WELCOME MAINT, PERIODICAL SERVICES AND REPAIRS TO JOINERY INCLUDING PLASTERING TO CERTAIN BUILDINGS, REPAIR TO SANITARY FITTINGS, TILING , ETC, CLEANING OF SEWAGE LINES, MANHOLES AND CERTAIN MAINT WORKS AT KANHERI HILLS UNDER GE AF THANE

Amount

M&L for preparation of surfaces plastered or unplastered old surfaces of walls and apply one coat of white wash on walls ,complete all as specified and as directed by Engr-in-charge.

Ditto as per Srl Item No 1.01 above but on ceiling

M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat of distemper oil-emulsion on walls all as specified.

M&L for washing,rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of distemper oil-emulsion on ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for Complete removal of existing treatment of distempered and painted surfaces of wall and applying two coat of distemper oil-emulsion over a coat of alkali resist primer on walls ,complete all as specified and as directed by Engr-in-charge.

M&L for 3mm thick one coat of wall care putty on wall ,complete all as specified and as directed by Engr-in-charge.

M&L for 3mm thick one coat of wall care putty on ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old surface of wall in any position washing down with water and cleaning the surface from all loose dirt, chalk, grease, fungal etc and finishing wall with one coat of weather proof acrylic paint etc ,complete all as specified and as directed by Engr-in-Charge.

M&L preparation of old painted steel surface & applying a coat of synthetic enamel paint all as specified.

M&L for preparation of old wooden surfaces of any description over 10cm width & girth not otherwise described and applying a coat of synthetic enamel paint complele all as specified

Taking down cement plaster any description etc incl racking out joints, hacking for key scrubbing down with water etc complete all as specified.

M&L for rendering 5mm thick in CM 1:4 on fair faces of concrete as in ceiling of slab finished even and smooth without using extra cement all as specified.

M&L for rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all as specified.

M & L for rendering 20 mm thick (15 mm thick backing coat in Cement mortor 1:6 and 5mm thick finishing coat in Cement mortor 1:4 ) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately)

Supply only liquid water proofing compound ,complete all as specified and as directed by Engr-in-charge.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparing new plastered surfaces and applying two coat of OBD over a coat of alkali resistant priming paint complete all as specified.

M&L for preparing new plastered surfaces of ceiling and applying two coats of OBD over a coat of alkali resistant priming paint complete all as specified and directed.

Repairs to Shutters after taking down of any description n.exc 1 Sqm each and Refixing in same opening complete all as specified and directed.

Repairs to Shutters after taking down of any description exc 1 Sqm and n.exc 2 Sq.m each Refixing in same opening complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connections incl cleaning for refixing or removal to store ,complete all as specified and as directed by Engr-in-charge.

S&F GI tubing medium grade 25mm dia with all fittings and fixed complete to walls, ceilings or floors etc complete all as specified and directed.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.

S&F in repairs Soap dish, SS chromium palted, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Pillar taps, 15mm cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

–Ditto - all as per Srl Item No 26.00 above but colour wash on walls all as specified

M&L preparation of old painted surface of wall & applying a coat synthetic enamel paint all as specified.

M&L for Preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

S&F in repair aluminum anodized windows/doors with necessary accessories/fitting after taking down and refixing after replacement of broken aluminium section, rectification of roller, wiremesh, window panes etc Note : All items used in rectification shall be paid separately under Srl Item No.31.00 to 34.00 respectively as a supply only

Supply only aluminium anodised powder coated frame for doors/windows, ventilators and aluminium section for windows as directed

Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane

Taking down chowkats or frames with shutters (without taking off shutters form frame) n. exc 1.5 sqm each ,complete all as specified and as directed by Engr-in-charge.

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening with stainless steel screws of required size ,complete all as specified and as directed by Engr-in-charge.

S&F factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. Including 3 Nos of stainless steel 100 mm size hinges, 2 Nos of aluminium 100 mm size handles, 2 Nos of toer bolt 100 mm size all as directed

Taking down chowkats or frames with shutters (without taking off shutters form frame) exc 1.5 sqm & n.exc 4 sqm each ,complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each or otherwise as directed complete all as specified.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated.

S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats.

S&F 40mm thick Flush shutters,solid core construction,with block board core and one face plywood face commercial type panels, other face is covered with decorative face veneer with lipping/frame to match etc complete all as specified and as direted .

M&L for 25 x 3mm FI holdfasts for fixing door frame all as directed.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc complete all as spcd.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples ,complete all as specified and as directed by Engr-in-charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm length and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long ,complete all as specified and as directed by Engr-in-charge.

S&F Floor door stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,complete all as specified and as directed by Engr-in-charge.

S&F extruded aluninum alloy handles, fabricated type anodized 150mm long fixed ,complete all as specified and as directed by Engr-in-charge.

S&F butt hinges, medium weight, cold rolled mild steel, and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate ,complete all as specified and as directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm ,complete all as specified and as directed by Engr-in-charge.

S&F sheet glass ordinary quality 3.00mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane ,complete all as specified and as directed by Engr-in-charge.

S&F figured glass, pin-headed type 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane ,complete all as specified and as directed by Engr-in-charge.

Repairs to shutters of any description n. exc 1 sqm each easing & adjusting without taking down ,complete all as specified and as directed by Engr-in-charge.

Repairs to shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm ,complete all as specified and as directed by Engr-in-charge.

S&F ,in repair, Drapery curtain rod/ Harrison rails of anodised aluminium alloy complete with MS brackets golden colour rings and sode caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed by Engineer-in-charge.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

Dismantling boarding, any description,, fixed in any position with screws complete all as specified and directed

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed

S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed.

S&F Mild steel butt hinge, 75 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required ,complete all as specified and directed.

M & L For cleaning of OH PVC Service Tank internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with roatary sets with approved detergents and sucking all dirty water by avaccum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, all as directed by Engg-in-charge. (a) Overhead Pvc water tank upto 500 Liters of capacity NOTE- cleaning of OH PVC service tanks are safely to be handled Damage and bracking of tanks are on Contractors OWN risk.

Ditto as per Srl Item No 65.00 above but exc 500 ltr and n.exc 1000 ltrs capacity.

Ditto as per Srl Item No 65.00 above but exc 1000 ltr and n.exc 2000 ltrs capacity.

Dismantling water tank capacity exc 250 and n exc 500 ltr and removing to store ,complete all as specified and directed.

Dismantling water tank capacity exc 500 and n exc 1000 ltr and removing to store ,complete all as specified and directed.

S&F 500 Ltr Rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engr in Charge.

S&F1000 Ltr Rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engr in Charge.

S&F in repair 20mm Ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms complete complete all as specified and directed by Engr in Charge.

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr in Charge.

Taking down steel tubing & connections incl cleaning for refixing or removal to store for 15mm bore of pipe all as specified and directed by Engr in Charge.

Taking down steel tubing & connections incl cleaning for refixing or removal to store for 20mm bore of pipe all as specified and directed by Engr in Charge.

M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors all as specified and directed by Engr in Charge.

M&L for 20mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors all as specified and directed by Engr in Charge.

Refixing old GI steel tubing with and including necessary fitting& connections in new or old position (walls, ceiling, floors etc) 15 mm bore of pipe all as specified and directed by EIC.

Refixing old GI steel tubing with and including necessary fitting& connections in new or old position (walls, ceiling, floors etc) 20 mm bore of pipe all as specified and directed by EIC.

M&L in repairs orrisa pattern viterious china ware water closet white glazed of pan size 580x440mm with integral foot rest fixed flushed pipe including all joints and making good to the floor all as specified and directed by Engr in Charge.

S&F in repairs wash down water closet (EWC) (pedestal pattern) complete(excluding flushing cistern or flush pipe) all as specified and directed by Engr in Charge.

S&F in repair low level flushing cistern plastic valve less syphonic action type white with inlet ball valve float and ball handle & capacity 10 ltr ISI marked including 32mm PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 X 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed. .

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel hinge chromium plated all as specified and directed by Engr in Charge.

S&F in repairs brass cromium plated shower rose with swivel joint 125 mm size all as specified and directed by Engr in Charge.

S&F in repairs bib tap 15mm bore chromium plated cast copper alloy with crutch or butter fly handle but fancy type screwed down screwed for iron pipe complete all as specified and directed.

S & F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed by Engr in Charge.

S & F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe15mm dia all as specified and directed by Engr in Charge.

S&F in repairs quarter turn stop valves CP Brass fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm dia all as specified and directed by Engr in Charge.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

Supply and fix 50mm GI pipe, medium grade in isolated length of 400mm long inserting into wall surfaces with 100mm projecting from the external face of wall as in water draining spout complete all as specified and directed.

Material and labour for rendering in CM (1:4),15mm thick on wall of sunken floor suraces finish the surface even and smooth without using extra cement mixed with water proofing compound complete all as specified and as directed. (Note : WPC will be measured and paid in supply only rate)

Materials & labour for water proofing treatment to sunkun floors with the following courses of treatment :- (a) Apply first layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.126 kg/sqm all as specified. (b) Apply second layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.253 kg/sqm including cleaning the surfaces and all as specified. (c) Apply 200 micron thick polythene film pasted with the help of adhesives shall be provided over treatment all as specified. Note :- The slope of slab shall be 1:20 towards the corner of outer walls and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 10 cm which should be measured and paid separately,

Material and labour for cement concrete 1:4:8 type D2 (using 40mm stone aggregate) as in filling in sunkun floor complete all as specified & directed.

Supply and fix salt glazed stoneware traps "P" type with 100 mm bore of pipe fixed in repairs setting the trap and pan in 150mm thick all around cement concrete including taking down old trap complete all as specified and as directed

Supply and fix Cast Iron floor trap, 75mm dia out let with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 including taking down old floor trap complete all as specified and as directed .

Supply and fix PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed

supply and fix as in repair cast iron Nahani trap of 100mm dia including jointing to waste pipe fixed in cement concrete type 1:2:4 type B1 complete all as specified and as directed .

Dismantling cast iron drain pipes of any description complete all as specified and as directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Ditto as per Srl Item No 100.00 above but 75 mm bore.

Fixing only old serviceable cast iron soil waste and vent pipes of 100mm bore in any lenth with or without ears with cement joints fixed to walls complete all as specified and as directed ( Note: Serviceable pipe obtained from Srl Item No.99.00 above shall be reused against this item).

Supply and fix in repairs (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip ,complete all as specified and as directed.

Ditto as per Srl Item No 103.00 above but for 75mm bore dia.

Supply and fix PVC bend/shoe 110mm dia all as specified and as directed.

Ditto as per Srl Item No 105.00 above but for 75mm dia pipe.

Supply and fix (SWR) branch pipes single Y equal or unequal or `T' junction 110mm dia with access door complete all as specified and as directed.

Ditto as per Srl Item No 107.00 above but for but 75mm dia pipe.

Supply and fix 110mm dia (SWR) vent cowl.including dismantling the existing one complete all as specified and as directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stone and rubbish of the premises ,complete all as specified and as directed.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles 300x200 x7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

M&L,in repair, PVC (SWR) 75mm bore floor trap, plain with grating including jointing with solvent cement fixed ,complete all as specified and as directed.

S&F,in repair, PVC (SWR)110mm bore bend fixed ,complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single T equal or unequal 110mm bore ,complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single T equal or unequal 75mm bore ,complete all as specified and as directed.

S&F 75mm bore PVC (SWR) vent cowl ,complete all as specified and as directed.

M&L,in repair, PVC (SWR) vent cowl 110mm bore fixed,complete all as specified and as directed.

S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed.

S&F in repair PVC cover for tanks of capacity 500 to 1000 ltrs including taking out old broken covers with GI nuts and bolts 3/16" dia and 1" long bolts with washers (8 Nos with each cover and 2 Nos hing bolts and nuts 8 mm dia 50 mm long complete all as specified and directed.

S&F 32mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm?45gms/40mm-60 gms),complete all as specified and as directed.

S&F 40 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm?45gms/40mm-60 gms,complete all as specified and as directed.

M&L for Opening out cracks, removing the loose material. Filling with polymer modified mortar and applying two coats of cross link polymer Ru-flex WG. Ru-flux WG to be mixed with cement and water in 1:0.9::0.10 ratio where 1 part Ru-flex, 0.9 part cement & 0.10 part water thoroughly mixed to form a brushable slurry and applied with a regular paint brush all as specified.

M&L complete removal of existing treatment on surface of wall etc in any position washing down with water and clearing the surface from all loose dirt, chalk, grease, fungi,algal, flakes etc, and applying two coats of weather proof acrylic paint over a coat of weather proof primer with camoulfage pattern complete all as directed.

M&L Preparation of old treated brick or concrete wall, cleaning the surface from all loose dirt chalk greese fungi, algai flakes and applying one coats of acrylic paint weather proof exterior grade with camouflage pattern complete all as specified and directed by engineer-in-charge. Note: Painting surface may not be directly accessible due to some obstructions, Hence qoated rates shall include necessary scaffholding etc.

Opening cover of septic tank, dewatering and taking out night sludge etc from septic tank and removing sludge outside MD land and cleaning the septic tank as per BMC rules and placing the cover in original position ,complete all as specified and as directed by Engr-in-charge. Note: (i) All T&P including labour shall be provided by the contractor at their own cost. (ii) The measurement for the quantity of sludge removed will be arrived by multiplying the inner dimensions of septic tank to actual depth of sludge deposited by dipping the measuring rod. The depth shall be of that wet surface on measuring rod for payment purpose.

Cleaning/clear of blockage of manholes, gully traps, floor traps, vertical soil/waste pipe of different dia and sewage line in the area of AFS Khills by providing and deployment of 02 (TWO) Nos of Labours per day including Sundays and Holidays. Note : a) The labour (02 nos) will report daily at 0845 hrs on all working days including Sundays and holidays at complaint cell centre to attend complaints given by EIC.Complaints needs to be cleared within 24 hrs after receiving the complaints. The contractor will deploy requisite labour and supply all T&P ( mechanical Iron rods, knot ropes , bamboo etc.) scaffolding ladders any other materials required to clear the blockages at the site without any extra cost .Labour for cleaning of sludge from sewage lines (any dia) to manhole is included in quoted rates. In case any labour does not report to EIC for the whole day or found missing more than half an hour on any day, Panel recovery @ RS.900/- per head per day shall be made proportionally from contractor's dues. b) The recovery will be made from the contractor @250 Rs per complaint which are not cleared within 24 hrs from the date and time of receipt of complaints. Decision of EIC is final in this respect. Two persons will be provided by the contractor at site. The above item includes conveyance cost of labour with their tools to travel from pocket to pocket to attend complaints including removal of sludge from the site outside MOD land to a distance not exc 5km (The department shall not be liable to provide any kind/form of transportation to the labour). (c) Registers of labour attendance and complaints slips shall be maintained by contractor at their own cost, which shall be kept in the custody of MES Department(complaint cell) duly signed by contractor's representative ,JE(civil) and Engineer in charge. (d) The documents viz. attendance register, complaint register, log sheet / record of complaint made / attended shall be maintained separately for each locations / complaint center.(e) The police verification with regard to antecedent and character of tradesmen engaged by the tenderer, shall be carried out by the contractor at his own expenses before obtaining temporary pass on monthly basis. (f) The police verification report, showing names and addresses of tradesmen shall be required to be submitted to the Engr-in-Charge/GE as and when asked for. (g) The contractor shall submit attested copies of necessary safety insurance for subject tradesmen/supervisor employed for the execution of contract.

Demolition of brickwork or stone boulders masonry built in CM for foundation etc or for shafts, walls cesspits, manholes etc complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris to a distance n.exc 50mm complete all as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and n exe 1.5 mtr in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, sewage lines, etc. not exceeding 10 Sqm on plan and getting out in soft /loo soil. complete all as specified and directed by Engr-in-Charge.

M&L for Pre cast cement concrete block masonary with solid blocks type type C1 (using 20mm graded stone aggregate) exc 10 cm width and set in CM (1:4) all as specified and as directed by Engr-in-Charge.

M&L for Salt glazed stone ware drain pipes grade 'A' internal dia of pipe 150 mm laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed by Engr-in-Charge.

M&L cement Concrete bed to drain pipes including packing under and completely surronding pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) bore of pipe is 150 mm complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs salt glazed stone ware gulley traps, square or round mouthed type 'P' of size 180 mm x 150 mm complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound including finished even and smooth without using extra cement complete all as specified. Note: Water proofing compound will be measured and paid seperately.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching for manholes etc including weathering slighting rounded or chamfered angles and throuting including necessary formwork complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc (Inner girth only measured) complete all as specified and directed by Engr-in-Charge.

Demolition of RCC Manhole covers, slabs etc of any description and in any position not specifically provided for,complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in manhole cover of any section with plain fair faces including chamfers, weatherings, throating etc and setting in cement mortar 1:4 complete with joints to match.complete all as specified and directed by Engr-in-Charge.

M & L for TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars complete all as specified and directed by Engr-in-Charge.

Ditto as per Srl Item No 141.00 above but 6 mm to 8 mm dia, quality confirming to Fe 410-S or Fe 410-0

M&L for Cutting into existing manholes for connect in new drains making good to pipe and rendering cutting out existing benching for and forming branch channel ½ round or ¾ section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete type C-2 1:3:6 (40 mm graded aggregate) as in plinth protection 75mm thick complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading, levelling watering and well ramming in leyers n.exc 25cm each layer in soil complete all as specified and directed by Engr-in-Charge.

Removing surplus soil n.exc 50 mtr away deposited where directed n.exc 1.50 mtr high from the starting point complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood,steel or RCC.) any section,including taking out embedded portion and making good disturbed natural ground.

Excavating in post holes(or similer holes) each n exc 0.5 cum getting out,returning filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface ,complete all as specified and as directed.

M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete ,complete all as specified and as directed.

S&F Hand rails,half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts.posts and struts in fencing including cutting tops to shape as directed ,drilling holes,notching for wires, etc, flat iron fillets(for securing wire mesh etc.) including all necessary drilling,bolting or riveting etc.and similer work conforming to Fe-290 Gde E-165 (For Fencing)

S&F in Repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) ,complete all as specified and as directed.

Dismantling fencing wire mesh,any type.(for Chain link Fencing) ,complete all as specified and as directed.

S&F GI wire chain link fencing ( Minimum wt 2.5kg/sqm) minimum 2.5mm thick (excluding PVC coat) , UV resistant ,1mm dia PVC coated ,75X75mm mesh size,complete all as specified ans directed by Engineer-in-Charge.

S&F Tie bars with screwed ends, nuts, washers and mild steel paltes for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 410-0 or Fe 310-0 ,complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long diameter of the neck in 5 to 10 mm ,complete all as specified and as directed.

S&F Mild steel Round bars 10mm dia and over,cut to length, bent to shape required,complete all as specified.

S&F,in repair,concertina coil fencing with punched tape concertina coil 1050 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (Note: cost of M.S. angle, shall be paid separately under relevent item of Sch A)

Restraining and resecuring including making good staples etc.of exiting galvanised barbed wire and fixing to any type of standard rails straining bolt including securing or tying at crossing with and provision of galvanised M.S wire stapes or steel pins, etc or deirect (each line wire to be measured) complete all as specified and directed by Engr in Charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair. complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry With grey cement and pigments in flors over 15 mm thick screed bed 1:6 complete all as specified and directed.

Dismantling floor tiles, paver block or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and staking and reuse for similar works all as specified and directed.

M&L for stone dust layed in floors or paving etc spread, levelled and rammed including watering complete all as specified and directed.

Labour only (except tiles) machine pressed precast concrete inter locking paver block with grey cement and pigment (Reflective type) in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade as specified and directed.

M&L Machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with mixture of grey cement and pigment (Make: Ultra Tiles or equivalent) complete as specified and directed

M&L for walling of random rubble, brought upto courses, built in CM 1:6 complete all as specified and directed by Engr in Charge.

Ditto as per Srl Item No 168.00 above but except stones.

M&L for raised pointing to random or poygonal rubble, uncoursed or brought up to courses in CM 1:4 etc. complete all as specified and directed by Engr in Charge.

Racking out joints/ pointing to random rubble or polygonal rubble uncoused brought up to courses complete all as specified and directed by Engr in Charge.

Demolition of un-reinforced cement concrete in any position complete all as specified and directed

M&L for PCC 1:4:8 (using 40 mmgraded stone agg) type D2 as in foundation and sub base etc complete all as specified and directed.

M&L for cement concrete Type B1 1:2:4 (20mm aggregate) lintels in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed by Engr in Charge.

M&L for providing cement concrete (1:2:4) type B-1 using 20mm graded stone agg as in roof kerbs or mud stops, etc and other similar work as required and specified including necessary form work complete all as specified and directed by Engr in Charge.

Biju Construction & Co

Shree Gajanan Enterprises

M/s Qureshi Construction Co