Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.4 LAWARDED | AWARDED |
Tender Value
₹5.2 L
EMD Value
₹13,050
Closing Date
29 May 2025, 11:00 pmClosed
Directorate of Municipal Administration
Drilling of new Borewell and fixing of Motor pump set cable and Panal board work at ward no 16 and ward no 8 in Arakalagud town lilmit
DMA/2025-26/WS/WORK_INDENT39999
DMA/2025-26/WS/WORK_INDENT39999
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
DMA Town Panchayat Arakalgudu
₹500
₹13,050
13 May 2025
13 May 2025
31 May 2025
28 May 2025
Drilling of new Borewell and fixing of Motor pump set cable and Panal board work at ward no 16 and ward no 8 in Arakalagud town lilmit
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing wrought mild steel (galvanized) 50 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. (2023-24 SR V-5, P-129 I-11.6.6)
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm (2023-24 SR V-5, P-154 I-13.25)
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor. (PWD Elec...
Fixing a shunt capacitor of KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.Upto 5 KVAR (PWD Elec SR 2023-24 pno-5...
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc.,complete.(PWD Elec SR 2019-20 pno-41 ino-6.6.2).
Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.. 40 mm (PWD Elec S...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part 1) or IS-7098 Part 1 Armouring strip thickness and resistivity...
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe toneware pipe on wall on pole as required. In existing trench/duct. a) 6 Sqmm to 16 Sqmm. (PWD Elec SR 2019-20 pno-41 in...
Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc.,10 Sqmm...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.,, 32 amps (PWD Elect SR 2023-24, page-14, i.no-5.7.2).
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.(2023-24 SR V-5 P...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .