Various Construction work at Baghdarrah under Sajjangarh Wildlife Range.

Earthwork

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil B.S.R. B-1.8

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :, Hard rock (blasting prohibited) useful material 30%, B.S.R. B-1.9.3

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. B.S.R. B-1.25

Providing and injection chlopyrifous Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III 1971 as amended from time to time and creating a continuous chemical barrier under and around the column pits wall trenches basement excavation top surface of plinth filling junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (plinth floor area only shall be measured for payment) B.S.R. B-1.36

Concrete Work

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). B.S.R. B-3.1.2

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). B.S.R. B-3.1.6

Reinforced Concrete Work

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix B.S.R. B-4.1

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix B.S.R. B-4.3

Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. B.S.R. B-4.9

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blockes sills, chhajjas, lintel, beams etc. B.S.R. B-4.10.2

Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level Thermo mechanically treated bars (conforming to relevant IS:1786.) B.S.R. B-4.13.3

Masonry Work

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1 : 6 (1 cement : 6 coarse sand) B.S.R. B-5.2.2

Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in: Cement mortar 1:6 ( 1 Cement : 6 Sand ) B.S.R. B-6.1.6

Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : Cement mortar 1:6 ( 1 Cement : 6 Sand ) B.S.R. B-6.2.6

Add extra for facing as per design and detailed specifications including additional cost of stones B.S.R. B-6.4.1

Steel Work

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: B.S.R. B-9.2

Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Electric resistance or induction butt welded tubes. B.S.R. B-9.3.3

Flooring Work

Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm B.S.R. B-11.18.2

Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For slab area 2001 to 5000 sq.cm B.S.R. B-11.19.2

Random rubble dry stone kharanja under floor B.S.R. B-11.26

Finishing Work

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished, 25mm thick. B.S.R. B-12.3.1

6mm cement plaster to ceiling of mix 1:3 (1cement :3 fine sand) B.S.R. B-12.5

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. B.S.R. B-12.40.1

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work B.S.R. B-12.46.1

Providing and fixing aluminum work for doors , windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).

For fixed portion Powder coating aluminum ( minimum thickness of powder coating 50 micron) B.S.R. B-16.1.1.2

Shutters Powder coating aluminum ( minimum thickness of powder coating 50 micron) B.S.R. B-16.1.2.2

Panels wood Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. B.S.R. B-16.4.1

Panels glass With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. B.S.R. B-16.5.1

Road Works

Banking excavated earth in layers not exceeding 20cm. In depth breaking clods watering, rolling each layer with 1/2, tonne roller, or stone or steel rammers, and rolling every 3rd, and top- most layer with power roller of 8-10 tonne capacity, and dressing up in embankments for roads, flood banks, marginal banks, and guide banks etc. lead up to 50 Mtr. and, lift up to 1.5 Mtr. All kinds of soils

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.) B.S.R. R-4.12

Providing and laying of paver block as per IS 15658 : 2006(Indian standard for precast concrete block for pavingspecification)and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement)11.38.1 M-30, 60 mm thick to be used in non traffic areas like buildingpremises, monument premises, land scapes, public gardens/park, domestic drives, paths and patios, Embankment slopes,sand stabilization Area etc.( As per table 1 of IS 15658:2006(A) Category A Denated units to key into each other on four faceszigzag shape as per IRC SP 63:2004

Steel Work

Decra Sheet Roofing including hardware for fixing

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. Bsr Item no 14.55

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick . bsr Item no 12.2.2

6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3- fine sand) bsr Item no 12.5

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :25mm thick bsr Item no 12.2.1

Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineerin- bsr Item no 10.24

Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding. bsr Item no 12.36

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide bsrItem no 9.8 For gate , ladder , vindo ,

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. BSR Item No. 14.55

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick . BSR Item no 12.2.2

6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3- fine sand) BSR Item no 12.5

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :25mm thick BSR Item no 12.2.1

Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineerin- BSR Item no 10.24

Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding. BSR Item no 12.36

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Item no 9.8 For gate , ladder , vindo ,fencing

Please Enable Macros to View BoQ information