UPGRADATION OF CERTAIN NCs(E) MD ACCN AT AF STN, PROVN OF KOTA STONE IN BLDG NO. P-2 AND PROVN OF HARD STANDING AT OR COOK HOUSE AT GRD UNDER GE (AF) GORKAHPUR

Amount

Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, demolition of mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed.

Roughening cleaning to RCC roof surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-I 20mm graded stone aggregate for level course complete all as specified and directed.

M&L for rendering 15mm thick cement mortar 1:4 on fair face of brick work or concrete surface with liquid WPC @ 150 ml per 50 kg of cement, (WPC will be measured and paid seperately), complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for water proofing treatment to roof surface with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm at cener core) laid over primer @ 0.50 Kg/Sqm surface by torch sealed application complete all as specified and directed.

M&L for cutting groove in brick wall 75mm wide and 65mm deep and shaping horiaontal face of groove with cement Mortar 1:3 for fixing of APP membrane and filling the groove with PCC 1:2:4 type B0 using 12.5mm graded stoen aggregate after inserting membrane complete all as specified and directed.

M&L for 300mm x 300mmx 9-10mm thick size roof cool tile to reduce room temperature, slip resistance , sky blue in colour laid over membrane cement mortar 1:6 and pointing in CM 1:3 over 15mm thick screed bed complete all as specified and directed.Make: Johnson.

Dismantling water tanks exc 500 but n.exc 1000 ltrs and removing to store complete all as specified & directed.

S&F three layered rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub floors/sub base complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.

M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge

Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed.

M&L Rendering 5mm thick in CM 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified as directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.

M & L preparation new plastered surfaces of any description , including cornices and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.

M&L for preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer complete all as specified as directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified as directed.

M&L for Complete removal of existing external surface by Washing, rubbing down and stopping of old distempered and painted surfaces of wall complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10+E35 sqm over new surfaces. complete all as specified and directed.

M & L for preparation of old surfaces of any description , including cornices and applying two coats of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old painted brick or concrete surfaces applying two coats of exterior emulsion (soothing sapphire ) weather coat on surfaces of any description complete all as specified and directed.

M&L for preparation of old distempered and painted surfaces of wall and applying two coats of OBD over 1mm thick Birla/ JK wall care putty complete all as specified and as directed.

M&L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed .

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-Charge.

Taking down wooden chowkhat without taking of shutter from the frame exc 1 but not exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down wooden chowkhat without taking of shutter from the frame n.exc 1.50 Sqm each complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as directed.

S&F factorymade solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specification as specified.

S&F pressed steel frames section 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

M&L for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

S&F factory made 25mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new painted wooden based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F butt hinges medium weight cold rolled mild steel 125mm complete all as specified and directed by Engr-in-Charge.

S&F 125mm aluminium anodised of extruded section barrel tower bolts complete all as specified and directed by Engr-in-Charge.

S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed by Engr-in-Charge.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 140mm overall length of cover plate complete all as specified and directed by Engr-in-Charge.

S&F mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Elixir 2000 Series Windows – Double Rebate Windows Providing & fixing of vajra series windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. (Make: Elixir Met Form Pvt Ltd or equivalent or as approved by concerned GE)

M&L for Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed.

M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A omplete all as specified and directed.

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped,wired and laid in position, including closing after filling complete all as spcified and directed.

M&L preparation of new painted steel surfaces of any description, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed .

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers but of anodised aluminium alloy etc complete al as specified and directed.

S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket and making good all connections complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed.

S&F in repairs 15 mm bore PVC connection 600 mm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F in repair brass chromium plated shower rose 125mm size size fixed to pipe all as specified and directed.

S & F in repair for towel rail 600mm long complete all as specified and directed.

S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed.

S&F in repairs 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.

S&F in repairs brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed.

S&F in repair stop valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Gun-metal, globe 20 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S & F in repairs 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.

Taking down eaves gutters and rainwater PVC/CI pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr-in-Charge.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .

S&F for 110mm bore PVC (SWR) bends provided with access door all as specified & directed .

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .

S&F for 75mm bore PVC (SWR) bends provided with access door all as specified & directed .

S&F in repairs Cast iron pipes 100mm with spigot and socket ends, vertically cast, class A, in any length complete all as specified directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing and including 20mm thick screed bed in CM 1:6. Note:- Kota to be used in single piece in staircase complete all as specified and directed by Engr in Charge.

M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed in cm 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as directed and as specified by Engineer-in-charge. .

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' brick straight or curved on plan 6m mean radious built in CM (1:4) etc as directed .

S&F in repairs stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm complete all as directed .

S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long all as specified.

M&L Chequered cement concrete tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor over applying screed bed or beding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes. all as specified and directed.

M&L for Plain cement concrete (1:2:4) type B-O, using 12.5mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and directed by Engr-in-Charge.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendereing, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150mm complete all as specified.

Surface Excavation n exc 15 cm deep and getting out of soft and loose soil complete all as specified and directed by Engr-in-Charge.

Removing excavated soil to a distance exc 250 m but n.exc 500 m and deposited where directed at a level n exc 1.5 above the starting point complete all as specified and directed by Engr-in-Charge.

M & L for 100 mm Hard core of broken stone or boulder guage n. exc. 63mm deposited, spread and levelled in layers n exc, 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm PCC 1:4:8 type D-2 (using 40mm stone aggregate) as in subbase of floor etc complete all as specified and directed by Engr-in-Charge.

Surface dressing n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/ loose soil complete all as specified and directed by Engr-in-Charge.

M&L hard core of broken stone or boulder guage exc. 63mm but n exc. 100mm deposited, spread and levelled in layers n exc, 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for 100mm PCC 1:4:8 type D-2 (using 40mm stone aggregate) as in subbase of floor etc complete all as specified and directed by Engr-in-Charge.

M & L 50mm PCC 1:2:4 type B1 (20mm graded stone aggregate) as in flooring laid in suitable pannel over subbase all as specified and directed.

M&L Glass dividing strip 4 mm thick 38 mm wide fixed in pannel complete all as specified and directed by Engr-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge.

Taking down carefully Old unserviceable aluminium sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed by Engineer in charge.

Taking down carefully Main switch and Distribution boards any make and size .and making good the disturbed surfae all as required and directed at site

Taking down and Re fixing carefully Exhaust Fan of any sweep and size compete with repacement of connecting wire and painting the exhaust fan with grey colour all as required and directed at site

M/L for Sub Main Wiring with Two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and 6 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two run of 6 sq mm Wire and One run of 6 Sqmm Earth wire in One RM length Measured as one unit length.

M/L for Sub Main Wiring with Two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and 4 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two run of 4 sq mm Wire and One run of 4 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including GI sunken box terminal boxes duly painted with two coats of anti-corrosive paint in side and inner and outer cover for mounting ofmodular switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire including sunken box and modular plate and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge. (a) One light point controlled by one switch.

(b) One fan point controlled by one switch complete all as specified and directed by Engineer in charge.

(c One socket point controlled by one switch on same board complete all as specified and directed by Engineer in charge.

(d) One socket point controlled by one switch on Independent board complete all as specified and directed by Engineer in charge.

Description all as per item No 106 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet15Amp independent board complete all as specified and directed by Engineer in charge .

Supply and fixing BLDC ceiling fans complete with blades, with remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete with anti sucide fan rod complete with hanging a as required and direted at site Make Haves/Bajaj/Crompton

Taking down old ceiing fan after disonnecting and deposited to E/M yard all as required and directed

S&F Single pole and neutral enclosure with a two pin and earth plug and socket 240V complete with one single pole MCB 20 Amps 'C' series complete all as specified and directed by Engineer in charge.

Supply & fix exhaust fans AC single phase 230V of size 300 mm sweep with blades,fans and louver with making the hole on wall and makng good the disturbed surface as required and directed at site.

Taking down old exhaust fan 300 mm sweep after disonnecting and deposited to E/M yard all as required and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete with making the hole on wall and makng good the disturbed surface a as required and directed at site.

M/L for modular switch 1 module AC 230 volts 10 Amps single pole one way complete all as specified and directed by Engineer in charge. Make- Anchor, Plzaa, Leader.

M/L for Modular Socket, 6A - 2/3 pin combined 2 module AC 230 volts complete all as specified and directed by Engineer in charge Make- Anchor, Plzaa, Leader.

M/L for Modular Socket, 6A/16A - 2/3 pin combined 2 module AC 230 volts complete all as specified and directed by Engineer in charge Make- Anchor, Plzaa, Leader.

M/L for modular switch 1 module AC 230 volts 16 Amps single pole one way complete all as specified and directed by Engineer in charge. Make- Anchor, Plzaa, Leader.

M/L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge Make- Anchor, Plzaa, Leader.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F rechargeable emergency inverter LED batten 20 watt compact 3-feet LED batten/tubelight,cool daylight with backup of 3 hrscomplete with fixing on wall all as directed by ENG in charge

S/F LED building security light fitting 10 watt LED flood light model BVP 131 of PHILIPS or equivalent complete with GI bracket clamps nut bolts a as required and directed at site all as specified and directed by Engineer in charge.

S & F Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door with mounting fus on wall complete all as specified and directed by Engineer in charge Make- Legrand cat part No.- 607715 , L&T, ABB.

S & F Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double doormounting flus on wall complete all as specified and directed by Engineer in chargeMake- Legrand,L&T,ABB

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning(i) TPN/FP 40 to 100 AMP

S & F of MCB, double pole, 40 Ampere breaking capacity 10 KA, 240 volts with and including taking down old unserviceable one complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning (i) SP 5 To 32 AMP

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as required and directed

Taking down old water heater after disonnecting and deposited to E/M yard all as required and directed

Taking down the electric meter after disconnecting the connection and refixing the same with sealling all as required and directed at site

M/S SHAILZA TRADERS (BID ID -3143921)

M/S SHRI RC YADAV (BID ID -3143352)

GANGA TRADERS (BID ID -3144417)

M/s Suresh Traders (BID ID -3143788)

H AND Y GROUP (BID ID -3142768)