KMC/MDPS/CP/MSPATH/26-27

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structuralmembers only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m.

Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc.

Welding in M.S. structural work with gas or electric: (b) Continuous weld.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.

(A)Painting with best quality synthetic enamel paint of approved make & brand includiing smoothening surface by sand paper etc. including using of approved putty etc. on the surface, if necessary: (b) on steel or other metal; surface: (iv) 2 coats with any shade except white.

Sub Total

GST 18%

CESS 1%