Providing of Godrej furniture for HSVP office use complete in all respect as per satisfaction of EIC (A/mtc of PH services in Sector 23 to 28, 31 and 32 and sector 1 to 6, MDC, Panchkula)

Amount

Providing and Placing Mid Back Chair, The seat assembly shall be made up of 1.2 ±0.1cm, thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 64.5 cm (H). The HR polyurethane foam shall be moulded with density =45 plus /-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2` maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be Injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height-min93.5 to max 104.5cm, Width and Depth of Chair as measured from pedestal - Width-76.3 cm and Depth 76.3 cm. The OEM should be having valid ISO 9001:2015, ISO 14001: 2015, ISO 45001:2018 certificates as per NABCB guidlines and BIFMA membership and AIOTA certification. Product should be GRIHA, SCS IAQ, certified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuer`s website

Providing and Placing Table size shall be 1350 Width mm x 750 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edge banding. Understructure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA, Finish: powder Coat( epoxy polyester). Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube, finish powder coat ( epoxy polyester). The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 5 and MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyester) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveler. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyester) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyester). The OEM should be having valid ISO 9001:2015, ISO 14001: 2015, ISO 45001:2018 certificates as per NABCB guidelines and BIFMA membership and AIOTA certification. Product should be GREENGUARD, GRIHA,SCS IAQ, certified. The certificates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certificate must be verifiable from the authorized issuer`s website.

Providing and Placing Visitor Chair, The seat assembly shall be made up of 1.2 ±0.1cm, thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back assembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 64.5 cm (H). The HR polyurethane foam shall be moulded with density =45 plus /-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The powder coated (DFT 40-60 microns) tubular frame shall be cantilever type and made of dia 2.54±0.03cm x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. Overall Dimensions of Chair shall be Seat Height 46.5cm, Height - 97.5cm, Width and Depth of Chair as measured from pedestal-Width-61.0 cm and Depth-64.5 cm. The OEM should be having valid ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 certificates as per NABCB guidelines and BIFMA

Happy