing, necessary welding to make the shutters full functional and easy operational including minor spares and materials costing upto Rs. 200/- as required and painting with synthetic enamal paint all as specified and as directed. Note Safety lever lock/ ball bearing and other major spares if required will be replaced and paid separately.
S&F Safety lever locks mild steel with 4 levers for rolling shutter all as specified and as directed.
S&F ball bearing for rolling shutters all as specified and as directed.
S&F MS vertical guide of rolling shutters of standard size and thickness matching to the existing including taking down old one all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises all as specified and as directed
M&L providing PCC 1:2:4, type B1 (using 20 mm graded aggregate), 40 mm thick, finishing cement concrete surfaces even and smooth using extra cement all as specified and as directed
M & L providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed.
M &L for polished Chequered cement concrete tiles 20cm x 20cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.
M&L for rendering 10 mm thick in CM 1:3 for laying wall tiles or vertical surfaces (skirting/ dado etc) complete all as specified and directed.
M& L for Mosaic tiles (swimming pool tiles) 2cmX2cm,4mm thick ,327mmX327mm (sheet) resistant to heat ,crazing,acid, fungi and anti fade,washable for floors of swimming pool ,water fountain etc including all necessary materials of fixing,complete as specified and directed by EIC as per site requirement.
M&L for factory made Machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 50 mm thick stone dust cousioning including taking out old broken paver blocks and remove from site, all as specified and directed
M/s Prakash R. Verma
VIJ ASSOCIATES
Varsha G Nagphase
dhanshree enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .