Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.1 LAccepted-AOC | ₹8.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹8.7 LRejected-AOC | ₹8.7 L | L2 | Rejected-AOC L2 |
| 3 | L3₹9.5 LRejected-AOC | ₹9.5 L | L3 | Rejected-AOC L3 |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
24 Sept 2020, 3:00 pmClosed
Executive Engineer, WRD
Ground Water Division, 3rd Floor, PWD Complex, Gandhi Nagar
Renovation of sub divisional Data processing centre at Vellore for the year 2020-2021.
2020_MDBPW_177957_1
TN/NHP/GWD/VLR/SDPC/2020-21/01
Open Tender
Civil Works - Buildings
120 days
Vellore
As per Bid document
3 documents required · 3 mandatory
₹0
₹16,000
9 Mar 2021
3 Sept 2020
24 Sept 2020
3 Sept 2020
24 Sept 2020
3 Sept 2020
Amount
Dismantling, clearing away and carefully stacking materials of Chipping the concrete and roughening the surface., complete and as directed by the departmental officers.
Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
Renewing of Indian Water Closet(Oriya type) of size 580 x 440mm colour glazed earthernware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming alround the closet using 40mm broken brick jelly in lime concrete 1:2:5(one lime Two sand & five brick jelly) 100mm thick & finishing the top to the required slope and includung giving necessary connection to PVC pipes(including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling bick masonry wall / reinforced cement concrete roof / floor slab and makung good the dismantled portion to the original condition with leakages et., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by Executive Engineer before use on works).
Supplying and painting the walls with Two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Painting old wood work with two coats of synthetic enamel ready mixed paint of approved quality and colour in all floors complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Supplying Fabricating and placing in position of Aluminium natural colour matt finish fixed Partition with 5.50 mm thick plain glass the outer frame of the Aluminium section of size 101.60x44.45x3.18mm @ 2.319Kg/m. at internal vertical 2 Nos & Horizontal 1 No, mullion of aluminium section of size 62 x 38 x 2mm @ 1.174 Kg/m with necessary aluminium clips of size 79.15 x 17.27 x 1.50mm at 0.176 Kg/m with necessary rubbor beading L angles including dismantling and redoing masonry as concrete where necessary etc., complete. The Aluminium section are to be anodised with matt finish under electrically controlled condition in all with ISI 1868 / 1962 specification for an average anodie film thickness of not less than 15 microns. All aluminium sections are should be got approved by Executive Engineer before use on works.
Providing Aluminium Sliding shutters for cup-boards with the following specification the outer are made of Aluminium box section for frame, vertical, horizontal and intermediate mullion 50 x 44.50 x 2.50mm at 1.292 kg./m particle board 12 mm thick and 4 mm thick glass pans. They are to the masonry with TW plugs and screws over which 12mm double channel of anodised aluminium is screwd to serve as guide way to the sliding shutter, sliding shutters fitter with superior quality wheel is moves in the double channel shutters of 12mm thick made of flat pressed three layers material prelaminated particle board are used with teak wood beading around the shutter.
Hydraulic Door closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like HARDWYN (make) 'GAZEL' (or) equivalent (with ISI Monogram)
Supply and erection of Indoor units of 1.5 ton capacity (3Star) splilt type Air conditioner unit confirming to ISI 1301 (Part 2) 1992 with amendment No.1 fitted with Hermetically sealed compressor operation on 230 v 50 Hz AC supply system with energy efficient operating system with rerigerant gas R -22 suitable for high wall mounting evaporator and specification as under general requirement interconnection of pipes and cables.
Supply and erection of 4KVA capacity Automatic voltage stabilizer suitable to operation on 230 V single Phase, 50Hz AC supply system with time delay relay and High/ Low voltage cutt off, Input voltage range 170 V to 270 V AC Single Phase, Wall mounting Type stabilizer with necessary clamp.
Supplying and Fixing in position of cup-board shutters made of Teak wood scantling of size 100mm x32mm for outer frame,horizontal and vertical members.the shutter should be of 12mm thick both side pre-laminated partical board (exterior grade) with teakwood external lipping of 25x12mm.The shutters are fixed to the frame with required 6 numbers of aluminium hinges 100x30mm, 2Nos. D type aluminium handle 100mm, 2Nos, of aluminium tower bolts 75mmx10mm, 1No cupboard lock,etc.The country wood frame shall be painted two coats with synthetic enamal paint over coat of wood primer. The pre-laminated particle board and furniture fittings used should be got approved by the Executive Engineer before use on works. The cost includes cost of all materials labour charges etc.,
Supplying, Fabricating, erecting and fixing Hilux (or) equivalent Gyp Board FALSE CELING upto a ceiling height of 4.50 m from floor level using Hilux board Perforated sheet 10mm thick which includes shaped GI channels of size 25 x 25 x 0.50 mm thick suspended from ceilling at 1.2 m both longitudinal and cross vertical support and fixing shaped GI channels of size 50 x 30 x 0.50 mm and 150 x 10 x 0.50 mm thick at 0.60m centre longitudinal and cross difrection for vertical supports and fixing U shaped GI channels of size 50 x 30 x 0.50 mm thick and 50 x 10 x 0.50 mm thick at 0.60 m centre to centre in cross direction and respectively for horizantal supports of zig - zag pattern and fixing of Gyp board in the panel provided in the desing pattern given and sprating the standard spection and as directed by the departmental officers. The rate shall be inclusive of finishing the edges and wall junctions with suitable lipping and cornice arrangements.
Supplying and Fixing of fly proof mesh fixed rigidly with teak wood frame of size .075x.025m(3"x 1") including cost of all materials and labour charges etc., complete complying with standard specification.
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 meter down rod on the existing clamp.
Supply and fixing of FLUORESCENT TUBULAR LAMPS WITH ISI MARK 4' 18W Crystal Glass LED Tube Light Fitting (Havells / Equivalent)
Provision for Electrical work of Call Bells
GST for line items 1 to 17
SIVASAKTHI CONSTRUCTIONS
BHARATHI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid