SPECIAL REPAIR TO ROAD FROM TURNING OF PUTTI PADAR VILLAGE TO VIJAY DWAR AT GMS UNDER GE I GOS

Amount

Excavation in trenches n.exc 1.5M wide n.exc 1.5M depth for foundation etc or for shafts, wells cesspits manholes pier holes etc n.exc 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm using excavated soil complete all as specified and directed.

Removing surplus earth to a distance n.exc 50m and depositing where directed at al levell n.exc 1.5M above the starting point complete all as specified and directed.

M & L P:C:C 1:4:8 Type D2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for flyash brick work in cement mortar 1:4 with sub class `B’ bricks straight or curved on plan exc 6m mean radius with old size bricks all as specified or shown on drgs (for manhole etc).

M&L Cement concrete 1:3:6 type C-2 using 40mm graded aggregate as in surface channels incl necessary form work complete all as specified and directed.

M&L for 15mm thick rendering on brick work in cement mortar 1:4 using water proofing compound @ 3% by wt of cement incl finishing the surface even and smooth w/o using extra cement., complete all as specified and directed ( WPC measured and paid seprately).

M&L for 10 mm thick rendering on brick work in cement mortar 1:4 using water proofing compound @ 3% by wt of cement without finishing the surface even and smooth (WPC measured and paid seprately)

Supply only integral water proofing compound complete all as specified and directed.

PCC 1:2:4 type B1 as in coping laid to slope and finished even and smooth complete without using extra cement including necessary form work, complete all as specified and directed.

Extra For forming fair finishes channel 30cm inner girth in cement concrete using extra cement, including moulds mitred stopped ends etc complete all as specified and directed.

M&L for RCC M-25 (20mm graded, aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs and mass concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming.

M&L for coloured Glazed ceramic tiles (200x200mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

M&L for coloured Glazed ceramic tiles (200x200mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

M&L for Screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes

M&L Cast iron rainwater socketed pipes 100 mm dia with cement joints and with ears

M&L for 100 mm dia bends or elbows, square or obtuse

M&L for 100 mm dia mild steel sheet eaves gutters of 1 mm thick sheet, galvanised class 3, half round with rounded edges

M&L for Sand filling under floors or in foundations including watering and consolidation

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

M&L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, and making good by applying tack coat @ 5 Kgs per 10 Sqm and laying premixed bituminious macadam well rammed and sealed with paving bitumen 60/70 or VG-30 grade@ 9.8 Kgs per 10 Sqm, blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 10 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed.

M&L for Preparing existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/concrete surfaces than applying evenly priming tack coat with paving bitumen 60/70 or VG-30 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen 60/70 or VG-30 grade by weight of total mix including cement filler, on surfaces rolled & compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed.

M&L for premixed bituminous macadam laid, rolled and compacted to required gradient and camber n.exc 75mm thickness (consolidated thickness) with 4% binder content of VG -30 by weight of total mix, mixed in hot mix plant and laid by mechnical paver finished complete all as specified and directed.

M&L for 75 mm thick spread thickness Moorum/Red Bajri spread, rolled & consolidated to required gradient & camber complete all as specified and directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 1.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed. Note: MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

S&F in repair cat eyes/road studs for roadways sign permanent surface mounted type having tough poly carbonate micro replicated corner cube reflector lenses with a protective abrssion resistant ceramor coating having body of weather proof and impect resistant thermoplasit complete as per manufacturer,s instruction and complete all as specified and directed. (Colour: Yellow/Red/Amber) Make: Series 290 of 3M or Road Star or Equivalent of higher cost.

S&F in repair solar cat eyes/road studs size (mm) 125L x 125B x 25H including stem height 53mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weatherproof coating visible distance upto 400mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8Hz including solar panel 3.5V/110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction complete all as specified and directed. Make: 3M/Avery Dennision/Dark Eye/Green/Greenlite/Road Star Cat Part No. GSR-909 or Equivalent of higher cost.

S&F in repair ABS Body, 100 cm outdoor convex mirror good quality as approved by GE fixed in road/ground portion complete including hanging/fixing arrangement with adequate mounting arrangement at suitable height, having unbreakable Polycarbonate Convex Lens with hoods as the traffic safety mirror for eliminating blind spots & increase visibility at a broader angle, including excavation for post holes, PCC Type C-2 1:3:6 (using 40 mm graded stone aggregate) in post hole & removal of surplus excavated material to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point. Complete all as specified & directed. Make: Frontier 100 cm outdoor Convex Mirror, FMCO-100, Road Star, Real reflectors, Alexix, ACE polymers (India) or Equivalent of higher cost.

Likitha Enterprises

M/s MAA BHAIRABI ENTERPRISES

M/s Bapujee Builders and Traders

M/s Ats Electricals

M/S JAGANNATH SASMAL

M/S SIWALIK AND CO

DHABALESWAR ENGINEERING WORKS

G.KRISHNA MURTHY AND PARTNERS