Revised DNIT for Construction of RCC Box Type Master Strom water Drain and Pumping Station in Sector 112-115 Gurugram including 5 years O and M and 1 year defect liability period

Amount

Supplying of LT Armored Cable 2 no of size 300 sqm 3.5 core 1100 volt complete with making necessary connection of cable on both ends including loading unloading and carriage with all labor and petty material required to complete the job upto teenier satisfaction of Engineer-in-charge of the work.(From 2 No 400 KVA Transformer to LT Panel Double Circuit) Make:-Hevells/Finolex

Supply of LT Armored Cable of size 70 sqmm 3.5 core 1100 volt and complete with making necessary connection of cable on both ends including loading Unloading and carrier with all labor and petty material required to complete the job upto the entire satisfaction of engineer - In - Charge of the work. Make:-Hevells/Finolex

Supplying erection, testing of fully automatic electric control panel board in Panel Room consisting of MS sheet of thickness 14gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Main switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of O to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification ,Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in fall respect.1.ATS Panel with Incomer. Make: Kishor, Aqua, CRI, Kirloskar, Crompton Greeve) For150 HP ATS (Air Cooled)

Supplying erection, testing of fully automatic electric control panel board in Panel Room consisting of MS sheet of thickness 14gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Main switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of O to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification ,Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in fall respect.1.ATS Panel with Incomer. Make: Kishor , Aqua, CRI, Kirloskar, Crompton Greeve) For 350HP ATS (Air Cooled)

Providing and fixing wire fencing on the wall 600 mm compete in all respects. As per drawing

providing and fixing of DI sluice valves IVC Nasik/VAG/Kirloskar make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect as per satisfaction of the Engineer-in-Charge 600mm i/d

providing and fixing of DI sluice valves IVC Nasik/VAG/Kirloskar make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect as per satisfaction of the Engineer-in-Charge 500 mm id

Provision for 1 No screen with a clear opening of 20 mm 75 deg the screen shall have all wetted parts of stainless fabricated from steel grade 304 or superior.in Sump Hodi of size 3.00*1.50 complete in all respects.

Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications S 2 no. Culvert At `S` R Culvert At `R`

Comprehensive Operation civil and maintenance of Pumping Station at sector 115 including repair of mechanical, Electrical, and Drainage network from Sect. 112-115.for a period of 1st year During DLP period

Comprehensive Operation civil and maintenance of Pumping Station at sector 115 including repair of mechanical, Electrical, and Drainage network from Sect. 112-115.for a period of 2nd year after DLP period

Comprehensive Operation civil and maintenance of Pumping Station at sector 115 including repair of mechanical, Electrical, and Drainage network from Sect. 112-115.for a period of 3rd year

Comprehensive Operation civil and maintenance of Pumping Station at sector 115 including repair of mechanical, Electrical, and Drainage network from Sect. 112-115.for a period of 4th year

Comprehensive Operation civil and maintenance of Pumping Station at sector 115 including repair of mechanical, Electrical, and Drainage network from Sect. 112-115.for a period of 5th year

Providing, Supplying, erection, testing and commissioning of submersible motor pumping set non clog for sewerage.having head as per the indicated requirements of discharge in LPM and power capacity in BHP. Pumpset with 10 meter cable, including Pump Monitoring Unit(PMU), Automatic built-up water level controller, Autocoupling with Integral Bend (With Autocoupling Pin) plus Foundationbolt: as per IS marked including all accessories and safety devices of standard specifications (like SS Pipes, SS Chain (Shackle Chain), SS Foundation Bolt, complete base frame, Monorail, Chain Guide Line, Auto Compiling, Duct Foot Bend (D/F Bend) etc. complete in all respect 1. Discharge(Q)@duty point(m3/hr)=2635 cum/hr 2.Head(h)@duty point(Meter of water column(mwc)=10 M 3. Guide Rail without Strip-MoC: Gl with Coupler ((@ every 3 mtr), 1 Run, (MoC:SS 410)) 4.Squirrel cage induction. 5.Supply Voltage (V) 415 ( plus /-10%), 6.Supply Condition 48.5Hz ( plus /-3%), 3 Phase AC 7.Motor speed 960/1450 RPM including oil chamber 8.Method of starting (ATS) 9.Motor Thermal Cooling Method By liquid Submergence as per IS specification. Make: KISOR, KSB, CRI, Kirlosker, Crompton Greeve) Model SUITABLE 43900LPM 150BHP 10M head 2635 cum/hr (2W)

`Providing , Supplying, erection, testing and commissioning of submersible motor pumping set non clog for sewerage.having head as per the indicated requirements of discharge in LPM and power capacity in BHP . Pumpset with10 meter cable, including Pump Monitoring Unit( PMU),Automatic built-up water level controller, Autocoupling with Integral Bend (With Autocoupling Pin) plus Foundationbolt: as per IS marked including all accessories and safety devices of standard specifications (like SS Pipes,SS Chain (Shackle Chain) ,SS Foundation Bolt, complete base frame, Monorail,Chain Guide Line, Auto Compiling, Duct Foot Bend (D/F Bend) etc. complete in all respect. 1.Discharge(Q)@duty point(m3/hr)=5270 cum/hr 2.Head(h)@ duty point(Meter of water column(mwc)=10 M 3.Guide Rail without Strip - MoC: GI with Coupler ((@ every 3 mtr), 1 Run, (MoC:SS 410)) 4.Squirrel cage induction. 5.Supply Voltage (V) 415 ( plus /-10%) , 6.Supply Condition 48.5Hz ( plus /-3%) , 3f Phase AC 7.Motor speed 960/1450 RPM including oil chamber 8.Method of starting (ATS) 9.Motor Thermal Cooling Method By liquid Submergence as per IS specification. Make: KISOR,KSB, CRI, Kirlosker, Crompton Greeve)Model SUITABLE `87800 LPM 350 BHP 10 M Head 5270 cum/hr (2W)

CCTV CAMERAS:-Providing and Installing 6 Nos CCTV Cameras at Pumping Station complete as per satisfaction of the Engineer– in- Charge, within 96 hours of signing the Agreement along with 90 days recording (DVR),8MP 3840x2160 Pixels, 32 inch LED Screen, 8 Channel DVR at PS with connectors, cables, poles and power supply with online real-time output facility. The cameras shall be synchronized at site. Make: - Sony/ Canon/Panasonic/ Samsung CCTV Cameras should be installed and ommissioned .

Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications

Providing and laying 50mm - 75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications

Supply, installation, commissioning of Parshall flume confirming to IS 14371: 1996 and amendment (if any) for accurate measurement of water flowing through open channels with prefabricated fiberglass lining, moulded engraved gauge marking in m3/hr or lit/sec and also in centimeter including discharge table, capacity marking, flow direction, hold fasts and sand treatment on backside of the flume including all required civil works, transportation and handling charges etc. during the installation and commissioning complete in all respect. Material: Fiberglass reinforced plastic (FRP) Parshall Flume 4’ for 105.60 MLD at Pumping station sect 115 Dimensions: Throat Width: 1220 mm, Max Width: 1937 mm Height: 1400 mm, Length: 3320 mm Max discharge: 5000m3/hr (inlet channel of 105.60 MLD at Pumping station sect 115 = 1 No.)

Supplying and installing of Ultrasonic level/Open Channel flow meter/transmitter for high functionality on standard product as open channel flow meter complete with instrument fittings and mounting accessories etc. and One Channel data logger with OMLS data logger with data connectivity to GMDA, HSPCB and CPCB Server complete in all respect to the entire satisfaction of Engineer-in-charge with the following specifications:- i) Type:-Suitable for water applications ii) Open channal of size 3000x1500 mm inlet iii) Outlet 750 mm dia 2 nos iv) Measuring principle:-Ultrasonic type, 2 wire system v) Temperature compensation:-Built -in to compensate over temperature range vi) Measurement:-Continuous level measurement from 0 to 100% of the range vii) Output:-4 – 20 Ma isolated with HART 7 viii) Power Supply:-Nominal 24 V DC viii) Preamplifier:-Included ix) Measurement Range:-0 to 4 Mtr x) Mounting connection:-2” NPT [(Taper), ANSI / ASME B1.20.1] xi) Full Insulation:-Provided xii) Accuracy:- plus /-0.5% of FS xiii) Operating temperature:-Up to 600 C xiv) Material (transducer):-ETFE (Ethylene Tetrafluoroethylene) Make: - Siemens, ABB, Forbes Marshall.

The Structural design and drawing of RCC Drain, Sump well, building work will be submitted by the contractor to the department. dully vetted from Institute of reputed IIT, such as IIT Delhi, IIT Roorkee .The cost will be borne by the contractor. The work will be executed as per design drawing approved by department. The design and Drawing showing Electrical items, Capacity of pumping machinery will be submitted by the contractor after consulting, duly approved and got vetted from Institute of reputed IIT, such as IIT Delhi, IIT Roorkee at their own cost including inspection of pumping machinery at manufacturer site. The contractor shall place any supply order of Electrical/ mechanical/ Machinery etc.with the consulting from Engineer-in-charge.

Providing and fixing of Mild steel Epoxy Painted side wall embadded Open Channel gate with SS304 Rising type spindle type with CIN Hand wheel operated of gate size 5500x2500 mm as per site suitable for 2.2 m Seating water head (From Invert), Flush bottom Closure,Close top frame gate.with Electric Actuator as IS Specification. complete in all respect as per approved make and directions of Engineer-in-charge as per respective size.Make:-Jash/Indian Valve Company(Nasik)

Providing and fixing of Mild steel Epoxy Painted side wall embadded Open Channel gate with SS304 Rising type spindle type with CIN Hand wheel operated of gate size 3000x2500 mm as per site suitable for 2.2 m Seating water head (From Invert), Flush bottom Closure,Close top frame gate.with Electric Actuator as IS Specification. complete in all respect as per approved make and directions of Engineer-in-charge as per respective size.Make:-Jash/Indian Valve Company(Nasik)

Providing and fixing of DI sluice valves IVC/VAG/Kirloskar /Jash/Indian Valve Company(Nasik) make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect as per satisfaction of the Engineer-in-Charge

Providing and fixing of DI NRV IVC/VAG/Kirloskar/Jash/Indian Valve Company(Nasik) make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect as per satisfaction of the Engineer-in-Charge

Providing and fixing of DI NRV IVC/VAG/Kirloskar/Jash/Indian Valve Company(Nasik) make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect as per satisfaction of the Engineer-in-Charge 600 mm i/d Class I (1 plus 1)

Bidder Name

Amount

Subhash Infraengineers Pvt. Ltd. (GSTN-06AANCS5001K1ZB) BID ID -1038959

jain construction co. (GSTN-06AAEFJ4717B1ZT) BID ID -1040305

VIDYA PROJECT PVT. LTD. (GSTN-06AAFCV3456M1ZX) BID ID -1043695

YFC Projects Private Limited(GSTN-NA)--1038451

Tomar Construction Company(GSTN-NA)--1042342

M/S SHREE BALAJI BUILDERS(GSTN-NA)--1043740

M/S SHREE BALAJI BUILDERS

VIDYA PROJECT PVT. LTD.

Tomar Construction Company

YFC Projects Private Limited

Subhash Infraengineers Pvt. Ltd.

VIDYA PROJECT PVT. LTD.

Subhash Infraengineers Pvt. Ltd.

YFC Projects Private Limited

Tomar Construction Company

M/S SHREE BALAJI BUILDERS