Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.7 L
Closing Date
28 May 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CIVIL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work:- Execution of any Civil engineering works.
20 conditions · 6 needing a document upload
Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. Annexure Description 1. Annexure-I(a) Details of the Works Completed by the Tenderer during the last seven years to be filled & submitted as per Annexure-I(a). 2. Annexure-I(b) Details of contractual payment received by the Tenderer during the last 3 (three) financial years including the current financial year to be filled & submitted in Annexure-I(b). 3 Annexure-II Details of Plants and Machinery with the Tenderer to be filled & submitted as per Annexure- II. 4 Annexure-III Details of Personnel and Organization of the Tenderer to be filled & submitted as per Annexure-III. 5 Annexure-IV Details of Works Presently on hand of the Tenderer to be filled & submitted as per Annexure- IV. 6 Annexure-V Details regarding Association of Railway Officer(s) with the tenderer to be filled & submitted as per Annexure- V. 7 Annexure-VI List of the Arbitration Cases of the Tenderer during last five years to be filled & submitted as per Annexure-VI. 8 Annexure-VII List of the Court Cases of the Tenderer during last Five years to be filled & submitted in Annexure- VII. 9 Annexure- VIII NEFT MANDATE FORM. All Payments to the agency (including the refund of the Bid Security of the unsuccessful bidder preferably) will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure- VIII. 10 Annexure-IX GST COMPLAINT INVOICE : To be filled & submitted as per Annexure-IX. 11 Annexure-X FORMAT FOR CERTIFICATE TO BE SUBMITTED / UPLOADED BY TENDERER ALONGWITH THE TENDER DOCUMENTS as per Annexure-X. 12. Annexure-X(A)-This certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. 13. Annexure-XI LETTER OF CREDIT: To be filled & submitted as per Annexure-XI. 14.Annexure-XII BID SECURITY: Bank Guarantee Bond from any scheduled commercial bank of India to be filled & submitted as per Annexure-XII. 15.Annexure-XIII Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) to be filled & submitted as per Annexure-XIII. 16. Annexure- XIV TENDER FORM (FIRST SHEET)- Tender Form (First Sheet) to be filled & submitted as per Annexure-XIV. 17.Annexure-XV TENDERER'S CREDENTIALS (BID CAPACITY) to be submitted as per Annexure-XV. (This annexure will be applicable, if tender having advertised value more than Rs 10 crore wherein eligibility criteria includes bid capacity)
Each Bidder or each member of a JV must fill details of Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) in annexure-XIII form separately and submit the same with the offer followed by the guidelines as mentioned in this annexure. The format of Annexure-XIII ( Ref- Annexure-VIB of GCC-2022) is available in commercial compliance Annexure in documents section of this tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT , etc. are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII,IX,XI, XII, XIII, XIV. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's.
Open tender for new halt station at Sijuwa in between Krishna ballabh sahay halt station and Maheshmunda station in MDP-GRD Section
O-AC-T-19-26-27
O-AC-T-19-26-27
Open
Works - General
12 Months
Paschim Bardhaman, West Bengal
₹0
₹3.7 L
28 May 2026
30 Apr 2026
14 May 2026
5 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Carrying out resistivity survey conduction, geographical survey for cach VES, scanning a depth of 150 mts. BGL to delicated sub - surfclithology adopting electrical method of geophysical survey for cach driling point. Minimum 10 nos. of vertical electrical sounding including conducting hydrogical investigation, adopting suitable area so that the recommendation of the best on the basis of 10points of drilling for ground water and submitting report from the recognized Govt. approved institution or firm to the Railway authority. | Job | 1.00 | 40,594.89 | 40,594.89 |
| 2 | Supplying and fixing of Precast RCC coping slab of size 1125x525x100mm of grey colour of approved brand. The rate includes all material and labour, transportation, loading, unloading, fixing etc required. The slabs are to be fixed over a layer of 12mm cement plaster in CM (1:4) (cost of underlayer cement mortar to be paid separately) | Sqm | 380.00 | 2,742.14 | 10,42,013.2 |
| 3 | Providing hoisting and fixing in position M-25 Grade reinforced cement concrete in precast standard platform wall sections including the cost of centering, shuttering, finishing, admixtures in recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability, but excluding cost of cement and steel reinforcement as per approved plan & as per direction of the Engineer incharge. | cum | 260.00 | 6,511.17 | 16,92,904.2 |
| 4 | Supply of Welded Mesh Panel fencing (powder coated material 80 micron) (Rate including GST & Contractor profit). Raw material GI wire (4mm dia.) mesh size 50x200mm and panel size 1800mm x 2500mm must be manufactured from wire rods rolled only from secondary refined steel (at least LRF treated). Wire rods should strictly conform with the requirements of IS 7887 and IS 280.Only hot dip galvanized wire should be used in making the fencing product. Zinc used for galvanizing should be of at least 99.95% purity for better corrosion resistance. In the galvanizing process, the Zinc bath should be free from addition of lead.GI wire used should have a secondary coating of organic/inorganic nature with thickness not more than 5 microns. Secondary coating should be completely non-hazardous to humans and animals. Should be free from Chromium and other heavy metals such as lead, mercury, Arsenic & Cadmium. When tested as per ASTM B117, secondary coated GI wire should display time to reach 5% red rust, at least 2 times that of normal GI wire of same Zn coating level. Powder coated fence post (RAL 6005) with 80 micron thickness of dimension 60x40x2mm and length 2400mm (GI RHS-120GSM ) with spider clamps, anchor rods and SS 304 mushroom carriage nut bolt with security nut to be supplied alongwith hot dip galvanized anchor rods. Powder coating must withstand 1000 hours of salt spray test. Erection of fencing including all fitting, fixing and excluding the foundation of Civil Works. (Rate including GST & Contractor profit) | Kilometre | 0.14 | 27,21,726.94 | 3,81,041.77 |
| 5 | Supplying, Fitting, fixing prefab building both sides external and internal partition with 50mm thick cement wall panel with suitable steel structure, false ceiling, painting, sliding aluminium 2 track windw with 500mm thick glass & MS door frame with flush door with accessories & electrical wiring with switch & socket, plumbing & sanitary piping only internal, providing and fixing false ceiling, flooring with vetrified tiles in all respect as per Engr. in charge. Rate includes all lead, lift of materials at site including GST. | Sqm | 12.00 | 17,351.38 | 2,08,216.56 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11.pdf
ATTACHMENT
Tenderdocuments.pdf
ATTACHMENT
AnnexuresforCommercialcompliances.pdf Annexures for Commercial Compliance
ATTACHMENT
JPOTelecomcircular9of2023_1.pdf
ATTACHMENT
ANNEXURE-X_A_.pdf
ATTACHMENT
Annexure-X_1.pdf
ATTACHMENT
Annexuresoftechnicalcompliancess.pdf
ATTACHMENT
ACSlipsGCC-2022.pdf
ATTACHMENT
GCC-2022_2.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
AnnexuresforCommercialcompliances.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .