Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC NO 5 3 JJ KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | TAMIL NADU | 600014 | L1 | Accepted-AOC Not Lowest Bidder | |
| 2 | L2₹41.5 L+₹1.1 L (2.81%)Rejected-AOC T50 H NO T 50 NANGLI RAJAPUR NIZAMUDDIN EAST NEAR ISBT SARAI KALE KHAN SOUTH DELHI SOUTH DELHI DELHI 110013 UDYAM DL 08 0028221 | SOUTH EAST DELHI | DELHI | 110013 | L2 | Rejected-AOC Not Lowest Bidder | |
| 3 | L3₹47.1 L+₹6.8 L (16.8%)Rejected-AOC NO 15 PULAVAR GOVINDAN STREET GANDHI NAGAR AVADI CHENNAI 600 054 | AVADI | CHENNAI | TAMIL NADU | 600054 | L3 | Rejected-AOC Not Lowest Bidder |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, St.Thomas Mount
Garrison Engineer, St.Thomas Mount, Old MH Complex, Rudra Road, Chennai-600 016
SPL REPAIRS TO SEWAGE DISPOSAL SYSTEM AT NANDAMBAKKAM FAFA QTRS, SPL REPAIRS TO BLDG NO.P-43 OFFRS MD ACCN AT OFFRS LINE ARMY CAMP PALLVARAM AND PROVN OF TOILET FOR MT AREA AT ARMY CAMP PALLAVARAM UNDER GE STM CHENNAI
2022_MES_548787_1
8308-SPL REPAIRS TO SEWAGE DISPOSAL SYSTEM AT NAND
Open Tender
Civil Works
Item Rate
180 days
GE STM
As per tender documents
6 documents required · 6 mandatory
₹500
Garrison Engineer, St.Thomas Mount
₹84,000
Yes
16 Nov 2022
30 Aug 2022
11 Oct 2022
30 Aug 2022
3 Oct 2022
19 Sept 2022
30 Aug 2022 - 6 Sept 2022
Amount
Dismantling water tanks exc 500 & n.exc 1000 litres capacity without disturbing connected pipelines & adjacent surfaces and taken as sch of credit
Demolition of cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition)
M&L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in slab supported on walls, beams and columns in floors, roofs, shelves, water tank platform over roof slabs, etc
Use and waste formwork to soffits of suspended slabs such as roof slabs, landings, and similar work n.exc 200mm thick (Horizontal or sloping) rough finished surfaces of concrete flat
S&F triple layered rotational moulded polyethylene water storage tanks 1000 litres capacity white coloured (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1.complete all as directed.
S&F of 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight 25mm-455gms)
S&F 20 mm bore gun metal globe or gate, valves with iron screwed both ends for iron pipe & fixed
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for non skid ceramic tiles each tile area (square/ rectangle) exc 0.06 Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer with CM 1:6, for laying floor finishes all as specified and directed.
M&L for glazed ceramic tiles coloured 450 x 300mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.incl 10mm thick in CM 1:4 as backing coat for fixing dado tiles all as specified and directed
Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust, etc., brushing neat cement slurry with 3.0kg of cement per sqm
M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring 40mm thick finished even and fair.
M&L for non skid ceramic coloured tiles, area of each tile exc 0.18sqm and n.exc 0.38sqm (square/rectangle) 7 to 8mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement mortar screed bedding in CM 1:6 all as directed.
All as per item No 14 here in before, but on vertical surfaces incl 10mm thick CM 1:4 as in backing coat of dado/skirting
M&L for vitrified ceramic tile 10mm thick (square/rectangular) polished, area of each tile n not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick in CM 1:6.
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment incl 15mm thick cement screed bed in CM 1:6
All as per item No.17 above but on vertical surfaces inclusive of back coat in CM 1:4 of 10mm thick
M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection 75mm thick finishing cement concrete surface even and smooth without using extra cement.
M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete
Demolition of brick work, built in cement mortar incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles
M&L for brick work with old size fly ash bricks, straight or curved on the plan exc 6m mean radius built in CM 1:6
M&L for brick work with old size fly ash bricks, straight or curved on the plan exc 6m mean radius built in CM 1:4
M&L for brickwork with old size fly ash bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4
M&L for brickwork with old size fly ash bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4
Taking down cement or cement lime plaster, on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water, etc., any description.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 finished even and smooth without using extra cement including mixed with water proofing compound.
Supply only Liquid water proofing compound
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work/concrete work surfaces of wall finished even and smooth without using extra cement.
Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc 10 cm girth
Taking down GI water tubing and connections 15mm bore and taken as sch of credit.
Taking down GI water tubing and connections 20mm bore and taken as schedule of credit all as directed
Supply and laying of CPVC pipe 16 mm outer dia SDR 11 & plain CPVC DR fittings in wall/ceiling or laying in floors complete all as specified
Supply and laying of CPVC pipe 20 mm outer dia SDR 11 & plain CPVC DR fittings in wall/ceiling or laying in floors complete all as specified
S&F Brass Elbow suitable for CPVC pipe of outer dia 16 mm
S&F Brass Tee suitable for CPVC pipe of outer dia 16 mm
S&F Brass Elbow suitable for CPVC pipe of outer dia 20 mm
S&F Brass Tee suitable for CPVC pipe of outer dia 20 mm (20 mm x 16 mm)
S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, including flush pipes, connection to drain and to flushing pipe antisyphonage pipe, etc complete including WC seat cover.
S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed,
S&F in repairs 10 litres capacity PVC low level flushing cistern including flush pipe complete with ISI marked body syphon
S&F PVC connections 15mm size with PTMT nuts of length 450mm all as directed
S&F in repairs bib cock, fancy type chromium plated, screwed down, screwed for iron pipe, 15mm bore or for brass ferrule and fixed all as specified
S&F in repairs fancy type chromium plated angular stop cock long body
S&F CP wall mixer 2 in 1 for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe.
S&F Sink taps, chromium plated, screwed down, high pressure, with or without lettered with long screwed shanks and fly nuts, screwed for 15mm bore
S&F in repairs pillar taps, chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore
S&F in repairs corner shelves made of 5.5mm thick glass with CP railing including brackets all as specified and directed
S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and AVS wall hook including making connections and fixed in position complete in all aspect as specified.
S&F in repairs stainless steel soap dish all as specified and as directed
S&F Towel rail 600mm long & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 190gms)
S&F in repairs Chromium plated 125mm shower rose with or without swivel joints, any size, including fixing to steel pipe or union
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm
M&L for Granite (of any type) 18 to 20 mm thick machine cut , bedded and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.
Rounding to edges of stones slab one edge, such as in steps, cooking platform and other similar situation
S&F 32mm bore dia of discharge pipe of bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms)
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors/walls/in weep holes
S&F PVC (SWR) bends any radius 75mm bore with access door
S&F PVC (SWR) vent cowl 75mm bore
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm with access door
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors
S&F PVC (SWR) bends any radius 110mm bore with access door
S&F PVC (SWR) vent cowl 110mm bore
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm with access door
S&F 40mm bore PVC low density polyethylene pipes (LDPE) of pressure rating 6 kg/cm2 laid in trenches/walls all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-s or Fe-410-0
All as per item No.68 but 6 to 8mm dia bars
All as per item No.68 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs, shelves and set in cement mortar 1:4 complete with joints to match including necessary form work all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq. m each
M&L for 2nd class hard wood plain, solid, straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
M&L for 2nd class hard wood 35mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides
M&L for second class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed within wooden beading or with nuts and bolts to existing steel windows/wooden windows
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows.
M&L for sheet glass ordinary quality of 4.00 mm thick n.exc 0.5 Sqm panes
M&L for FI 25x3mm for hold fasts bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 Gde E-165
M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification all as directed. Note: The quote rate shall be inclusive of following:- (i) Existing/ new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size n.exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw, 3 each on either side (iii) supply and fixing PCC strip of section 5x5mm fixed at bottom including smooth finish in each door opening.
M&L for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site all as specification & all as directed
S&F in repairs curtain rails, Aluminium anodised alloy tubular 20mm dia with fixing brackets, stops, rollers, etc.
Treating ends of posts, back of chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each treated with tar or coal tar black paint
Treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of chowkats, etc., area n exc 0.1 sq.m each treated with tar or coal tar black paint
S&F mild steel butt hinges,100mm medium weight, cold rolled
S&F 100mm butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22
S&F extruded aluminium alloy handles,150mm fabricated type anodized
S&F Aluminium, 200mm anodized, barrel tower bolts extruded section
S&F Aluminium, 150mm anodized, barrel tower bolts extruded section
S&F Aluminium alloy, anodized, 300mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy
Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F framed work such as grills, gates, gratings framed guard bars, framed brackets end of bars forged or shouldered or riveted in to spikes conforming Fe.290. Gde-E-165
S&F anodised aluminium powder coated frame for window and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F powder coated aluminium anodised window and ventilators shutters side hung/sliding shutters without sash bars aluminium sections weighing 0.55 kgs complete all as specified
Complete removal of existing treatment washing, rubbing down and stopping of white wash/colour wash /cement base paint /distempered any description on wall surfaces.
M&L for applying two coats of distempering with distemper oil emulsion white or tinted on walls complete over a coat of wall primer over two coats of 1 mm thick wall care putty all as directed.
M&L for preparation of new plastered surface and applying two coats of exterior emulsion weather proof paint over two coating exterior wall care putty of external wall primer and all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S&F E-grid suspended false ceiling grid system of size 600x600mm with main runner 29x24.7x0.65mm cross tee 29x24.7x0.65mm and wall angle 22.2x22.2x0.50mm. Ceiling suspended with 3mm dia GI wire hanger fixed with steel dash fastener, butter fly clips, hold down clips etc (Main runner, cross tee& wall angle of MS galvanised with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling incl one coat of distemper complete .
M&L for painting new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of wood pink primer including preparation of surfaces.
Preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint.
M&L for painting new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of surfaces.
Preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint.
Demolition of PCC in ground floor or pavings not exceeding 15 cm thick below or above GL
M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate 75mm thick as in sub base and the like finished even and fair.
M&L for 40mm thick consolidated sand filling under interlocking paver blocks as cushioning
M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade as in path/hard standing, etc.
Taking down shutters of any description exc 1.00 sqm but n.exc 2 sqm each and refixing in the same opening after necessary repair work.
Taking down shutters of any description n.exc 1.00 Sqm each and refixing in the same opening after necessary repair work.
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar dia of pipe 150 mm
Removing excavated material to a distance exceeding 50 mtr and not exceeding 1.5 km and depositing out of the defence premises at a level up to distance of 1.5 km above the starting point.
Returning, filling in, including spreading, levelling, watering & well ramming in layer s not exc 25 cm complete.
M&L for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested, 150mm bore dia
M&L for 150mm dia reinforced concrete pipes, class NP-2, laid and jointed complete with collars laid and jointed complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
S&F Kitchen cabinet , bottom and wall unit with 19 mm thick plywood Laminates (1mm thick outer, 0.8 mm thick inner), Telescopic channel(voveo or 5X), Adhesive (SR and SH from Fevicol) and Handles (as per 3D designs) and fixing including following kitchen accessories. (a) S&F of oil pull out (Sleek Make) of sizes (4", 6",8") SS304 grade anticorrosive material Life Time warranty ( 1 Nos) (b) S&F of plain basket(Sleek make) of size (15x20x4) SS304 grade anticorrosive material life time warranty (1nos) (c) S&F of plain basket(Sleek make) of size (15x20x6) SS304 grade anticorrosive material life time warranty (1nos) (d) S&F of Thali basket(Sleek make) of size (15x20x8) SS304 grade anticorrosive material life time warranty (1nos) (e) S&F of cup & saucer(Sleek make) of size (15x20x4) SS304 grade anticorrosive material life time warranty (1nos) (f) S&F of cutlery tray(Sleek make) of size (15x20x4) SS304 grade anticorrosive material life time warranty (1nos) (g) S&F of Bin holder(Sleek make) of SS304 grade anticorrosive material life time warranty (1nos) (h) Wall cabinet-Depth of cabinet shall be 35 mm and size will be as per the site conditions. (j) Cabinet below kitchen platform - Depth varies from 45 cm to 75 cm and size will be as per the site condition. Note:- 1. for arriving the area of work face area only will be measured. 2. All the fittings/fixtures mentioned in the item will be inclusive of rate quoted for the work. No separate item will be measured.
Dismantling roof sheeting, and S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Demolition of cement concrete in ground floor or paving not exceeding 15 cm thick below or above GL
M&L for 75mm thick PCC 1:3:6 type C=2 using 40mm graded stone aggregate as in plinth protection.
S&F Bath room PVC cabinet mirror of size 350mm x 450mm (Make : Prayag Cat part No 551 or equivalent)
S&F kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasterners all as specified and directed.
Excavating in trenches n exc. 1.5m wide and n exc. 1.5m in depth, for foundation, etc. or for shafts, wells cesspits, manholes, pier holes, etc. n exc. 10 sqm on plan and getting out in hard/dense soil
Formwork to sides of concrete foundation, sides apron to abutment and wing wall, basement slab with rough finished surfaces of flat concrete complete all as specified.
M&L for RCC M-30 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete
Formwork to sides of pillars, posts, struts, piers, columns, and stanchions rough finished square or rectangular
M&L for RCC M-30 as in columns, pillars, piers, posts and struts
Formwork to sides and soffits of floor or roof beams, Plinth beam, etc.
M&L for RCC M-30 as in Beams, cantilevers, bressummers, lintels over 1.5m span
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)
M&L for RCC M-30 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L for damp proof course 25mm thick in PCC 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork with integral water proofing compound complete all as specified and directed. Note:- WPC to be measured and paid separately
Removing excavated material n exc. 50 m and depositing where directed at a level n.exc 1.50 m above the starting point
M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:6 for floor finishes
M&L for non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth without using extra cement
M&L for coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of external wall surfaces in CM 1:4 mixing with integral water proofing compound complete all as specified and directed. Note:- WPC to be measured and paid separately
M&L for rendering 10mm thick on fair faces of concrete surfaces on ceiling in CM 1:3.
M&L for provide precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate louvers & jallies, 25mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed.
Supply only Integral waterproofing compound
S&F 200mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section
S&F 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21
S&F 150mm size extruded aluminium alloy bow handles, cast type with plate, matt or anodised finish.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash on walls.
M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash.
Preparation of newly plastered external wall surfaces and applying two coats of cement base paint over a coat of primer.
S&F triple layered 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and directed.
S&F 20mm bore ball brass valves high pressure, with polythene float & fly nut complete screwed for iron pipe or brass furrel and fixed.
S&F 15mm bore tubes, medium grade, galvanised with all fitting and fixed complete to walls
All as per item No.151 above but 20mm bore
S&F stop valves 15mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed.
S&F bib taps 15mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule and fixed
S&F pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15mm bore
S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, seat cover etc, complete.
S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe ,
S&F vitreous china wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F PVC (SWR) bends any radius 75mm bore provided with access door.
S&F PVC (SWR) junctions 'T' 75mm bore
S&F PVC (SWR) vent cowl 75mm dia
S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls
S&F PVC (SWR) junctions 'T' 110mm bore
S&F 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc., complete.
M&L for hard core of broken stone or boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface
M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection of 75mm thick
S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sq.m in each pane
M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement
M&L for 32mm bore waste fittings, brass chromium plated for basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed
S&F PVC (SWR) 'S' trap 110/110
S&F white toilet paper holder, box type of vitreous chine fixed to walls with chromium plated (CP) brass screws
S&F plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
S&F towel rail 450mm long of PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats (Min wt 170 gms)
M&L for PCC1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested of 150mm bore.
M&L for Reinforced concrete pipes, of 150 mm dia bore class NP2 , laid and jointed complete with collars.
M&L for rendering 15 mm thick in CM 1:4 on other than fair faced surface of brick work, including finished even and smoothy with using extra cement and mix with WPC 2% by weight of cement Note:- WPC will be measured & paid separately
Extra over forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitered/ stopped ends etc.
M&L for Deformed bars 8 mm to 10 mm dia cut to length, bent to shape required including cranking , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m and getting out in Hard/dense soil as directed.
All as per item No 179 above but depth exc 1.5m but n.exc.3m in depth
All all as per item No 179 above but depth exc 3m but n.exc.4.5m in depth
All all as per item No 179 above but depth exc 4.5m but n.exc.6.0m in depth
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. getting out in soft/ loose soil all as specified and as directed
M&L for PCC 1:2:4 type B-2 using 40mm graded granite stone aggregate in flooring 100mm thick
M&L for PCC 1:2:4 type B-2 using 40mm graded granite stone aggregate as in surface channels.
M&L for broken brick bats in loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells
M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bands, beams and slabs
S&F 110mm dia PVC bend any radius.
Demolition and breaking up 150mm dia (salt glazed ware, AC or Reinforced concrete) pipe jointed in cement mortar and disposed off the premises all as directed.
Reinforced concrete pipes, of 150mm bore class NP-2, laid and jointed complete with collars
Concrete bed with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150 mm bore.
M&L for rendering 10mm thick on fair faces of concrete surfaces in CM 1:6 and finished even and smooth without using extra cement
Formwork to edges of RCC bands slabs etc exc 10 but nexc 20cm wide of rough finished flat surfaces of concrete
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as directed
M&L for wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories or casing capings incl accessories fixed on wall / ceiling or concealed on wall, making good disturbed surfaces of walls and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-
(a) One light point controlled by one switch
(b) One ceiling fan point controlled by one switch and one regulator.
(c) Exhaust fan point controlled by one switch
(d) One 3 pin 5 Amps switch socket on independent board
(e) One 3 pin 5 amps switch socket on same board along with other switches.
(f) One bell point controlled by bell push switch on independent board
(g) One light point controlled by two 2 way switches.
All as per item No.195 herein before but with 4 Sqmm copper conductor with 4.0 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one 15/16 amps on independent board all as directed.
S&F Switch modular flush type 6 amps single pole, one way, 240 Volts
S&F Switch modular flush type 6 amps single pole, two way, 240 Volts
S&F Switch modular bell push flush type 5 amps single pole, 240 Volts
S&F Switch modular flush type 16 amps single pole, one way, 240 Volts, one module.
S&F stepped type electronic fan regulator modular flush type 100 wats, 1 module.
S&F modular socket outlet 6/16 amp, 2 module flush type.
S&F modular socket outlet 5 pin universal, 6 amp, 2 module flush type.
S&F Modular cover plate with frame 3 Module
S&F Modular cover plate with frame 4 Module
S&F Modular cover plate with frame 6 Module
S&F Modular cover plate with frame 8 Module
S&F Modular Metal box flush mounting box 3 Modules
S&F Modular Metal box flush mounting box 4 Modules
S&F Modular Metal box flush mounting box 6 Modules
S&F Modular Metal box flush mounting box 8 Modules
S&F Ceiling rose 6A 240V 3 plates, 3 terminals PVC/Polycarbonate body.
Supply and fix Buzzer, AC, 230 volts, single pole all as specified and directed.
Taking down any type of sub main or power wiring complete upto 4 runs of 10 sqmm aluminium/copper conductor in PVC conduit/Casing capping/batten.
M&L for submain wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25mm dia rigid PVC conduit and conduit accessories incl accessories fixed on wall/ceiling etc., or concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly all as specified and directed.
All as per item No.215 but with 4 runs of 10 sqmm including two runs of 10 sqmm as earth continuity conductor in PVC conduit all as specified and directed. Note for item No.215 & 216: 3/ 6 runs of 6/ 10 sqmm copper conductor/ earth continuity and one run of conduit/casing caping shall be measured and paid as single unit.
S&F rigid non-metallic PVC conduit 20mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.
S&F Lamp holder PVC/Polycarbonate type with back plate batten fittings.
S&F highly efficient LED Bulb 9 W with B 22 caps.
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: Havells cat part No. LUMILINEPLUSBS20WLED865SPCSS/ CROMPTON cat part No.TRIMLINE LDL-20-WW/ HALONIX cat part No- LED AL BATTEN HLB-03-20-CW-AL-HL1.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 volts AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make:- Havells cat No.ENDURA LINEAR NEO BS10WLED 865SPC WH / BAJAJ Cat No. BCLAB SP 10WH/ CRMPTON Cat No. LDLL 10- CDL.
S&F in replacement decorative wall light, stainless steel rust free fixture with white glass diffuser prewired, suitable for 9w LED filament lamp E27 base including LED lamp complete. Make : Havells cat No. FLORETINE WL 1LS E27 SS/Philips cat No. 31425 20-watt/
S&F in replacement of sheet metal enclosure with metal door for MCCB DB triple pole and neutral, double door, 415 volts, 12 way vertical with 200 Amps rated bus bar with provision for MCB/Isolator as incomer and SP MCBs as outgoing all as specified and directed.
S&F RCBO, TPN, 415 volts, 50 Hz, 63 amps, 30mA, 10 KA.
S&F MCB single pole 240 volts, 6 to 40 amps C Curve 10 KA.
Taking down old unserviceable ceiling fan, taken to store including Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.
Removing the existing ceiling fan from site and refxing serviceable ceiling fan after completing painting complete all as specified and directed
M&L for painting of Ceiling fan/ Exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust including marking of MES No complete all as specified and directed
Taking down old unserviceable exhaust fan, taken to store including Supply and fixing of new METAL EXHAUST FAN 300mm sweep with louvres and fly proof, fixing arrangements along with all accessories 230 V complete, including making opening in wall and making good as per existing surface all as specified.
Removing the Exhaust fan from site and refxing the exhaust fan after completing painting and copper point wiring complete all as specified and directed
Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V, 20A.
Removing old building security lights, supply and fixing energy saving LED security light fitting 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.
S&F Switch piano flush type 5 amps single pole, one way, 240 Volts
S&F Switch socket outlet 3 pin, 5 amp, flush type.
S&F MCB single pole 240 volts, 6 to 32 amps all as directed.
S&F MCB SPN (single pole & neutral), 240 volts, 6 to 32 amps all as directed.
S&F Sheet metal enclosure for MCB DB single pole and neutral 240 volts,double door, 4 way with 200 amps rated bus bar.
S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make:- Havells cat No.HEXAFT10WLED 857SSYMBOPC/ PHILIPS Cat No. WT202W LED10S CW PSU S3 PC /BAJAJ Cat No. BIBWP 10W LED.
Supplying, installing and testing of exhaust fan Metal Body 300mm sweep heavy duty 900 RPM complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with three core flexible cable of size 24/0.2mm with copper conductor from ceiling rose to exhaust fan complete all as specified and as directed.
Supply, laying and testing LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) with aluminium conductor, 1100 volts, grade of 2 core 10 Sqmm cross sectional area all as per IS 7098 Part I 1988 complete, laid in trenches, duct, passing through pipe fixed to poles all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and not and getting out soft / loose soil for laying cables / pipes / erection of poles etc.
Supply and lay in trenches river sand/ fine sand clean including spreading / levelling, cushioning for underground cables all as specified and directed. Note:- Punned thickness shall be measured and paid.
Supplying and laying reinforced precast concrete cable cover, class LV, Type 1, flat, size 250 mm x 150mm x 40mm complete.
Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each.
M&L for tubes galvanized medium class including all fittings of size 25 mm dia laid in trenches or fixed in any indicated situation all as required at site and as directed.
Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.
Cutting existing steel tubing 25mm dia bore for alterations or additions (Each cut measured)
Screwing existing steel tubing 25 mm dia bore for alterations or additions (or lengthening screw on pipe to form connector)
Supply and fixing gun metal, globe or gate valves of 25 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete as directed.
M/S MICROAPPS SOFTWARE PRIVATE LIMITED
D Subramani and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .