Provision for extension, raising, resurfacing of Platform & other amenities at Ranital, Nilgiri Road, Khantapara & Bahanagabazar station under the jurisdiction of ADEN/BLS. (2nd Call)

A-Execution of all works covered under Schedule-A 87115909.60 Below/P

B-Execution of all works covered under Schedule-B 60320542.38 Below/P

C-Execution of all works covered under Schedule-C 7770322.88 Below/P

D-Execution of all works covered under Schedule-D 19167059.72 Below/P

E-Execution of all works covered under Schedule-E 1666063.90 Below/P

F-Execution of all works covered under Schedule-F 19396064.07 Below/P

G-Execution of all works covered under Schedule-G 13661490.00 Below/P

Item Breakup - A-Execution of all works covered under Schedule-A

Item Breakup - B-Execution of all works covered under Schedule-B

Item Breakup - C-Execution of all works covered under Schedule-C

Item Breakup - D-Execution of all works covered under Schedule-D

Item Breakup - E-Execution of all works covered under Schedule-E

Unloading of sand / quarry dust during block cum from Railway's wagons other than Hopper wagons by opening the doors of boxes and pulling & pushing down sand with rake irons / phowrahs taking out jammed sand and distributing unloaded sand uniformly over the track. Total 1581456.00

Item Breakup - F-Execution of all works covered under Schedule-F

Extra earth/blanketing material filled in embankment with contractor's rollers of suitable capacity, type and size to achieve specified density as per specification, testing as per IS codes incl. cost of water, T&P consumable material and all labour as a complete job. The work is to be executed as per latest edition of 'Guidelines for earthwork in Railway projects' issued by RDSO, Lucknow. [USSOR-2010 item

Manufacturing, supplying & fixing of pre- Each fabricated RCC coping stone of size 530mm x 1125mm x 100mm thick as per top face designed and approved by site engineer with M-30 grade RCC with 8mm dia tor steel at 150mm c/c both ways and manufactured by vibro compaction process using jointless FRP/GRP steel moulds of required size, shape and design. The item includes cost of cement, reinforcement, transportation etc. (Note: Under layer of cement mortar to be laid as per site conditions & should be paid for separately) [USSOR-2010 item No.048120]

Supplying, erecting and fixing precast Each concrete reinforced bench with back rest. Bench shall consist of 2 nos. L shaped base support in natural cement colour of thickness 100 mm, back height 1000 mm, front height 450 mm, base width 620 mm and 5 nos. reinforced concrete planks in red colour and size of 1500 x 100 x 50mm and 1 no. reinforced concrete plank of 150 x 200 x 50mm; manufactured by using M-30 grade concrete & reinforced suitably; all parts to be joined with galvanised nuts and bolts of suitable size. All bolts to be sealed after assembly. Complete job to be done as per directions of Engineer Incharge. [USSOR- 2010 item

Providing and fixing permanently colour Sqm coated trapezoidal profiled sheet of depth 28-30mm at 195-205mm pitch distance with precisely engineered "Rib & Flute" design. Profiled sheets shall be min. 0.5mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated zincalume / galvalume steel sheet (550 mpa yield strength) having a coating of mass of 150 gsm zinc-aluminium coating AZ-150 total on both sides as per, AS 1397:1993 finished with 20 microns approved colour coating of Silicon Modified Polyester (SMP) /Super Polyester paint coat on exposed surface over a primer coat of 5 microns and a back coat of 5 microns on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins with hexagonal head self drilling suitable fasteners with neoprene /EPDM washer on crests of the sheet. [USSOR-2010 item No.109200] KHARAGPUR DIVISION-ENGG/SOUTH EASTERN RLY

Providing & fixing of coloured galvalume Running plain sheet flashings at ridges / apex Metre junctions of roofing cladding, cover / corner / barge pieces etc. in required shape, colour duly fixed with stitching screws (with EPDM washers etc. as per site requirement) : Upto 600 mm width (girth) [USSOR-2010 item No.109261] Total 16061662.86

Item Breakup - G-Execution of all works covered under Schedule-G

Supply of stone/Quarry Dust and loading cum into any wagons following Railway norms. Measurement to be done at destination. The rate is inclusive of all shrinkage/shrinkage of material including all taxes, loading and lifting. Total 13661490.00