Loading…
Loading…
Tender Value
₹4.2 Cr
EMD Value
₹8.3 L
Closing Date
22 May 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ENGG
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria: (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- B-5: Any work consisting of steel fabrication and erection of FOB or Steel / Composite girder Bridges or ROB with steel composite girder or Industrial Shed or PF shelter (steel) or Microwave / HT tower or replacement of steel members / repairs on steel girder Bridges or Steel Sleepers over girder Bridges.
16 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)15% (minus fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e OS/Tenders/Engg/SC Division) as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
SW 1) Provision of Cover over platform at Bhalki-3 bays, Kamalnagar-3 bays, Janwal-3 Bays, Pangaon-3 Bays under ADEN/BIDR sub division in DEN/North-West jurisdiction. SW 2) Provision of Additional COPs at Udgir Railway station under ADEN/BIDR sub division in DEN/North-West jurisdiction.
52_NW_SC_26_OT
52_NW_SC_26_OT
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹8.3 L
22 May 2026
30 Apr 2026
8 May 2026
64 items across 5 schedules · ₹4,86,15,856.32 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 6 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 341 | 700.5 | 2,38,870.5 |
| 7 | All kinds of soil | cum | 573 | 126.8 | 72,656.4 |
| 8 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 114 | 2,123.75 | 2,42,107.5 |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 822 | 392.15 | 3,22,347.3 |
| 10 | Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like | Sqm | 284 | 392.15 | 1,11,370.6 |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 40 | 9,105.95 | 3,64,238 |
| 12 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 6 | 905.05 | 5,430.3 |
| 13 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry with 150 mm to 300 mm thick with Grade -1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). | cum | 21 | 8,333.65 | 1,75,006.65 |
| 14 | Area of slab upto 0.50 sqm | Sqm | 63 | 5,413.5 | 3,41,050.5 |
| 15 | Area of slab over 0.50 sqm | Sqm | 219 | 5,136.3 | 11,24,849.7 |
| 16 | Light shade pigment using white cement | Sqm | 34 | 1,402 | 47,668 |
| 17 | Medium shade pigment using 50% white cement 50% Grey cement | Sqm | 384 | 1,328.35 | 5,10,086.4 |
| 18 | 25 mm thick | Sqm | 300 | 1,948.25 | 5,84,475 |
| 19 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 86 | 4,481.3 | 3,85,391.8 |
| 20 | 75 mm diameter | Metre | 306 | 248.8 | 76,132.8 |
| 21 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 4488.5 | 738.65 | 33,15,430.53 |
| 22 | Ridges plain (500 - 600mm) | Metre | 304 | 532.35 | 1,61,834.4 |
| 23 | 1:6 (1 cement: 6 coarse sand) | Sqm | 264 | 395.35 | 1,04,372.4 |
| 24 | On concrete work | Sqm | 630 | 235.15 | 1,48,144.5 |
| 25 | Two or more coats on new work | Sqm | 3340 | 146.8 | 4,90,312 |
| 26 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 100 | 2,434.25 | 2,43,425 |
| 27 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 499 | 266.45 | 1,32,958.55 |
| 28 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 1330 | 263.95 | 3,51,053.5 |
| 29 | 25 mm dia nominal bore | Metre | 170 | 551.7 | 93,789 |
| 30 | 50 to 80 mm nominal bore | Each | 212 | 1,785.35 | 3,78,494.2 |
| 31 | 25 mm nominal bore | Each | 61 | 622.4 | 37,966.4 |
| 32 | 15 mm nominal bore | Each | 40 | 97.75 | 3,910 |
| 33 | Up to 300 mm dia | Quintal | 10 | 6,352.4 | 63,524 |
| 34 | 100 mm dia pipe | Metre | 190 | 1,423.1 | 2,70,389 |
| 35 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms | Each | 68 | 112.8 | 7,670.4 |
| 36 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 38 | 2,802.15 | 1,06,481.7 |
| Schedule total | ₹1,09,53,375.23 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Mastertenderbooklet2ason26.03.2026.pdf
ATTACHMENT
Mastertenderbooklet1ason26.03.2026.pdf
ATTACHMENT
special conditions
ATTACHMENT
SCOPEofCOP.pdf
ATTACHMENT
TENDERSCHEDULE.pdf
ATTACHMENT
MasterDocumentforSpecialConditionsforcontractsforCivil-Buildingworks-Correctedon10.03.2026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .