REWIRING OF OTM BLDG INSIDE HOSPITAL AREA AND CONNECTED WORKS AT 7 AFH KANPUR CANTT

Amount

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB DB’s , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash as required complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated and unsheathed copper stranded conductor cable of size 1.5 Sq mm , 1100 V drawn in and including PVC casing and capping complete including cast iron/pressed steel terminal box 1.6 mm thick of required size Bakelite sheet 3mm thick for mounting switch , socket, brass screws and washer including PVC insulated and unsheathed solid copper wire of size 1.5 Sq mm will be used as continuous earth wire for the following :- Note:- Wiring shall be done using proper colour coding.

One light /fan point controlled by one, one way switch

One 5/6 Amp socket on the same board with other switch

One 5/6 Amp socket on independent board.

One bell point controlled by one, one way bell push button.

All as per item No 2.00 for One 3 pin 15 Amp socket on independent board with 2.5 sqmm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm

Ditto all as per item No. 2 here-in-before but concealled wiring drawn in and including non metallic PVC conduit 20 mm dia medium grade for the following :-

One light fan point controlled by one way switch.

One 3 pin 5 Amp socket on the same board

One 3 pin 5 Amp socket on independent board.

One bell point controlled by one push bottom switch.

All as per item No 4.00 for One 3 pin 15 Amp socket on independent board with 2.5 sqmm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm

S & F switch piano type 240 V, 5 Amp , SP one way flush type complete all as specified and directed.

S & F bell push 240 V, 5 Amp, SP one way flush type complete all as specified.

S & F socket out let combination multipurpose 3 pin 5 amp, 240 volt and with 2 pin 5 amp out let also flush type (non shuttered) complete all as specified and as directed.

S&F switch socket outlet combination 3 Pin 15 amp, 3 Pin 5 amp out let also flush type (non shuttered) complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin 5 amps all as specified and directed

S&F ceiling rose surface backelite 65 x 20 mm three terminal complete all as specified and directed

S&F for lamp holder metal cased body of brass with back plate complete with and including 5 Watt LED lamp all as specified and directed .

S&F sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated bus bar complete all as specified and directed.

S&F sheet metal enclosures for MCCB distribution board TPN, 4 way double door type including MCCB 4 Pole, 100 Amps, 16 KA fixed type as incomer with 200 amp rated bus bar complete all as specified and directed.

S&F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.

All as per item No. 15 here-in-before but for SPN 4 way 240 Volt.

S&F Isolator TPN , 63 Amp 4 pole, 415 Volt complete all as specified and directed.

S&F Isolator SPN , 63 Amp , 240 Volt complete all as specified and directed.

S&F MCB SP upto 32 Amp ,240 Volt complete all as specified and directed.

S&F MCCB 4 Pole 16KA 100 Amps fixed type complete all as specified and directed.

S&F Isolator SPN , 20 to 40 Amp , 240 Volt complete all as specified and directed.

S & F bell electric , 240 Volt , single pole complete all as specified and directed.

S & F fan regulator Electronic type 240 Volt single phase suitable for ceiling fan step type complete all as specified and directed.

M& L for earthing complete with galvanized steel earth plate electrode of size 60cm x60 cm x6.0 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 using 40 mm graded stone aggregate and RCC (1:2:4) type B-1 using 20 mm graded stone aggregate for cover slab reinforced with 6mm dia MS bars @ 150mm, 40mm thick with two no’s fitting handle, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 20mm dia light grade GI pipe for earth wire protection etc. complete all as specified and directed.

M&L for sub main wiring with two runs of single core 4 Sqmm (cross sectional area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn in and including PVC rigid conduit 20 mm dia with all necessary fittings and accessories and run of PVC insulated and unsheathed single core cable with copper conductor of size 4.0 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring commplete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run unit.

All as per item No. 25.00 here in before but 6 Sqmm, 2 single core with PVC FRLS insulated, unsheathed stranded copper conduct cable of size 6 Sqmm as earth lead complete all as specified and directed.

M & L for sub main wiring with three runs of single core 6 Sqmm (nominal area) PVC insulated and unsherthed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn in and including PVC casing N capping with all necessary fittings and accessories and 02xrun of PVC insulated and unsheathed single core calbe multi stranded with copper conductor of size 6 Sqmm as continouos nuetral and earth wire ( green in colour) respectively, run through PVC casing N capping and connected to the terminal and common earth dolly all as specified and directed.

S & F in repair bulk head fitting of any type with LED bulk fitting wiht 9 watt LED complete connection with copper wire 23/0076 two core from ceiling rose to bulk head fitting complete all as specified and directed Make C& S Model No CG801B6WLED or equivalent model of Philips/ Wipro/ C &S

S & F in repair bed light fitting with LED type surface mounted decorative bed light fitting 10 Watt LED complete with all accessories such as LED driver, LED bulb/rod and LED batten with cover etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as specified and directed. Make Crompton Greaves Cat Part No LCL-10-CDL or equivalent of C&S/Philips/Wipro

S & F in repair fluorescent tube light fitting complete energy efficient T-8 LED batten and integrated type signle tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as specified and directed. Make Cormpton Greaves Cat Part No DMLN1LT8-16 and LTT8-20 or equivalent of C&S/Philips/Wipro/Havells as approved by GE in writting.

S & F in repair of existing unserviceable recessed mounted lumanaire with energey efficient 36 Watt LED type including making connection to ceiling rose with copper flexible wire of size 23/0076 complete all as specified and directed. Make Crompton Greaves model No. LCTLS-36-CDL or equilavent model of Philips/Wipro/ Havells/C&S

S & F in replacement of modular switch 1 way 6 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F in repair of modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F in repair of modular bell push, flush type, 6 Amp, 1 module, 240 V complete all as specified and directed.

S & F in repair of modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed

S & F in repair of modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F in repair of modular fan step regulator, 120 W, 2 module, 240 V complete all as specified and directed.

S & F in repair of modular white cover plate with frame, 3 module, complete all as specified and directed.

S & F in repair of modular white cover plate with frame, 4 module, complete all as specified and directed.

S & F in repair of modular white cover plate with frame, 6 module, complete all as specified and directed.

S & F in repair of modular white cover plate with frame, 8 module, complete all as specified and directed.

S & F in repair of modular white cover plate with frame, 12 module, complete all as specified and directed.

S & F in repair of modular metal flush box, 3 module, complete all as specified and directed.

S & F in repair of modular metal flush box, 4 module, complete all as specified and directed.

S & F in repair of modular metal flush box, 6 module, complete all as specified and directed.

S & F in repair of modular metal flush box, 8 module, complete all as specified and directed.

S & F in repair of modular metal flush box, 12 module, complete all as specified and directed.

S&F in repair of electronic ballast for 28 Watt tube light complete all as specified and directed.

S&F in repair of lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repair Isolator TPN , 100 Amp, 4 pole Isolator, 415 Volt complete all as specified and directed .

S&F in repair MCB SP upto 32 Amp, 240 Volt complete all as specified.

S&F in repair bell electric, 240 Volt, single pole complete

S&F in repair regulator Electronic type 240 Volt single phase suitable for ceiling fan stem type complete as specified

S&F in repair replacement of electronic ballast 2 x 36 watt, for ceiling light fitting all as specified and directed Make- Bajaj/Crompton/ Philips

S&F in repair LED integrated pattern T8, indoor decoratie aluminium extruted LED fitting 36 watt, 4 feet complete including connection form ceiling rose to T8 LED light fitting with three core PVC flexible wire all as specified and directed Make- Crompton Greaves, C&S, Philips

S&F in repair flexible wire 23/0076 copper conductor from ceiling rose to fitting/fixture complete all as specified and directed.

S&F in repair Metal clad single pole and a nutral enclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp, 240V complete, Make- ABB/ Havells/ Crompton

S&F in repair Metal clad triple pole and a nutral enclosure with a two pin and earth plug and socket with one single pole MCB TP 32 Amp, 240V complete Make- ABB/ Havells/ Crompton

S&F in repair round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free ligh complete with drivers, holders, LED lamp suitable for roof ceiling including connection up with three core flexuble copper conductor cable of suitable size complete

S&F in repair LED smart bright steet light fitting 45 watt of IP66 protection with 70 % energy efficient finless design complete including testing complete wlong with connection with copper wire 1.5 Sqmm three core along with suitable bracket nut bolts washers complete all as specified and directed.

M/S PASHUPATI TRADERS

santosh electronics

SAKSHAM SUPPLIERS BUILDERS

SUSHMANAND ENGINEERING WORKS

S B ENTERPRISES

M/S Asian Engineers

Preetpowercontrol