Provn of certain sanctioned special repair and LBW works at Mil Stn Kapurthala under GE Kapurthala

Amount

Dismantling of floor hearth or wall tiling including granite, cement mortar bedding ( but not backing) and rubbish off the premises complete all as specified & directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces 350x 250x 7mm/ 450/x350x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed (1:4) complete all as specified & directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed(1:6) complete all as specified & directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but n.exc 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed(1:6) complete all as specified & directed by Engr-in-Charge.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises complete all as specified & directed by Engr-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick work or concrete surfaces incl racking out joints complete all as specified & directed by Engr-in-Charge.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces finished even and smooth etc complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying one coat of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge

M & L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified & directed by Engr-in-Charge.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper on ceiling over a coat of primer complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified & directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n exe 4 sqm each complete all as specified & directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified & directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified & directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame complete all as specified & directed by Engr-in-Charge.

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters complete all as specified & directed by Engr-in-Charge.

S &F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified & directed by Engr-in-Charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified & directed by Engr-in-Charge.

S &F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified & directed by Engr-in-Charge.

S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar complete all as specified & directed by Engr-in-Charge.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf . Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified & directed by Engr-in-Charge.

Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified & directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified & directed by Engr-in-Charge.

S&F 4.00 mm thick sheet glass, pinhead type in squares exc 0.5 sqm each pane and glazing with oil putty complete all as specified & directed by Engr-in-Charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified & directed by Engr-in-Charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified & directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified & directed by Engr-in-Charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified & directed by Engr-in-Charge.

Dismantling of wall lining or ceiling of any description fixed in any position fixed with nails/screws including fillets complete all as specified & directed by Engr-in-Charge.

M & L for 12mm perforated particle board 600 x 600 x 12mm for ceiling on aluminium snap grid frame work of 605 x 605 mm and hangers 6mm dia GI upto (1200mm length) adjusting level fixed to roof slab by means of celing cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fastner 12.5mm dia 40mm long complete all as specified & directed by Engr-in-Charge.

Taking down roof trusses, coupled rafters or trussed beams of span above 4meters and upto 8 meters complete all as specified & directed by Engr-in-Charge.

M&L mild steel rolled section Fe 410-W (Gde-E-250) Quality A as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates complete all as specified & directed by Engr-in-Charge.

Dismantling corrugated asbestos sheet in roof covering complete all as specified & directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engr-in-Charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified & directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engr-in-Charge.

Supply and fix for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified & directed by Engr-in-Charge.

S&F vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat black closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity make white in colour and PVC flush pipe 32mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified & directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete all as specified & directed by Engr-in-Charge.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified & directed by Engr-in-Charge.

S&F in repairs shower rose size 125mm with CP arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified & directed by Engr-in-Charge.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified & directed by Engr-in-Charge.

M&L for 20mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid complete all as specified & directed by Engr-in-Charge.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as specified & directed by Engr-in-Charge.

M&L for 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid complete all as specified & directed by Engr-in-Charge.

Dismantiling water tank PVC 500 Ltrs and removing from site complete all as specified & directed by Engr-in-Charge.

S&F rotational moulded polythelene water storage tanks, three layer (Cylinder each vertical with closed top) of capacity 500ltrs hoisted and fixed in postion incl fittings complete all as specified in SSR Part -1and as directed by Engr-in-Charge.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 25mm fixed in repairs complete all as specified & directed by Engr-in-Charge.

S& F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 25mm-455gms) complete all as specified & directed by Engr-in-Charge.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge.

Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge.

Excavation in trenches not exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or man holes etc n.exc 10 Sqm on plan & n.exc 1.5 m in depth & getting out in soft/loose soil complete all as specified & directed by Engr-in-Charge.

Demolition and breaking up 300mm bore drain pipe of any type, in cement mortar and taking out from tranches complete all as specified & directed by Engr-in-Charge.

S&F Reinforced concrete pipes,300MM Dia class NP2, laid and jointed complete with collars complete all as specified & directed by Engr-in-Charge.

Material and Labour for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) concrete bed to drain pipe incl packing under and haunching against the sides of pipe as they are laid and tested for 300mm bore pipe complete all as specified & directed by Engr-in-Charge.

Returning filling in incl spreading leveling and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified & directed by Engr-in-Charge.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified & directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation of man holes complete all as specified & directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-0 (using 20 mm graded agg) as in coping, benching of drains and Man holes including necessary form work complete all as specified & directed by Engr-in-Charge.

M&L for pre cast cement concrete 1:2:4 as in man hole and drain covers type B-1 (20 mm graded agg) as in manhole cover set in cement mortar 1:6 complete all as specified & directed by Engr-in-Charge.

Surface dressing not exceeding 15cm deep including cleaning away all grass vegetation, sapling, shrubs, brushwood, undergrowth, roots and removing rubbish upto a distance of 50 Metres outside the periphery of the area complete all as specified & directed by Engr-in-Charge.

Excavating over areas n exc 1.50m deep and getting out in soft/ loose soil complete all as specified & directed by Engr-in-Charge.

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone agg) as in foundation, subbase masonary complete all as specified & directed by Engr-in-Charge.

M&L RCC (design mix) M-25 (20mm graded agg) as in columns, pillars, piers, posts and struts complete all as specified & directed by Engr-in-Charge.

M&L RCC (design mix) M-25 ( 20mm graded agg) as in foundation, including rafts,plinth beams, footings for columns etc complete all as specified & directed by Engr-in-Charge.

M&L for Reinforced cement concrete (design Mix) M-25 (20mm graded aggregate) as in Lintels & roof beam etc complete all as specified & directed by Engr-in-Charge.

M&L for Reinforced cement concrete (design Mix) M-25 (20mm graded aggregate) as in slabs complete all as specified & directed by Engr-in-Charge.

M&L for formwork to sides of concrete foundations, footings, bases of columns, plinth beam and similar work complete all as specified & directed by Engr-in-Charge.

M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc. complete all as specified & directed by Engr-in-Charge.

M&L for formwork to sides of pillars, posts,columns etc in square, rectangular and similar work complete all as specified & directed by Engr-in-Charge.

M&L for formwork to sides or soffits of floor or roof beams,lintels,cantilevers,shelves including sup-ports,overhangs and similar work complete all as specified & directed by Engr-in-Charge.

M & L Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified & directed by Engr-in-Charge.

Supply and fix TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed by Engr-in-Charge.

Ditto all as per item no 15,but 6mm To 8mm dia, complete all as specified & directed by Engr-in-Charge.

Supply and fix TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat of primer complete all as specified & directed by Engr-in-Charge.

Material & labour for machine cut kota stone slab flooring 18-20 mm thick as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing incl screed bed cm 1:6 15mm complete all as specified & directed by Engr-in-Charge.

All as per srl item No 30 here in before but as in skirting/dado laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing complete all as specified & directed by Engr-in-Charge.

M & L 75mm thick PCC(1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection and finishing the surface even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M & L for preparation of new painted steel surfaces of any description over 10 cm width of girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified & directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified & directed by Engr-in-Charge.

M&L for granite 20mm thick machine cut, bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick bedding layer in CM 1:6 complete all as specified & directed by Engr-in-Charge..

M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound complete all as specified & directed by Engr-in-Charge.

Supply only integral water proofing compound complete all as specified & directed by Engr-in-Charge.

M&L for Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified & directed by Engr-in-Charge.

M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified & directed by Engr-in-Charge.

M & L machine pressed precast conc. interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigment complete all as specified & directed by Engr-in-Charge.

Sand filling 50 mm thick under floors or in foundations including watering and consolidation complete all as specified & directed by Engr-in-Charge.

Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in kerb stone for path with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete all as specified & directed by Engr-in-Charge.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable punned down to 10 cm for under ground cable complete all as specified & directed by Engr-in-Charge. Note : Punned down sand will be considered for measurement

M&L for Protection to cable with one layer of new bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks complete all as specified & directed by Engr-in-Charge.

Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of following cross sectional area complete all as specified & directed by Engr-in-Charge. Make : Havells, Polycab, KEI,Finolex

(a) 50 Sqmm 3.5 core

(b) 16 Sqmm 4 core

Supply and layng GI pipe light grade 50 mm bore for cable porotection fixed to poles/along wall/floor/under road/preparation of GI bracket etc across the drain or nallah with clamps. Bolts, nuts & washers etc complete all as specified & directed by Engr-in-Charge.

Cutting the existing 40/50mm dia GI/CI pipe line for insertion and including of suitable tee, jointing material, excavation and earth work etc complete all as specified & directed by Engr-in-Charge.

Supply and laying in trenches/ along wall/floor pipe galvanised iron medium grade 25mm bore including fittings complete all as specified & directed by Engr-in-Charge.

Supply and fixing to wall and ceiling pipe galvanised iron medium grade 20mm bore including fittings complete all as specified & directed by Engr-in-Charge.

Supply and fixing Gate valve flanged complete of size 25 mm dia

Supply and fixing Gate valve flanged complete of size 20 mm dia

Taking down old unsv carefully point wiring on casing caping/through conduit (light fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified & directed by Engr-in-Charge.

M & L for point wiring for one light or one fan point controlled by one switch or with one switch and regulator with PVC unsheathed single core multistranded copper conductor (FRLS) cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm bore by cutting chases in wall by cutter and making good the surface in cm 1:3 and to the original specification and cast iron /pressed steel concealed terminal boxes including providing 3mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated copper conductor cable of size 1.5 sqmm with green insulation as earth wire and connected to earth dolly complete all as specified & directed by Engr-in-Charge. Make of cable: Finolex/polycab/Havell’s/V Guard

(a) one light point controlled by one, one way switch

(b)one fan point controlled by one, one way switch

(c) one socket outlet 3 Pin, 6 Amp on independent board.

(d) one socket outlet 3 Pin, 6 Amp on same board.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel terminal boxes including providing new 3 mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified & directed by Engr-in-Charge.

Supply & fixing switch piano flush type 5 Amp single pole one way complete all as specified & directed by Engr-in-Charge. (Make-Havells/Bajaj/Legrand)

Supply & fixing switch piano flush type 15 Amp single pole one way complete all as specified & directed by Engr-in-Charge. (Make-Havells/Bajaj/Legrand)

Supply & fixing socket outlet 5 pin 5 Amps flush type multipurpose complete all as specified & directed by Engr-in-Charge. (Make-Havells/Bajaj/Legrand)

Supply & fixing socket outlet 5 pin 15 Amps flush type multipurpose complete all as specified & directed by Engr-in-Charge. (Make-Havells/Bajaj/Legrand)

Supply & fix electronic type fan regulator stepped type on existing phenolic laminated sheet etc. suitable for ceiling fan complete all as specified & directed by Engr-in-Charge.

Supply & fixing ceiling rose surface bakelite 65 x 50mm three terminal complete all as specified & directed by Engr-in-Charge. (Make-Havells/Bajaj/Legrand)

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface complete all as specified & directed by Engr-in-Charge.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified & directed by Engr-in-Charge. Make Polycab Cat part No PCGLB AX 2060 or equivalent in Philips/Bajaj/C&S electric/Surya

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W complete all as specified & directed by Engr-in-Charge..

Taking down old unsv DB and Supply & fixing factory made powder coated distribution board SP & N, 230 V,8 way,mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified & directed by Engr-in-Charge. Make Legrand ,Havells, Schnieder & L & T s.

Supply & fixing factory made powder coated distribution board TPN, 415 V, 4 way,mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified & directed by Engr-in-Charge. Make Legrand, Havells, Schnieder & L & T s.

Supply & Fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified & directed by Engr-in-Charge. Make Legrand /Havells/ Schnieder & L & T

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 Amps capacity in the MCB DB complete with connection testing and commissioning complete all as specified & directed by Engr-in-Charge. Make Legrand /Havells/ Schnieder & L & T

Supply & Fixing 415V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 Amps capacity in the MCB DB complete with connection testing and commissioning complete all as specified & directed by Engr-in-Charge. Make Legrand /Havells/ Schnieder & L & T

Sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 6.00 Sq mm 1100 volts grade including and 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified & directed by Engr-in-Charge. Note : Two run of 6 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

S&F in replacement Exhaust fans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specified & directed by Engr-in-Charge. (Make-BAJAJ, HAVELLS, USHA)

COSMO BUILDERS

Motorway Constructions

G M BUILDERS 36