Re-construction of Jamirah Khanikar Road Ch. 800.00 m to 2360.00 m under SOPD for the Year 2019-20 under PWRD, Dibrugarh, Lahowal, Moran and Tingkhong Territorial Road Division, Dibrugarh - Dibrugarh LAC.

Amount

Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness. i) By Manual Means, B.In area of thorny jungle:-

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads , transporting to site, spreding , grading to required slope and compacted to meet requirement of Table(300-2) with lead upto 1000m as per Technical Specification Clause303.1. (i) Private Land

WBM Gr3 Using crushable screening such as moorum gravel for Gr.III' Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening/binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density grading 3 as per Technical Specification clause 405Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening/binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density grading 3 as per Technical Specification clause 405

Providing and laying interlocking concrete block pavement(M40) having thickness 80mm as per technical specification clause 1504 including carriag. A( Including edge block/edge restraints

Direction and place identification sign more than 0.9sqm size board. Providing and erecting direction and place identification of semi-Reflective sign boardsas per IRC:67 made of 2mm thick M.S. sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message,letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour, supported and welded on two nos 47mmx47mm of 12SWG square tube of 3050 mm hight duly strengthened by 25 mmx5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mmx450mmx600 mm, 600 mm below ground level as per approved drawing and Technical specification Clause 1701

(B)Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm width and required letter and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing clause 1701.2.2. (ii) 600mm equilateral traingle

(iii) 600mm circularr

Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone/ local stone of standard design as per IRC:8, fixing in position including painting and printing etc as per drawing andtechnical specification clause 1702. (ii) Ordinary Kilometre stone

(iii) 200th meter stone (Precast)

Reinforce cement concrete M15 grade boundary pillars/local stone of standerd design as per IRC :25,fixed in position including finishing as per drawing and Technical Specification Clause 1704.

Planting of Trees by the road side (Avenue trees) in 0.60 m dia hole, 1.00 m deep dug in the ground, mixing the soil with decayed farm yard/Sludge mannure, planting the saplings, backfilling the trenches, watering, fixing the tree gaurd and Maintain ing the plants for three years

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

M/S M.B. ENTERPRISE

M/S Archangel Group