Construction of Work Shop Building at ITI Leh.

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, in cluding getting out excavated earth and disposal of surplus excavated earth as directed , within a lead of 50 metres: All kinds of soil

Dumping od stone including cost of stone

Providing and laying in position ceme nt concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying damp proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg regate 20 mm nominal size) and curing complete

Centering and shuttering including strutting, propping etc. and removal of form work for: a) Foundations, footings, bases for columns

b)Lintel, beams, plinth beams, girders, bressumers and cantilevers

c)Columns, pillars, piers, abutments, posts and struts

d)Suspended floors, roofs, landings, balconies and access platforms

e)Edges of slabs and breaks in floors and walls

f)Stairs (excluding landings) except spiral staircases.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of center ing shuttering, finishing and reinforcemen 1:1:5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete aboveplinth level Thermo -Mechanically Treated bars of grade Fe- 500D or more.

Providing and laying stablized mud block wall having two leaves interlocked with ties at 900mm Horizontally and 450mm Vertically, leaving air cavity of 3" between two wall leaves.

12mm Cement plaster of mix:( in fine sand) 1 : 4 ( 1 cement : 4 coarse sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) 25 mm thick

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required le ngth and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approv ed texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre painted with polyester paint, all complete for all heights asperspecifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit

Cement concrete flooring 1:2:4 (1cement:2 coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm nominal size stone aggregate.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Ramp and stairs - precast chequred cement tiles 22mm thick medium shade using 50% white cement ordinary cement

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood

Providing and fixing UPVC Window with casement/ casement cum fixed glazed with DGU (Double Glazed unit) All complete job

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embe ddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing ISI marked oxidized M.S handles conforming to IS: 4992 with necessary screw etc. complete

Providing and fixing ISI marked oxidized M.S tower bolt black finish,(Barrel type) with necessary screws etc complete

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, b ottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipesconforming to IS: 15801, UV stabilized and anti -microbial fusion welded, having thermal stability for hot and cold water supply including all PP -R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer -in- charge PN -16 pipe, 40mm OD (SDR- 7.4)

PN-16 pipe , 32mm OD (SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings. This includes testing of joints complete as per direction of Engieer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD(SDR-7.4)

Providing and fixing PPR Unions a) PPR Union 40mm

b)PPR Union 32mm

b)PPR Union 25mm

Providing and fixing PPR Socket a) 40x32 MM Socket

b) PPR 25 MM Socket

c) 32 MM Socket

d) 32x25 MM Socket

e) PPR 40 MM Socket

f) 40x25 Socket

Providing and fixing PPR Elbow a)PPR Elbow 25MM

b) 25x1/2 MM F/T/Elbow

c) PPR Elbow 32 MM

d) PPR Elbow 40 MM

Providing and fixing PPR Tee a)PPR Tee 25 MM

b) 25x1/2 MM F/T/Tee

c) PPR T33 32 MM

d) 32x25 MM R TEE

e) PPR Tee 40 MM

f) 40x25 MM R Tee

Providing and fixing Ball Valve a)PPR 25 mm ball valve

b) PPR 32 MM Ball Valve

c) PPR 40 MM Ball Valve

1/2 Inch Plug

25 MM End Cap

Providing and fixing Cross over a)25 MM Crossover

b)32 MM Crossover

Providing and fixing Adapter a)25x1/2 MM M/T/ADAPTER

b) 25x1/2 MM F/T/ADAPTER

Providing and fixing white viterous china pedestal type water closet (European type) with seat and lid, 10 litre low level CP flush with fittings CI/MS bracket 40mm bend diameter flush bend overflow arrangement with mosquito type coupling complete incl. painting of fittings and brackets, cutting and making good the wall and floors wherever req. WC pan with ISI marked white solid plastic seat and lid. with white viterous china flushing cistrn & CP flush bend.

Providing, Fixing, testing & commissioning first quality white vitreous china wall mounted washbasin with 32 mm CP brass waste and CP brass cast bottle trap and pipe to wall with CP brass flange and rubber adopter for waste connection complete including filling gap between counter and wash basin with approved type poly sulphide sealant, cutting and making good the walls wherever required as per manufacturer recommendation.

Supply, Installation, testig & commissioning of CP finish Health Faucet with regulator (angle valve) of approved quality with CP braided flexible pipe 1 m long, wall hooked complete as per manufacturer recommendation.

Supply, Installation, testig & commissioning Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and FT.

Supply, Installation, testig & commissioning C.P. Brass angle valve with wall flange of approved quality conforming to IS: 8931 complete as per approved specifications.

Supply, Installation, testig & commissioning of CP Toilet paper roll holder with all accessories as required and making good the walls wherever required.

Providing & fixing white vitreous china large flat back urinal and sensor battery based infrared sensor operated urinal having pre & post flushing with water (250 ml & 500 ml consumption), having wter inlet from back side, infrared sensor with necessary concealed box and cover with cells, in-built solenoid value, suitable brackets complete as per manufactures speification and director of Engineer-in-charge

Supplying and intasllation, testing and commesioning C.P brass two way bib tap with flange of approved quality conforming to IS:8931 with all acccessories as per approved specification and making good the walls wherever required

Providing and fixing of 5000lts X2 Capacity PVC Water Tanks (Triple layer) of isi mark/iso 9001

Providing and fixing PVC soil waste and vent pipes 100mm dia

75mm dia

Providing and fixing plain bend of reg. degree 100mm dia

75mm dia

Providing and fixing double equal junction of required degree acess door with fitting complete job PVC 100mm dia

75mm dia

Providing and fixing PVC collar of req. dia complete job 100mm dia

75mm dia

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.

Providing and fixing Wooden Shingstak All complete job

20mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand

Carriage of material by M.T Including loadong, unloading and stacking all complete job a)Cement and steel an avg lead 05 km

b)Stone an avg lead 05 km

c)Sand and coarse agg. 05 km

M/S MUNEER HASSAN AKHON

M/S RIGZEN WANGTAK