REPAIR/ RENOVATION OF TOILETS AT ARC MAHIPALPUR (RESTRICTED AREA) UNDER GE (SOUTH WEST) NEW DELHI-03

Amount

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brick work with sub-class B brick straight or curved on plan built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including floor finishes and removal from site complete all as specified and as directed.

M&L for applying 20mm thick plastering in cement mortar 1:4 mixed with the water proofing compound as in sunken floors complete all as specified and as directed. Note: Water proofing Compound shall be measured and paid for separately as "Supply Only".

Supply only liquid water waterproofing compound complete all as specified and as directed.

M&L for 40 mm thick cement concrete 1:2:4 type B1 (using 20mm graded aggregates) in floors complete all as specified and as directed.

Taking down cement plaster including wall tiling, raking out joints, hacking for key, scrubbing down with water, etc. and removing rubbish off the premises complete all as specified and as directed.

M&L for Digital printed wall tiles of size 300mm X 450mm x 7mm thick as in vertical surfaces set and jointed in neat cement slurry with spacers and pointed in epoxy tile grout to match the shade over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for and 7 to 8 mm thick, coloured, digital printed, ceramic. non skid tiles, area of tiles exceeding 0.06 Sqm but not exceeding 0.18 Sqm, laid in floors with spacers, set and jointed in neat cement pointed in epoxy tile grout to match the shade over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc and including removal of rubbish out side the premises complete all as specified & directed.

M&L for Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work ex 5cm but n exc 10cm wide complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:1 1/2:3 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for 18mm thick Dark Shade Granite Stone Slab (of any type) work (table rubbed and polished) in plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20mm thick screed bed in CM (1:6) and rounding off/curving the edges of granite stone & polishing complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, including removal from site complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections, including removal from site complete all as specified and as directed.

S&F Supplying and laying of CPVC pipes SDR 11 & Plain or brass threaded CPVC SDR 11 fittings external dia 20mm, like socket, elbow including necessary cutting and screwing of plumbing fittings with CP extension pieces if required, for concealed work and clamping complete all as specified and directed.

All as per item No 19 here in before but outer dia of CPVC pipe 25 mm complete all as specified and directed.

M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing/ cutting in cement mortar 1 : 3, exc 10 cm but not exc 20 cm in girth, in brick walls etc complete all as specified and as directed.

S&F in repair white vitreous china battery based infrared sensor operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & directed. Make : Jaquar Cat No URS-WHT-13255 & SNR-CHR-51097 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair vitreous china urinals half stall type white including connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screws and PVC rawal plug and making good the surface by white cement to match the wall shade complete all as specified and as directed. Make- Hindware / Parry ware / Cera

S&F in repair 12mm thick frosted toughened glass as in urinal partition fixed with stainless steel brackets & clamps complete all as specified and as directed.

S&F in repair senser based hand drier having Stainless steel finish fixed in position complete all as specified & directed. Make : Jaquar Cat No.: HDR-SAP-M99ACS or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair Floor mounted Two Piece Closet 'S' Trap Square with Soft Close Seat Cover, Twin Flush Fitting and Fixing Accessories And Accessories Set, Size: 475 x 340 x 750 mm, complete all as specified & directed. Make : Prayag Cat Part No : 4129 or equivalent model of CERA/KEROVIT (Kajaria)

S&F in repair oval type wash basin ivory size 460 x 310 x 220 mm excluding taps, waste chain and plug and porcelain stopper and 32mm Waste coupling of brass (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms incl waste pipe complete all as specified and as directed. Make : Prayag Cat Part No : 4793 or equivalent model of Hindware/CERA

S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed of size 15mm, complete all as specified and as directed.

S&F in repair 32 mm bore full thread waste coupling brass chromium plated for vitreous china sink, vitreous china WHB, vitreous china urinals, steel sinks etc with long screwed shanks and fly nuts complete all as specified and as directed.

S&F in repair 32mm bore brass chromium plated bottle trap for wash hand basin, sinks, urinals, etc with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and as directed.

S&F in repair 600mm long PVC connection with CP brass nuts & PVC/ rubber washer suitable for 15mm bore tap / pipes complete all as specified and directed.

S&F in repair chromium plated ABS body health faucet with 1m long flexible tube in CP finish & wall hook for EWC complete all as specified and as directed.

S&F in repair 15 mm bore, two in one bib Tap, brass chromium plated, with elegant knob, screwed down, high pressure including CP cap complete all as specified and as directed.

S&F in repair stainless steel toilet paper holder with Flap recessed type complete all as specified & directed. Make : Prayag Cat No. : BA-08 or equivalent model of CERA/KEROVIT (Kajaria)

S&F soap dispenser with glass bottle complete all as specified & directed. Make : Prayag Cat No.: BA-33 or equivalent model of CERA/KEROVIT (Kajaria)

S&F in repair 15mm bore sensotronic sensor faucet for Wash basin with 175mm extension body complete all as specified & directed. Make : Jaquar Cat No.:SNR-CHR-51021A or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair SS finish paper towel dispenser of capacity 400-600 C/Z towels complete all as specified & directed. Make : Jaquar Cat No.: PTD-SAP-DT0106CS or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair 15mm bore CP brass Angular stop cock with wall flange complete all as specified & directed. Make : Jaquar Cat No.: ALI-85053 or equivalent model of GROHE/KEROVIT (Kajaria)

Taking down chowkhat with shutter without taking off shutters of any description area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat with shutter without taking off shutters of any description area not exc 1.5 Sqm each complete all as specified and directed.

S&F plain, solid, straight chowkhat & frame with 2nd class hardwood, framed, wrought, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick flush shutter solid core construction with block board core and plywood face panels with decorative face veneers both faces with 3 mm thick teak wood lipping on all edges complete all as specified and directed.

S&F 125 mm Brass polished butt hinges type B12 complete all as specified and directed.

S&F Extruded brass handle 150mm,fabricated type polished complete all as specified and as directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size brass door stopper complete all as specified and as directed.

S&F in repair brass mortice lock 65 mm 6 lever vertical type with duplicate key and handle set complete all as specified.

S&F in repair door closer hydraulically regulated, designation No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 Kg each aluminium die cast body all as specified.

S&F powder coated aluminium window/ventilator using 63mm X 38mm X 1.6mm chowkhats with 45mm X 45mm X 1.6mm openable section as in shutter including 5.5mm thick glass panes of approved make with rubber for fixing glass and including builder hardware such as aluminium handles 100mm - 02 Nos, tower bolts 100mm 02 Nos, hooks and eye - 02 Nos 150mm, butt hinges 100mm 04 Nos etc complete all as specified and directed.

S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing in SSR Part II 2020 complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F 100 mm long Butt hinges, medium weight, stainless steel fixed to Chowkats complete all as specified and directed.

S&F Aluminium Handle 100 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

Taking down eaves gutters, rain water or PVC sewage pipe (any size or pattern) including all fittings including cleaning for re-fixing or removal from site (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.

S&F in repair PVC (SWR) floor traps 75mm dia of out let with CP grating including jointing to pipe with solvent cement or adhesive fixed in PCC 1:2:4 type B-1 complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solvent cement or adhesive laid in trenches or in floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solvant cement or adhesive laid in trenches or in floor complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solvant cement or adhesive fixed to walls with PVC clamp complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solvant cement or adhesive fixed to walls with PVC clamps complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius with oval access door including fixed to pipe with solvant cement or adhesive complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with oval access door including fixed to pipe with solvant cement or adhesive complete all as specified and directed.

S&F 110 mm bore PVC (SWR) plain bends any radius including fixed to pipe with solvant cement or adhesive complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) plain bends any radius including fixed to pipe with solvant cement or adhesive complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) branch pieces single, equal or unequal provided with oval access door and jointing to pipe with solvant cement or adhesive complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch pieces single, equal or unequal provided with oval access door and jointing to pipe with solvant cement or adhesive complete all as specified and as directed.

S&F in repair 32 mm bore PVC (SWR) pipe single socketed in any length with rubber ring jointing with solvant cement or adhesive laid in floor or fixed to walls or in trenches complete all as specified and directed.

S&F as in repair 6mm thick designer bevelled edge looking mirror including SS brackets/stud of approved shape & size complete all as specified and directed.

M&L for chipping of spelled/loose concrete of RCC columns, beams, slabs etc and the like as directed, roughening and cleaning concrete surface with steel wire brushes washed with water and allowed to dry including de-rusting of corroded reinforcement by using antirust chemical SIKA RUSTOFF of SIKA or equivalent of Fosroc as approved by GE and then applying Zinc rich epoxy primer over exposed old reinforcement of Fosroc or Sika or equivalent as approved by GE and then applying 30mm thick (avg thickness) polymer modified one component repair mortar SIKA TOP-122HS or equivalent of Fosroc over the steel welded mesh 75mm x 75mm x 3mm & bonding primer SIKADUR 32LP over the exposed surface and surface finished even & fair including necessary steel scaffolding & formwork as required up to 3rd floor of the bldg complete all as specified and directed. Note: Rate for stainless steel welded mesh & water proofing compound shall also deemed to be included in the quoted rate.

Taking down cement plaster on concrete or brick surface of any description etc including taking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on brick / concrete surfaces, finished even &smooth without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:3 on ceiling surfaces finished even & fair without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall/ceiling and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer over 3mm thick wall care Birla putty & sand papering etc complete all as specified.

M&L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/ electric regmal machine washing down with water and applying one coat of wall care putty, sand papering to prepare a even & smooth surface and applying one coat of primer followed by applying two coats of Oil Bound Distemper of any colour complete all as specified and as directed.

All as per item No 75.00 here-in-before but on ceiling complete all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, Fan, Socket or power) complete with all fittings such as switches, ceiling roses, pendants, regulators, Sockets etc removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down Ceiling fans/ exhaust fan including electric connection complete all as directed.

M&L in replacement of point wiring for modular switches or normal switches with 2X1.5 sqmm, single core, multi stranded copper conductor PVC insulated unsheathed cable 1100 Volts grade, drawn through concealed rigid non-metalic PVC Conduit with all fittings of suitable size of dia as required at site including cadmium plated screws as per IS and replacement of 3 mm thick phenolic laminated sheet top covers, modular cover plate on and including sunk type CI/steel terminal boxes concealed in wall including 1.5 Sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light/fan point controlled by one switch 5 Amps one way single pole complete all as specified and directed.

All as per item No. 80 above but one three pin 5 Amps socket out let on independent board.

All as per item No. 80 above but , point wiring of copper cable multi stranded 2x2.5 Sqmm size for 15 Amps socket outlet on independent board with 1.5 Sqmm size of earth conductor complete all as specified and directed.

S&F in replacement of Modular switch 1 way 6 A,1 module complete all as specified and directed.

All as per item No. 80 above but concealed type wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps or 16/20 Amp socket and one single core 4 sq mm PVC insulated unsheathed copper cable as earth continuity conductor cable.

S&F in replacement of Modular switch 1 way 16 A, 1 module complete all as specified and directed.

S&F in replacement of Modular socket outlet 6 A, 2/3 pin, combined 2 module complete all as specified and directed.

S&F in replacement of Modular socket outlet 16 A, 2/3 pin, combined 2 module complete all as specified and directed.

S&F in replacement LED SURFACE mounted1X1 ft luminaire fitting LED 15 Watt cast aluminium housing, toughened glass, silicon gasket, 4000K high power LED with lens for uniform distribution pre-wired and electric connection with suitable size of stranded copper flexible PVC insulated wire including clamps and nut bolts for fixing complete all as specified and directed. (Make - Havells Cat No:- PLUTOSURFACE 1X1PLS15WLED840S6WLED857S or equivalent in Philips/ Wipro)

S&F replacement LED surface wall mounted LED light 10w with powdered coated aluminum housing and integrated electronic driver with THD<10%, Havells cat part no LUMILINEBS10WLED865SPCSS or equivalent to BAJAJ/ POLYCAB

Supply and in replacement of exhaust fan 300 sweep dimensions 40.5 cm x 40.5 cm x 22 cm rated voltage 230 V, frequency 50hz, power consumption 70w with bird guard to protect the fan in running condition r.p.m 1400, air deleivery1850 m³/h, noise level (40 - 45) dB complete all as specified.

S&F ceiling rose 2 to 3 terminals 6 Amp and connection complete all as specified.

Supply fixing and testing electric operated horizontal storage type water heater (Geyser) 25 Ltr capacity 230 Volt, AC including nylon braided PVC connection pipe suitable for 96 degree temperature and pipe fitting complete.

Supply and fixing cast brass non return valve 15 mm dia, ISI marked alongwith GI fitting complete.

Singh Associates

Vishal Traders

VINAY ENTERPRISES

JIWAN DASS THAREJA AND SONS

R D ENTERPRISES