Strengthening of sivaramapettai road and Punnaiahpuram vadakku pillaiyarkoil to vadakku indira colony road in Kadayanallur Block In TSI Dt Pack.07

Clearing the Scrub jungle including all labour charges for burrying and burning etc.,

Earth work excavation and depositing onbank within initial lead and lift in hardgravelly soil for Cutting side drain etc,complete. as per SS20 A

Providing and Laying Gravel to 100mm compacted thick including cost & conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting byPower roller to achieve the required Proctor density at 100% compaction

Providing and laying TACK COAT over BT surface using 3 Kg of RS-1 Bitumen Emulsion/ 10 sq.m for preparatory toanother bituminous construction over it,including cost of material, labour charges,rentals for machinery,fuel and all otherincidental charges etc complete.includinglabour for spraying, hire charges forbitumen sprayer etc. Comp.

BC 25/30/40mm Thick (Grade-II) Using VG30 Bitumen and Plastic Waste Providing and laying BituminousConcrete to 25/30/40mm thick using 0.13cum of 19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and belowwith 46.28kgs of VG30 bitumen and4.02Kgs of Waste Plastic (6%) forpremixing per 10sqm including cost andconveyance of all materials to CMP site,heating the bitumen and aggregate torequired temperature and mixing them inrequired temperature in central hot mixplant 20-30 ton capacity, conveying themix by tipper trucks to paver site,spreading the mix to uniform thickness of 40mm with mechanical paver to thespecified grades and cross sections andconsolidated by 8-10 tonne Vibratory tothe required density etc., including labourfor attending to paver to site etc.,including hire charges and fuel chargesfor 20-30 t CMP with bitumen boiler,tipper trucks, Paver Finisher, Vibratoryroller and all other tools and plantrequired, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507of MORTH Rev-5

Providing and laying of hot appliedThermoplastic compound 2.5 mm thickincluding reflectorising glass beads @250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glassbeads as per IRC:35. The finished surfaceto be level, uniform and free from streaksand holes etc., complete as per MoRT&Hspecification No.803

Provision for Hectometer Stone

Providing and erecting of Retro -Reflectorised Cautionary, Mandatory andInformatory signs (without definitionboard) made out of High IntensityPrismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 andASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixedover a back supporting frame of 25mm x25mmx3mm Mild Steel angle andsupported on a mild steel angle post 75X75X6mm with a clear height of notless than 2.10m from the ground level tothe bottom of the sign board and 0.60mbelow ground level. The sign post shouldbe painted as per IRC 67-2012 and firmlyfixed to the ground by means of properlydesigned foundation with M15 gradecement concrete 45cmX45cmX60cm sizeincluding cost and conveyance of allmaterials, equipment, Machinery and labour with all leads and lifts, loadingcharges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro - Reflectro sheet shall consist ofminimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro- reflective sheeting shall be covered under 7 year warranty issued for fieldperformance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 . ( as per MoRT&H Specification No.801) 90 cmoctagon