REPAIRS TO JOINERY, MS GRILL, ROLLING SHUTTER STEEL DOOR AND CERTAIN B/R REPAIR ALLIED WORKS IN OTM/MD ACCN OF DEPOT BN, RECORD OFFICE, CIW, TEO, MD ACCN OF AJIT VIHAR AND OFFR MD ACCN OF BEG AND CENTRE AREA UNDER AGE B/R-II IN GE (C) KHADKI

Amount

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each complete all as specified and as directed.

Description all as per item No 01 above but n.exc. 1.50 sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1.0 sqm and not exc. 2.0 sqm each complete all as specified and as directed.

Taking down steel window / ventilator of any description n exc 1.8 sqm each.

Supply and fixing powder coated aluminium door made out of hollow extruded aluminium section as mentioned below: Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortise lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete all as specified and as directed. Chowkhat Frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm MAKE :- (i) Anodized aluminium section : Jindal/Hindalco, Indalco (ii) Particle board : Novapan, Duratuff (iii) Glass : Saint, Gobain, Modi Guard, TATA

Supply and fix in repairs aluminium extruded section body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one guazed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed. NOTE :- Colour of powder coating should be in dark brown/wood grain in colour.

Supply and fix for powder coated aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed. NOTE :- Colour of powder coating should be in dark brown/wood grain in colour.

Supply and fix for pressed steel door frames of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete all as specified and as directed.

Description all as per item no 09 above but size 125 x 60 mm complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 using 20mm aggregate as in door frame filling/hold fast blocks complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cum. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix factory made 35 mm thick second class hard wood plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressure treated complete all as specified and as directed.

Supply and fix flush shutter solid core 30 mm thick with block board core & ply wood face panels commercial type on both sides complete all as specified and as directed.

Supply and fix factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted with beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified and as directed.

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engr-in-charge.

Description all as per item no.17 above but without glazing bars complete all as specified and as directed by Engr-in-charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Supply and fix in repairs pre-laminated particle board 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl lipping patti complete all as specified and as directed.

Supply and fix anodised aluminium shutters, as in partition, aluminium section weighing not less than 0.55 kg/ m fixed in aluminium chowkhat frame of size 101.60x44.45x1.55 mm including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. complete all as specified and directed.

Supply and fix strucural steel framed work as in doors or gates of angles or other sections with gusset plates, rails bracers etc. complete with fixing /hanging arrangenets as required confirming to Fe 290 gde E 165 all as directed.

Supply and fix mild steel plain black sheet in steel gates and similar work 1.60mm thick cut to size, holes punched: including round headed screws, clout nails or rivetes and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles, etc as required and as directed by Engr-in-Charge.

Taking down old rolling shutter and refixing the rolling shutter in same position , after repairs to necessary parts like 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 lever, 3 nos of ball bearing and MS handles including all necessary greasing & easing, replacement of unserviceable parts incl one coat of synthetic enamel paint over a coat of primer NOTE :- Parts replaced shall be measured and paid seperately)

Supply only MS steel sheet 1.0mm thick (For shutter corrugated.)

Supply only spring suitable for rolling shutter

Supply only MS safety lever locks with 4 levers for rolling shutter

Supply only ball bearing for rolling shutter

Supply only MS handles 150mm in size for rolling shutter

Supply and fix in repairs butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed.

Description all as per item no 30 above but stainless steel butt hinges 100mm long

Supply and fix 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix for extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and as directed.

Supply and fix for 30mm long stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fix for 200mm long stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fix flat iron 25x3mm thick conforming to Fe-290, Gde E-165 as in holdfasts complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of redoxide primer on newly steel surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

Material and labour for framed work such as grills etc with ends of bar shouldered or revetted or forged into spikes framed guard bars including framed flat iron of any size and section to combine the windows complete all as specified and as directed by Engineer-in-Charge.

Supply and fix small fittings such as brackets of any type latch and hinges block shaped doors and window stops and like including all necessary labour article n. exc. 200 Cu cm each of 2nd class hard wood including 50mm butt hinges medium wt cold rolled MS complete all as specified and as directed by Engineer-in-Charge.

Cutting holes in brick/block /stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts or lugs measured from the face of the jamb into wall exc half brick but not exc one brick complete all as specified and as directed.

Supply and fix in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Description all as per item no 47 above but of anodised aluminium alloy

Supply and fix in repair Brass knobs 35-40 mm dia complete all as specified and as directed.

Supply and fix 250mm, size ordinary rat tail rod pattern spring incl roller and roller plate complete all as specified and as directed.

Supply and fix plywood, grade BWP, 12mm thick, type BB fixed with screws to timber frame work complete all as specified and as directed.

Material and labour for steel rolling shutters, thickness of laths in 1.00mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, including taking of existing rolling shutter and taking to store, complete all as specified and as directed.

Description all as per item no 52 here in before but as in gear operated type with bevel gear box and crank handle complete all as specified and as directed.

Supply and fix for ready made pulley operated clothes drying system of 8ft including 4 Nos of anodized Aluminium pipes of 2.70 RM long each each of outer dia 22mm and inner dia 19.8mm channel assembly . Pulleys made up of Delrin with rope guide mounted on channel pair of length 24"(distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self taping screws provided in kit. Rope will be polyster braided undyed of 4mm dia. MAKE :- Easy dry system/Equivalent make as approved by CE Southern Command Pune

Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief complete all as specified and directed.

Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and as directed.

Material and labour for precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed.

Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc complete all as specified and as directed.

Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour rendering 15 mm thick in cement mortar (1:6) on fair faces of block masonry surfaces or fair faces of brick work complete all as specified and directed.

Material and labour for preperation new plastered surface of wall and applying two coats of distemper oil emulsion(OBD) over a coat of primer on wall surfaces complete all as specified and as directed.

Material and labour for preparing new plastered surfaces and applying two coat of cement based paint (any tint) over a coat of primer on walls complete all as specified and directed.

Material and labour wall paper-Wall coverings fixed in repairs made from vinyl (PVF), coated with plastic; rustic metalic/ natural finish/ cork & mica finish/ wall texture finish; colour fast and washable with dust repellent property. as per approved sample including surface preparation and application all as per manufacturers standards. complete all as specified and as directed.

Material and labour for PLEATED pleased blinds fixed in repairs made out of polyester fabric with aluminium coating at its back. Pleats of one inch with segments at the interval of not exc 100mm top and bottom channels made of aluminium in matching colors, cord lock and pulleys made of brass. design and type as approved by GE complete all as specified and as directed.

Supply and fix PVC interlocking wall panelling 5mm to 7mm thick of surface finish with natural wooden finish (in minimum size 1200mm hight x 300mm wide). Panel is to be fixed on framework with screws as in horizontal or vertical alignment to walls at every 750mm with centre & edge bracket in tongue & groove system on framework. if required the cavity of framework should be inserted with rock wool with 48 kg and 50mm density, along with all accessories including required flashing, U shape groove complete all in repairs, Make and sample as approved all as specified and directed.

Supply and fix in repair for powder coated aluminium sliding windows having FOUR Nos of tracks including two guazed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.

JP ENTERPRISES (BID ID -3064885)

MAHESH DADAJI BACHHAV (BID ID -3064592)

SAMBHAJI D JARANDE (BID ID -3066697)

DARSHAN ENTERPRISES (BID ID -3074590)

Shri Sant Cosntruction (BID ID -3066311)

S.R.M.K Enterprises (BID ID -3074764)