IMPROVEMENT OF PATH, PLINTH, HARDSTANDING, COMPOUND WALL IN JCOs/OR QTRS IN ZONE A AND B AREA MIRAN SAHIB UNDER GE JAMMU

Amount

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water and removing all the demolished material outside defence permises complete, all as specified and as directed by Engr-in-Charge.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles and removing unserviceable material exc 100 mtrs, complete all as specified and directed by Engr-in-Charge

Dismantling cast iron work of any descriptions, complete all as specified and as directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work masonry, etc., any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engr-in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and as directed by Engr-in-Charge.

Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.

Description all as per item No 08 above but except brick.

75 mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base to floor, complete all as specified and as directed by Engr-in-Charge.

75 mm thick Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in floors/plinth protection laid in alternate panels finished even and smooth without using extra cement and surface vibrators, complete all as specified and as directed by Engr-in-Charge.

100 mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement complete all as specified and as directed by Engr-in-Charge.,

100 mm thick PCC 1:2:4 type B-1 using 42mm graded crushed stone aggregate as in floors laid in alternate panels finished even and smooth without using extra cement and surface vibrators, complete all as specified and as directed by Engr-in-Charge.

Providing, Plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) in roof kerbs or mud stops, rounded or chamfered on edges, including mixing Liquid water proofing compund in the proprotion as mentioned in manufacturer's instructions complete all as specified and as directed by Engr-in-Charge. Note : Water proofing compund to be measured and paid for separately as supply only.

Plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, complete, all as specified and directed by Engr-in-Charge.

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete, complete all as specified and as directed by Engr-in-Charge.

Cement concrete tiles 25cm x 25cm and 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and in floors, and cut and polished , over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed by Engr-in-Charge.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete, all as specified and as directed by Engr-in-Charge

Laying only Machine pressed / vibro mechenically floated coloured interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement with imported pigment including 50 mm thick sand cushioning bed including spreading levelling watering if required, Shape shall be approved by Engr-in-Charge.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed by Engr-in-Charge.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 10cm and n exc15cm long, dia of neck 5 to 10 mm, complete all as specified and directed.

Supply Only 3 mm dia GI Wire Chain link fencing and line wire 75mm x 75 mm mesh size and any type of strand rails straining bolits etc. inclucing provision of binding wire complete, all as specified and as directed by Engr-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete, all as specified and as directed by Engr-in-Charge

Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings and strainning and fixing to any type of standrad rails strainning bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire is to be measured )

Description all as per Srl item No 24 here-in-before but titening old barbed wire & Restraining resecuring including making good staples etc. complete, all as specified and as directed by Engr-in-Charge

M&L in repair concertina coil fencing with punched tape concertina coil 450mm dia 10 mtr openable length (total length 90mtr) having 50 nos round per 6 meter length, spring core wire (2.5mm thick) of high tensile strength of 165 Kg/ sqmm with tape (0.52mm thick) and weight 43.478 gm/ mtr and fixing the same on Y shaped angle iron placed 2mtr apart and with 6 horizontal RBT (reinforced barbed tape) wire, stud tied with GI staples sand GI clips to retain horizontal, including necessary bolts, all complete as per direction of Engineer-incharge.

15 mm thick rendering in two layer (10mm + 5mm) on fair faces of brick /concrete on wall including facia chhajja etc.surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing Liquid water proofing compund in the proportion as mentioned in manufacturer's instructions including necessary scaffolding upto three storey etc., complete all as specified and as directed by Engr-in-Charge. Note : Water proofing compund to be measured and paid for separately as supply only.

Supply only liquid water proofing compound, complete all as specified & directed by Engr-in-Charge.

Preparing newly plastered or unplastered surfaces of wall and applying two coats of cement base paint and including over a coat of primer, complete all as specified and as directed by Engr-in-Charge.

Preparation of old decorated plastered /concrete/ brick surfaces of walls and applying one coat of cement based paint on old decorated surfaces including preparation complete, all as specified and as directed by Engr-in-Charge

JK BUILDERS AND DEVELOPERS

M/S Shesh Paul Gupta