Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.3 LAccepted-AOC 220 GANPATI ENCLAVE DABWALI ROAD BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹48.4 L+₹74,664 (1.57%)Rejected-Finance | L2 | Rejected-Finance Quoted other than lowest rate. | |
| 3 | L3₹48.8 L+₹1.1 L (2.36%)Rejected-Finance | L3 | Rejected-Finance Quoted other than lowest rate. | |
| 4 | L4₹48.8 L+₹1.1 L (2.41%)Rejected-Finance | L4 | Rejected-Finance Quoted other than lowest rate. | |
| 5 | L6₹49.0 L+₹1.3 L (2.77%)Rejected-Finance | L6 | Rejected-Finance Quoted other than lowest rate. |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
8 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SH ASHOK KUMAR, EE, IDSE
GE (N) Bathinda
REPAIR TO JOINERY IN OTM ACCN ZONE B SOUTH SIDE OF VIKRAM BATRA MARG UNDER AGE BR-III OF GE (N) BATHINDA AT BATHINDA MIL STN
2024_MES_660006_1
8939/NIT-26/24-25
Open Tender
Civil Works
Item Rate
270 days
BATHINDA
Class D category a(i)
8 documents required · 8 mandatory
₹500
GE NORTH BATHINDA
₹98,000
Yes
1 Oct 2024
15 Jun 2024
10 Jul 2024
15 Jun 2024
8 Jul 2024
1 Jul 2024
15 Jun 2024 - 22 Jun 2024
Amount
Taking down chowkhats or frame with shutter (door/window/ventilator etc. )(without taking off shutter from the frame) n.exc 1.5 Sqm each and removal from site complete all as specified & directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each and removal from site complete all as specified & directed.
Taking down shutters of any description n.exc 1 Sqm each and removal from site complete all as specified & directed.
Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each and removal from site complete all as specified & directed.
Resecuring and easing & adjusting without taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including all fittings complete all as specified & directed.
Supply and fixing factory made pressed steel frames for doors with one or more rebate including necessary fioxing lugs, hinges, lock strike plate, etc size of frame 105x60mm complete and making wall even finish with plaster complete all as specified & directed. (thickness of sheet shall be 1.25mm).
Supply and fixing factory made pressed steel frames for doors with one or more rebate including necessary fioxing lugs, hinges, lock strike plate, etc size of frame 125x60mm complete and making wall even finish with plaster complete all as specified & directed. (thickness of sheet shall be 1.25mm).
Material and labour cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks and like etc complete all as specified and as directed.
Supply and fixing Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.
Supply and fixing Solid PVC door frame of size 50 mmx 47mm made out of 5 mm wood grain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.
Supply and fixing factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded prelam woodgrain colour PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specifed and directed.
Material and labour for 35 mm thick IInd class HW rail & style factory made plain framed pannelled door shutter (two pannel) with lock rail & pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fixing for 35 mm thick IInd class HW glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars ), edges of framing plain, chamfered or rounded. complete all as specified and directed.
Supply and fixing factory made 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge
Supply and fixing steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and as directed.
Supply and fixing steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete including lugs without glazing bars, dovetailed or welded complete all as specified and as directed.
Supply and fixing Steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and as directed.
Material and labour framed work such as grills, gratings, gate, holdfast etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples fixed complete all as specified and directed.
Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed in steel window with mild steel patti by welding/ riveting/bolting fixed complete including taking down old wire cloth complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pin/springs clips and providing and fixing new ones, all as specified and directed.
Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in square of any size if any complete all as specified and directed.
Supply and fixing 3 mm thick sheet glass frosted and glazing with oil putty in square of any size if any complete all as specified and directed.
Material and labour preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Material and labour preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
Supply and fixing 100 mm mild steel butt hinges medium weight,cold rolled welded/riveted complete all as specified and directed.
Supply and fixing 125 mm mild steel handles, oval type anodised complete all as specified and directed.
Supply and fixing 200 mm mild steel barrel tower bolts stove enamelled black and fixed complete all as specified and directed.
Supply and fixing 300mm long mild steel sliding door bolt splate type, stove enamelled black, with bright bolt not less than 12mm dia complete all as specified and as directed.
Supply and fixing mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate fixing by welding or riveting complete all as specified and directed.
Supply and fixing 125 mm Aluminium handles, cast type, anodised complete all as specified and directed.
Supply and fixing 150 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.
Supply and fixing floor door Stopper (75mm overall length of cover plate) aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed
Supply and fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
Material and labour for anodised aluminium as in Doors, windows,ventilators,partitions, shutters and frames,with or without sash bar, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Eng- In-Charge.
Material and labour for anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading ,anodised aluminium fittings such as , hinges, suitable handle (2 Nos.), 200mm tower bolt-01 Nos in each shutter complete all as specified. Note: Rate for fittings included in the unit quoted rate.
Material and labour for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), 150mm tower bolt-01 Nos in each shutter complete all as specified Note: Rate for fittings included in the unit quoted rate.
Supply and fixing powder coated aluminium (Minimum thickness of powder coating 50 micron) as in Doors, windows,ventilators,partitions, shutters and frames,with or without sash bar, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Eng- In-Charge.
Supply and fixed powder coated aluminium door shutters (Minimum thickness of powder coating 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium fittings such as , hinges, suitable handle (2 Nos.), 200mm tower bolt-01 Nos in each shutter, aluminium snap beading, screws etc complete all as specified and directed by Engr- In-Charge. Note: Rate for fittings is included in the unit quoted rate.Glass/ACP sheet shall be measured and paid seperately.
Supply & fixing powder coated aluminium window/ventilator fixed type/top hung/side hung without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, and suitable fitting such as handle, hinges, tower bolt, peg stay in each shutter, aluminium snap beading, screws etc., complete all as specified and directed by Engineer-in-Charge Note: Rate for fittings is included in the unit quoted rate.Glass/wire mesh shall be measured and paid seperately.
Material and labour for powder coated aluminium anodised three track sliding windows of frames size 92mm x 31.75mm x 1.5mm thickness and of shutter size 40mm x 18 (with 9mm interlocking legs) x 1.45mm thick, section (two shutter glazed, covering half of span of opening each & one shutter skelton covering more than half of span of opening) including provn for making windows air tight, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45mm nominal dia of wire average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads, mode of measurement complete all as specified and directed by Engineer-in-Charge. Note :- Net openeing will be measured for payment purpose.
Supply and fixing in repair 75mmx75mmx6mm thick aluminium grill fixed with all necessary accessories ie. Channel, screws etc fixing as per manufacturer instruction complete all as specified and directed by Eng-in-Charge.
Supply and fixing in repair Aluminium (extruded section body) door closer hydraulically regualted, designation No 3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
Material and labour in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and as directed.
Supply and fixing Mortice lock brass, 4 levers vertical type fixed to any type of door etc compete all as specified and as directed
Material and labour 4mm thick aluminium composite panel of polyethylene core 0.5mm thick each face any colour as directed, fixing as per manufacturer instruction complete all as specified and directed by Eng-in-Charge.
Material and labour in repairs 18/19mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/nails as in CB shutter,shelves, kitchen cabinet, study table, book shelf and like including teak wood leaping alround and taking down old board complete all as specified and directed by Engr-in-Charge.
Material and labour in repair for Plain filets, square , rectangular or triangular in section clean sawn with nails or brads of 2nd class soft wood as in cabinet frame area exceeding 6 sqcm and not exc 13 sqcm complete all as specified.
Supply and fixing continuous piano hinges mild steel bright finish or electrogavanised with flaps 30mm ( when open ) wide complete all as specified.
Supply and fixing magnatic catcher fixed with nut/ screw complete all as specified and directed by Engr-in-Charge.
Taking down aluminium door/window shutter area not exc.1 sqm each, repairing the same and make it functional smooth by repair/replacement of defective parts such as rubber gasket, snap beading, pivot and tighten the shutter from joints and refixing the shutter in same or other opening after repairing complete all as specified and directed by Engr-In-Charge.
Taking down aluminium door/window shutter area exc 1 sqm but not exc 2 sqm each, repairing the same and make it functional smooth by repair/ replacement of defective parts such as rubber gasket, snap beading, pivot and tighten the shutter from joints and refixing the shutter in same or other opening after repairing complete all as specified and directed by Engr-In-Charge.
Taking down rolling shutter of any size , Material and labour for straightening of certain members, guide channels, making good edges, repairing of hood cover, oiling, greasing to shaft/gear box to make it functional smooth including repairing by necessary welding and reviting/ replacement of defective parts as required like steel spring/shaft/lock plate/curtain interlocking curl etc. after repair/replacement of parts as satisfaction of Engineer-in-charge refixing the shutter in original position including necessary PCC , brickwork, plastering, painting, distempering etc to matching the surface with existing surface complete all as specified and as directed by Engr-in-Charge. Note: - Spare parts as per requirement shall be measured and paid seperately under appropriate item of this schedule as supply only. Cost of labour for replacing the parts shall be included in the unit rate.
Supply only for safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engr-In-Charge.
Supply only for Ball bearing for rolling shutters complete all as specified and directed by Engr-In-Charge.
Material and labour for welding in repairs n exc 2.5cm in length and n exc 6mm in thickness all as specified and directed.
Taking down cement plaster includiing raking out joints hacking for key and scrubbing down with water complete, all as specified and directed by Engiiner-in-Charge
Material and labour rendering 15mm thick on interenal surface in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge..
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed by Engineer-in- charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.
Material and labour for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450X350X7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.
Material and labour for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18Sqm, in skirting including 10mm thick plaster in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Gl powder coated frame work 605 mm X 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 600mmx600mmx6-7mm thick board in false ceiling with aluminium profile sheet on top side and PVC profile sheet on bottom side fixed in grid as per manufacturer specification and directed by Engineer-In-Charge.
Supply and fixing hollow PVC Lining consisting 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair mild steel with PVC coating(ABS) pipe 25mm dia curtain rod , wall thickness of pipe not less than 20 guage, as curtain rod fixing with and including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engineer-in- charge.
Supply and fixing for IInd class hard wood plain, solid, straight chowkats and frames, wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and directed.
Material and labour preparation of new or previously treated/untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of varnishing over one filler coat complete all as specified and as directed.
FAQIR CHAND
R K GOYAL & COMPANY
ABHINANDAN ENTERPRISES
MODERN ENTERPRISES
K L JINDAL AND CO.
Singla Enterprises
M/s Goyal Builders
M/s DHEERAJ JAIN CONSTRUCTION COMPANY
SHARDA ENTERPRIES
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .