PERIODICAL SERVICES BY USING SMART PERIODICAL METHODILOGY TO CERTAIN BLDGS AT DOMESTIC AREA VAYUSENABAD AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD

Amount

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down Cement plaster and raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed by Engr-in-charge. Note: All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item.

M&L for one coat of acrylic waterbased interior grade primer 0.80 Ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed by Engr-in-charge.

M&L for complete removing of existing treatment by scrapping with Tri Care Wall Sander L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed by Engr-in-charge.

M&L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1mm, over the plastered/old painted what after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface with TruCare Wall Sander L 01/H-01 or equivalent (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7" or 9" to make the surface free from dust etc by skilled labour. Step (1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer Trucare Putty mixer with min 1400 W power havinng mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute) Step (2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Parts Trucare Graco Spray Machine(Mode EH 1230 Dt) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltr per minutes with a maximum pressure 230 bar having maximum tip size 0.041. Step (3) Allow 6-8 hrs time to dry the putty Surface

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed by Engr-in-charge. Note-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer, Proper mashking to be carried out before primer and paint application.

M&L for preparation of old decorated plastered or unplastered surfaces of walls. ceiling, chajja by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing rubbing down and stopping of previously untreated/painted surfaces and applying one coat of cement base paint, white or tinted complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for removal of old existing treatment of walls surfaces and applying a coat of white cement base wall care putty in patches as required and as directed by Engr-in-Charge finished even and smooth with sand paper and applying one coat of exterior weather proof water base emulsion paint in white or tinted complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and cornices, by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying two coat of white wash complete all as specified and directed by Engr-in-charge.

M&L for preparation of old decorated plastered or unplastered surfaces of ceilling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of white wash complete all as specified and directed by Engr-in-charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of oil bound distemper white or tinted over a coat of white putty in patches as required complete all as specified and directed by Engr-in-charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying two coat of oil bound distemper white or tinted over 1mm thick white putty by auto roller complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for writing letters or figures (Block roman, Italic or Indian) n.exc 30 cm High, letters shall be painted with thick synthetic enamel paint so that they stand out boldly and solidly without showing signs of brush marks complete all as specified and directed by Engr-in-charge.

M&L for writing stops, commas short lines dashes hyphens , brackets etc with thick synthetic enamel paint without showings signs of brush marks (If necessary they shall be repainted until the desired result is obtained) complete all as specified and directed by Engr-in-charge.

Bee Kay Engineers & Contractors (BID ID -3100293)

Neeraj Enterprises (BID ID -3105303)

FUTURE ENGINEERING (BID ID -3102948)

akenterprises (BID ID -3103312)

Mohd Talha (BID ID -3105149)