SPECIAL REPAIRS TO BLDG. NO X (OR MARRIED ACCN) AT MADRAS REGIMENTAL CENTRE WELLINGTON UNDER GE WELLINGTON

Amount

B/R Works Dismantling of single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed

Dismantling of single layer Mangalore pattern or similar tiles in ridge of roofing fixed withy cement mortar complete all as specified and as directed

Dismantling of battern for tiles shingles etc spaced exc 15 cm C/C etc.complete all as specified and as directed

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed.

Material and labour 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed

All as per description of serial item No 05 here in before but except sheets complete all as specified and as directed

Material and labour for second class hard wood clean sawn batten exc.5sq. cm and not exc.15 Sq.cm in sectional area ,at 30 cm centres complete all as specified and as directed

Fixing only for second class hard wood clean sawn batten for exc 5Sqcm and not exc. 15 Sq.cm in sectional area ,at 30 cm centres complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work such as rafter, beam etc complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed .

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 2nd class hard wood, clean sawn, as in scantling, purlins, rafters etc fixed to timber frame work complete all as specified and as directed.

Material and labour for preparation of wooden surfaces and applying two coats creosote oiling over wooden surfaces all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided etc complete all as specified and as directed.

Material and labour for providing PCC 1:2:4 type B0 using 12.5mm graded stone aggregates avg Th 50mm as in levelling/ padding course on roof slab, projections on similar surfaces existing with slope, making the surface even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 laid over the RCC roof slab, parapet wall when the concrete is green. at any height and making the surface fair and even without using extra cement including using liquid integral WPC as per manufacturer instructions complete all as specified and as directed. Note: Supply of Integral water proofing compound shall be measured and paid separately.

Material and labour for APP modified prefabricated polymeric membrane 4mm thick and weighing not less than 4.5 kg/sqm reinforced with non woven polyester matt black finished, weighing not less than 100 gm/sqm having softening point not less than 140 degree Celsius longitudinal tensile strength not less than 300N/Sqcm, side lap and end lap 10 cm with torch application of membrane, over compatible primer at the rate of 0.40 Ltr/Sqm and finishing with aluminium paint applied at the rate of 0.10 Kg/Sqm finished complete all as specified and directed. Note: The work shall be carried out by authorised applicators of manufacturer's.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), depositing debris out side MD land complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 350mm x 7mm on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm as in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in cement mortar 1:4 complete all as specified and as directed.

Material and Labour for Coloured Non Skid ceramic joint free tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM(1:3) complete all as specified and directed.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in cement mortar 1:4 complete all as specified and as directed.

Dismantling wall and ceiling board fibre pulp insulation etc or insulation boards/ slabs blankets any thickness, including cover fillets/ frame complete all as specified and as directed.

Material and labour for GI frame work for frame size 605mmx605mm ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.

Material and labour for Exposed metal frame ceiling with 12mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and as directed (Note: Frame work for ceiling shall be measured and paid separately)

Material and labour for two coats of oil bound distemper on ceilings over priming surfaces with alkali resistant priming paint over including preparation of surfaces complete all as specified and as directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed

Material and labour for precast cement concrete block masonry with solid blocks made out of PCC 1:3:6, type C-1 with using 20mm graded stone aggregate, exceeding 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed.

Dismantling of Stone sett paving of any description or thickness laid bedded and pointed in any mortar complete all as specified and as directed

Material and labour for 75mm thick plain cement concrete 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base of flooring, finished even and fair etc complete all as specified and as directed.

Material and labour for Machine cut kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 20mm thick screed bed in cement mortar (1:3) laid and jointed with grey cement slurry mixed with pigment, complete all as specified and as directed

Material and labour for Machine cut kota stone 20-25mm thick vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:3 rough finish to receive the tiles complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed.

Material and labour Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and 5mm thick in cm 1:4 over a coat of 10mm thick finished even & smooth (without using extra cement), mixed with water proofing compound complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately

Supply only Liquid water proofing compound complete all as specified and as directed

Material and labour for rendering 5mm thick on concrete surfaces of ceiling, chajja in cement mortar 1:3 and making the surfaces with even and smooth finishing without using extra cement etc complete all as specified and as directed.

Material and labour rendering 10mm thick in cement mortar 1:6 on fair faces of PCC block masonry or concrete surfaces as in internal walls, finished even and smooth without using extra cement etc complete as specified and directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over one coat of primer over 3mm thick wall care putty etc complete all as specified and directed.

Material And Labour for preparation of new plastered surfaces in ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new surfaces etc complete all as specified and as directed.

Material and labour for Preparation of old treated of ceiling surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moss and efflorescent and treating oil and greasy spots etc and applying One coat of white wash complete all as specified and as directed.

Material and labour for complete removal of existing treatment on surfaces of wall and applying one coat of primer (water thinable/solvent thinable) over one coat 3mm thick putty even and smooth and applying two coats of oil bound distemper (washable) complete all as specified and directed.

Material and labour for complete removal of plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new surfaces etc complete all as specified and as directed.

Supply and fix in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm including coupling, PVC waste pipe of 32mm bore of suitable length, complete all as specified and as directed

Supply and fix in repairs gun metal globe or gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked complete all as specified and as directed.

Supply and fix in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.) complete all as specified and as directed.

Supply and fix 1000 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including taking down existing tank etc complete all as specified and as directed.

Supply and fix for concealed steel water tubing 15mm bore dia medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees , short pieces, connectors , back nuts, diminishing pieces , caps and plugs , unions etc) and making good to faces where-ever required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, cills, sunsheds, shleves, lintels etc. including taking down old steel tubing and connections including cleaning for refixing or removal to store etc complete all as specified and as directed.

Supply and fix for concealed steel water tubing 20mm bore dia medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees , short pieces, connectors , back nuts, diminishing pieces , caps and plugs , unions etc) including taking down old steel tubing and connections including cleaning for refixing or removal to store etc complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from frame) not exceeding 1.5 sqm each including fittings complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening complete all as specified and directed

All as per item 52.00 above but refixing of shutters in same opening, after re-securing proper opening & closing of any descriptions exc 1.0 sqm but.n.exc 2 Sqm each complete all as specified and as directed

Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supply and fixing as specification and drawing complete all as specified and as directed

Supply and fix factory made solid panel face PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded grain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly etc complete all as specified and as directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Material and labour for sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fixing to the frame any type all as directed and as specified.

Material and labour for 2nd class hardwood for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc. complete all as specified and as directed.

Supply & Fixing 2nd class hard wood made plain framed panelled door shutter 35 mm thick (any number of panel) with veneered particle board medium density 12 mm thick complete all as specified and directed.

Supply and fix, second class hard wood, 35mm thick factory made 2nd class hard wood glazed and skeleton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and as directed by Engineer-in-Charge.

Hacking out old glass and S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed.

Supply and fix aluminium handles, fabricated type, anodised extruded section 150 mm long complete all as specified and as directed.

Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250mm long, ISI marked complete all as specified and as directed.

Supply and fix mild steel butt hinges, medium weight, cold rolled of size 100mm with ISI mark complete all as specified and as directed.

Supply and fix floor door stopper overall length of cover plate 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix in repairs floor door stopper overall length of cover plate 150mm long cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed.

Supply and fix mild steel flat iron hold fast and similar small articles conforming to Fe-410 Gde-E-310 complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in roof padding, coping, bed plates, hold fast blocks etc., including formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description, over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparing new wooden surfaces of any description, not exceeding 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 Cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided etc and removal of debris outside MD land including site clearance complete all as specified and as directed.

Material and labour RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm graded aggregate) complete all specified and directed. Note: Reinforcement and form work shall be measured and paid separately.

Material and labour for use & waste of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. to flat rough finished surfaces of concrete square or rectangle complete all as specified and as directed.

Material and labour TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fix in repairs white vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with PVC seat cover, mild steel chromium plated hinges & nuts including ‘P’ trap / 'S' trap, connection to drain flushing pipe, antisyphonage pipe complete all as specified and as directed.

Supply and fix in repairs PVC valve less, syphonic action type low level flushing cistern 10 litre capacity white with inlet ball valve, float and handle including brackets, including flush pipe of polyethylene of low or high density complete all as specified and as directed.

Supply and fix for Vitreous china Counter Wash Hand Basin including fixing accessories, any shape size not less than 550x400 mm including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore Pillar Tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed in repairs complete all as specified and as directed Note: The unit rate quoted shall be deemed to include the cost of WHB, brackets, waste coupling and waste pipe

Material and labour for 20 mm thick Granite (of any type) work steps, jambs, pillars, window-cills, cooking platforms and wash hand basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed

Supply and fix Stainless steel plate rack of size 1200 x 900 x 300 mm thick fixed to wall complete all as specified and directed.

Supply and fix for Long Body Bib Tap Fancy Type Chromium plated fixed to 15mm dia in repairs,complete all as specified and as directed.

Supply and fix in repair 15mm bore stop valves, long shank concealed type cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fix for Chromium plated fancy type 2 in1 bib tap fixed with existing pipe all as specified and as directed fixed in repair .

Supply and fix in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fix for PVC Connections for 15mm size 450mm length and fixed in repairs complete all as specified and as directed.

Supply and fix in repairs Chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fix Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and fixed in repairs complete all as specified and as directed

Supply and fix in repairs for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

Supply and fix PVC (SWR) Floor/Nahani trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified and as directed

Supply and fix for Gratings 125mm dia with/ without waste hole, fixed in repairs complete all as specified and as directed.

Supply and fix in repairs soap dish , any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed

Demolition and breaking up drain pipes of any description of size 100mm complete all as specified and as directed.

Material and labour for PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

Material and labour for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

Material and labour for PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

Material and labour for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

Material and labour for PVC (SWR) bends 110 mm any radius, complete all as specified and as directed.

Material and labour for PVC (SWR) bends 75mm any radius, complete all as specified and as directed.

Material and labour for PVC (SWR) bends 110 mm any radius, with access door complete all as specified and as directed.

Material and labour for PVC (SWR) bends 75mm any radius, with access door complete all as specified and as directed.

Material and labour for PVC (SWR)110 mm branch piece,(single Y) equal or unequal complete all as specified and as directed.

Material and labour for PVC (SWR)75 mm branch piece,(single Y) equal or unequal complete all as specified and as directed.

Material and labour for PVC (SWR)75 mm branch piece, double (double Y) equal or unequal complete all as specified and as directed.

Supply and fix stack clamps out of 50mm by 5mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified and as directed

Supply and fix stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 100mm bore of pipe, complete all as specified and as directed

Supply and Fixing fancy type decorative drapery rod 20 mm dia including side caps and brackets, as in repairs complete all as specified and as directed

E/M Works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

All as per item No. 111.00 above but for One light / fan point controlled by one, one way switch complete all as specified and as directed

All as per item No. 111.00 above but for One light point controlled by two, two one way switches complete all as specified and as directed

All as per item No. 111.00 above but for One 3 pin 5 Amps socket outlet point on independent board complete all as specified and as directed

All as per item No. 111.00 above but for One 3 pin 5 Amps socket point on the same board with other switches controlled by one switch complete all as specified and as directed

All as per item No 111.00 described here-in-before but for point wiring with 2.5 sqmm single core standard FRLS copper conductor and one run of 2.5 sqmm FRLS copper conductor, standard for earth wire for one 3 pin socket outlet point 15 amps on the independent board.

All as per Item No.111.00 hereinbefore but point wiring complete One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed.

Supply and fix Call bell electric (Multi Music type) suitable for working on 230 volts AC supply complete all as specified and as directed.

Supply and fix Ceiling rose, surface type polycarbonate insulated body, three terminal 65x32mm, ISI marked complete all as specified and as directed.

Supply and fix Modular socket, 6A - 2/3 pin combined 2 module, ISI marked complete all as specified and as directed.

Supply and fix Modular switch 1 way 6A, 1 module, 230V, AC, 50Hz, single pole ISI marked complete all as specified and as directed.

Supply and fix Modular switch 2 way 6A, 1 module, 230V, AC, 50Hz, single pole ISI marked complete all as specified and as directed.

Supply and fix Modular Bell push 6A, 1 module, 230V, AC, 50Hz, single pole ISI marked complete all as specified and as directed.

Material and Labour modular metal flush box 1/2 module rectangular block for mounting, switches, sockets, fan regulator etc. complete all as specified and as directed.

All as per item No. 124.00 here in before but 3 module complete all as specified and as directed.

All as per item No.124.00 here in before but 4 module complete all as specified and as directed.

All as per item No. 124.00 here in before but 6 module complete all as specified and as directed.

Material and Labour modular white cover plate with frame White cover plate with frame,1 module complete all as specified and as directed.

All as per item No. 128.00 hereinbefore but 2 module complete all as specified and as directed.

All as per item No. 128.00 hereinbefore but 3 module complete all as specified and as directed.

All as per item No. 128.00 hereinbefore but 4 module complete all as specified and as directed.

All as per item No. 128.00 hereinbefore but 6 module complete all as specified and as directed.

Supply and fix sub main wiring with using two single core 6.0 Sqmm copper multi stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multi stranded conductor PVC insulated and unsheathed (FRLS) as earth wire using ISI marked IS 694 1100 Volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade PVC conduit of size not less than 20mm dia ISI marked of suitable size including conduit fitting and accessories complete including end termination with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required including taking down sub main wiring complete all as specified and directed. Note: Two runs of 6 Sqmm cable and one run of 6 sqmm earth wire and conduit of suitable size shall be measured as one unit

Taking out unserviceable thermostat and supply and fix new thermostat suitable for 25 Ltr capacity geyser , range 30° C to 80° C and acting at 70°C complete all as specified and as directed.

Taking out unserviceable PVC connections and supply and fix new PVC connection up to 600 mm in length suitable to connect GI pipe 15 mm dia to hot water outlet of geyser all as specified and directed.

Taking out unserviceable Non Return valve and supply and fix new Non Return valve suitable for geysers up to 25 Ltr capacity complete all as specified and directed.

Taking out unserviceable safety valve and supply and fix new safety valve suitable for geysers up to 25 Ltr capacity complete all as specified and directed.

Taking out unserviceable Geyser Copper Drum and supply and fix new copper Drum suitable for geysers up to 25 Ltr capacity complete all as specified and directed.

Supply and fix in repair MCB, SP of capacity 6 to 32 Amp, 'C' Series, 240 Volts as ordered breaking capacity 10 KA ISI marked and complete all as specified and as directed .

Supply and fix in repair MCB, SP of capacity 6 to 32 Amp, 'C' Series, 240 Volts as ordered breaking capacity 10 KA ISI marked and complete all as specified and as directed .

Taking down old unserviceable FTL fittings, Supply and fix 22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. Havells Cat Part No. LHEXAWPN7IN1W025 / CG/ Philips / Bajaj or equivalent make as per list of manufactures.

LED dimmable LED panel size 595mm x 595mm, 40 watt, 6000K, 100 Watts/Luman, 220V AC surface mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Luker product code- LPS40 or equivalent make as per list of manufactures

Taking down old unserviceable Indoor wall light fitting, Supply and fixing of suitable size complete all as specified and directed. Make :- HAVELLS Cat Part No-LHFOFWE1TZ1W012/ Philips/ Crompton/ LUKER or equivalent make as per list of manufactures

Taking down old unserviceable Bulk Head fittings, Supply and fix 10W LED Bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

Taking down old unserviceable 2ft FTL fitting Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC 125 Lum/Watt decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: - Havells Cat Part No-LHEXACP5IN1W010 or equivalent make as per list of manufactures

Material and Labour Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

Taking down old CFL bulb, Supply and fix 9 W, White LED Candle bulb operating voltage 120-300 V B-22 holder type all as specified and directed. Make: Luker product code- LBPC09CL or equivalent make as per list of manufactures

Taking down unserviceable Plug and socket and Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20A SP MCB all as specified and directed .

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 4 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

All as per item no. 149.00 hereinbefore but 8 way complete all as specified and directed

Supply and fix Modular switch 1 way 16A, 1 module, 230V, AC, 50Hz, single pole ISI marked complete all as specified and as directed.

Supply and fix Modular socket, 6A/16A - 2/3 pin combined 2 module, ISI marked complete all as specified and as directed. .

Taking down unserviceable building security light and Material and labour for LED Security Light fitting of 35 Watt comprising of epoxy powder coated housing enclosed with glass cover in frame with protection IP 65/66 complete with all accessories and lamp colour white,110 Lumen/Watt all as specified and directed.

Material and Labour for GI Pipe (Medium Grade 40 mm) bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers complete all as specified and directed.

Cutting chases in Brick masonry wall/concrete floor for laying GI Pipe and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth or equivalent make in list of manufactures.

Supply and fix exhaust fan, steel body AC single phase 230V of size 300mm sweep with,blades,and frame and louvers including making opening brick/stone Masonry Wall as per requirement of Exhaust Fan and make good and matching with existing surfaces complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz,RPM 1200, copper Winding of sweep 250 mm complete all as specified by Engineer-in-Charge.

M SUNDARARAJAN (BID ID -3512182)

S.RAMACHANDRAN (BID ID -3512683)

P K ENTERPRISES (BID ID -3512418)

SREE CONSTRUCTIONS (BID ID -3511148)

lakshmibuilders (BID ID -3512491)

K.AYYAPPAN (BID ID -3512201)

K S MUTHU CONSTRUCTTIONS (BID ID -3512368)