Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.5 LAccepted-AOC 439 D DEFENCE COLONY JAJMAU KANPUR 208010 | KANPUR NAGAR | UTTAR PRADESH | 208010 | L1 | Accepted-AOC Found lowest bidder | |
| 2 | L2₹47.0 L+₹3.1 L (7.03%)Rejected-Finance NOT SPECIFIED | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹49.7 L+₹5.8 L (13.3%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest | |
| 4 | Rejected-Technical | - | Rejected-Technical Not recommended for opening of finanical bid, as firm has not uploaded residual work load in terms of NIT note No 1. In this connection also ref HQ CWE Meerut letter No. 9102/Contracts/14/E8 datedd 31 Oct 2023 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Meerut Cantt
GE (North) Meerut Cantt
REPAIR TO MISC FURNITURE ARTICLES HELD ON CHARGE OF BSO (NORTH) UNDER GE (NORTH) MEERUT CANTT
2023_MES_622188_1
8449/E8
Open Tender
Civil Works - Others
Item Rate
180 days
Meerut
Class D category d (i)
8 documents required · 8 mandatory
₹500
GE (North) Meerut Cantt
₹90,000
Yes
15 Jan 2024
7 Oct 2023
6 Nov 2023
7 Oct 2023
4 Nov 2023
21 Oct 2023
Amount
BED PLY TOP (Drg No FD-246 & 247) Removing of old unserviseable plywood top from Bed ply top and S&F new top of same size of 12mm thick ply wood (ISI marked) , BWR grade of appropriate size with screws complete all as per drawing, as specified and as directed
Removal of old unserviceable long rail from bed and S&F new long rail with rounded edges of size 1980 mm x 90mm x 35 mm of hard wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as per drawing, as specified and as directed
All as per srl item No. 1.01 here-in-before but short rail of size 60mm x 60mm of suitable length complete all as per drawing, as specified and as directed
All as per srl item No. 1.01 here-in-before but stiffener of size 60mm x 60mm of suitable length complete all as per drawing, as specified and as directed
Removing of old unserviceable ply wood from the existing head rest of Bed ply top and S & F new OSTF plywood 04mm thick ISI marked, BWR grade to both sides of head rest including 04mm thick teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as per drawing, as specified and as directed
All as per srl item No 1.04 here-in-before but foot rest complete all as per drawing, as specified and as directed
Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of Ist class hard wood including provision of 04 mm thick one side teak faced plywood and teak wood beading 04 mm thick as per shape and size shown in drawing and fixed with nails duly french polished with both side MNF arrangement and fixing the same complete all as per drawing, as specified and as directed
BIN LINEN MULTI PURPOSE (Drg No FD/E6/MAP/09) Removing of old unserviceable top from bin linen multipurpose and S&F new top made out of 17/18 mm thick MDF board duly post formed of colour / shade as approved by GE complete all as per drawing, as specified and as directed
Removing of old and unserviceable door shutters of bin linen multipurpose and S&F of new door shutters made of 17/18 mm MDF Board with 04mm thick teak wood beading all around as per size and design complete all as per drawing, as specified and as directed
Removing of old unserviceable hingses and S&F of new hinges to bin linen multipurpose as per size and design shown on drg complete all as per drawing, as specified and as directed
Removing of old broken handles and S&F of new chromium plated steel handles to bin linen multipurpose as per shown on drg complete all as per drawing, as specified and as directed
Removing of old magnetic catcher and S&F of new magnetic catcher to bin linen multipurpose as per size and design shown on drg complete all as per drawing, as specified and as directed
CHAIR DINING (Drg No FD--203/228/279/1105) M&L for removal of unserviceable back leg of chair in any position and, S&F new back leg made out of 1st class hard wood (teak wood) complete all as per drawing, as specified and as directed
All as per Srl item No 3.00 here-in-before but front leg complete all as per drawing, as specified and as directed
All as per Srl item No 3.00 here-in-before but side rail complete all as per drawing, as specified and as directed
All as per Srl item No 3.00 here-in-before but front/ back rail complete all as per drawing, as specified and as directed
All as per Srl item No 3.00 here-in-before but stiffner complete all as per drawing, as specified and as directed
All as per Srl item No 3.00 here-in-before but back strip complete all as per drawing, as specified and as directed
S & F new hard PVC/rubber shoe/ring with suitable screws for fixing complete all as per drawing, as specified and as directed
CHAIR DINING ORs (MAP) (FD/MAP-II/04) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as per drawing, as specified and as directed
All as per Srl item No 4.00 here-in-before but front leg complete all as per drawing, as specified and as directed
All as per Srl item No 4.00 here-in-before but side rail complete all as per drawing, as specified and as directed
All as per Srl item No 4.00 here-in-before but front/ back rail complete all as per drawing, as specified and as directed
All as per Srl item No 4.00 here-in-before but stiffner complete all as per drawing, as specified and as directed
All as per Srl item No 4.00 here-in-before but back strip complete all as per drawing, as specified and as directed
S & F new hard PVC/rubber shoe/ring with suitable screws for fixing complete all as per drawing, as specified and as directed
Removing of old unsv / torn out PVC seats from chairs and providing holes all round on top of rails in equal distance for caning complete all as per drawing, as specified and as directed
CHAIR EASY (Drg No 229) M&L for removal of unsv back leg of chair in any position and S&F new back leg made of 1st class hard wood (teak wood) complete all as per drawing, as specified and as directed
All as per Srl item No 5.00 here-in-before but front leg complete all as per drawing, as specified and as directed
All as per Srl item No 5.00 here-in-before but side rail of seat frame complete all as per drawing, as specified and as directed
All as per Srl item No 5.00 here-in-before but front or back rail of seat frame complete all as per drawing, as specified and as directed
All as per Srl item No 5.00 here-in-before but side rail of back frame complete all as per drawing, as specified and as directed
All as per Srl item No 5.00 here-in-before but top or bottom rail of back frame complete all as per drawing, as specified and as directed
All as per Srl item No 5.00 here-in-before but replacement of arm rest complete all as per drawing, as specified and as directed
S&F new hard PVC / rubber shoe/ring with suitable screws for fixing complete all as shown on drg complete all as per drawing, as specified and as directed
RECANNING TO DIFFERENT TYPES OF CHAIR (Drg No FD-279, 229, 281) Recanning of wooden chair of different sizes (Eg :- Chair Dining,Chair writing,Chair Easy,Stool Dressing CB etc.) with 2mm wide cane having 3mm wide plastic cane border in Godrej pattern complete all as per drawing, as specified and as directed
HAT STAND WITH MIRROR (Drg No FD-233) Removing old broken/unserviceable teak plywood from front frame of hat stand and S&F new 04mm thick OSTF commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as per drawing, as specified and as directed
Removing of old unserviceable aluminium/ brass pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) to hat stand complete all as per drawing, as specified and as directed
PEG TABLE (Drg No FD-277) Removing of old unserviceable top from peg table and supply and fixing new top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed.
Removing of old unserviceable leg from existing peg table and S&F the same size new leg made out of Ist class hard wood teak to Peg table duly french polished complete all as per drawing, as specified and as directed
All as per Srl item No 8.01 here-in-before but long top rail complete all as per drawing, as specified and as directed
All as per Srl item No 8.01 here-in-before but short/ bottom rail complete all as per drawing, as specified and as directed
All as per Srl item No 8.01 here-in-before but stiffener of Peg table complete all as per drawing, as specified and as directed
SOFA SET 05 SEATER WITH CUSHION (Drg No FD-281 / FD/MAP-II/02) S&F foam cushion of size 22" x 21" of thickness 100mm and 40 density complete all as per drawing, as specified and as directed
Removal of tapestry cloth from existing foam cushion of seat/ back of Sofa set 04 seater and providing new cover of foam cushion (tapesty cloth DCM/ Handloom long cloth) of approved shade of Indian make of rate not less than Rs. 350/- per meter duly stitched and fixing the same all as per drawing. The cover shall be removable duly provided with ZIP/ Velcro as directed complete all as per drawing, as specified and as directed
TABLE DINING 6 PERSONS (Drg No FD/E6/MAP/03 ) M&L for removal of Old unserviceable top of table in any position and S&F new top made out of 17/18 mm thick MDF board of colour / shade for table dining 6 persons complete all as per drawing, as specified and as directed
All as per srl item No 10.00 here-in-before but long rail for Table Dinging 6 Person complete all as per drawing, as specified and as directed
All as per srl item No 10.00 here-in-before but short rail complete all as per drawing, as specified and as directed
S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as per drawing, as specified and as directed
TABLE 3’ x 3’ (900 x 900 x 760 mm) (Drg No FD-291) or similar Removal Old unserviceable top of table in any position and S&F new top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top for Table dining 4 persons complete all as per drawing, as specified and as directed
All as per srl item No 11.00 here-in-before but leg made out of 1st class hard wood complete all as per drawing, as specified and as directed
All as per srl item No 11.00 here-in-before but rails complete all as per drawing, as specified and as directed
S&F bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as per drawing, as specified and as directed
TEAPOY (Drg No FD-34/ 232/ 278/ 382) Removal of Old unserviceable top of table top in any positioned and S&F top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed
All as per srl item No 12.00 here-in-before but leg made of 1st class hard wood complete all as per drawing, as specified and as directed
All as per srl item No 12.00 here-in-before but long rail complete all as per drawing, as specified and as directed
All as per srl item No 12.00 here-in-before but short rail complete all as per drawing, as specified and as directed
All as per srl item No 12.00 here-in-before but stiffner complete all as per drawing, as specified and as directed
S&F hard PVC shoe/ ring with suitable screws for fixing complete all as per drawing, as specified and as directed
TABLE 900 x 600 mm with / without drawer (Drg No) FD-223/ 224/ 283/ 284) Removal of unsv top of table in any position and S&F top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed
All as per srl item No 13.00 here-in-before but leg made out of 1st class hard wood complete all as per drawing, as specified and as directed
All as per srl item No 13.00 here-in-before but replacement of long rail complete all as per drawing, as specified and as directed
All as per srl item No 13.00 here-in-before but replacement of short rail complete all as per drawing, as specified and as directed
All as per srl item No 13.00 here-in-before but replacement of drawer with fittings complete all as per drawing, as specified and as directed
All as per srl item No 13.00 here-in-before but replacement of bottom centre stiffener complete all as per drawing, as specified and as directed
All as per srl item No 13.00 here-in-before but replacement of bottom side stiffner complete all as per drawing, as specified and as directed
S & F hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge. complete all as per drawing, as specified and as directed
TABLE DRESSING LADIES WITH MIRROR (Drg No FD-251/ FD/MAP-II/07) or similar Removing of old unserviceable looking mirror from table dressing ladies and S&F looking mirror of size 1200 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete all as per drawing, as specified and as directed
Removing old broken/unserviceable knob/ handle from table dressing ladies and S&F new 40 mm size CP brass knob as per shape and size shown in drawing complete all as per drawing, as specified and as directed
Removing old broken/unserviceable sliding glass from table dressing ladies and S&F 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as per drawing, as specified and as directed
Removing old broken/unserviceable legs from table dressing ladies and S&F legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as per drawing, as specified and as directed
Removing old broken/unserviceable sunmica from the top of table dressing ladies and S&F 1.5 mm thick sunmica of best quality fixed with fevicoal as per shape and size shown in drawing complete all as per drawing, as specified and as directed
Removing old broken/unserviceable sunmica from the drawer of table dressing ladies and S&F 1.5 mm thick sunmica of best quality fixed with fevicoal as per shape and size shown in drawing complete all as per drawing, as specified and as directed
TABLE CENTRE (Drg No FD No -274) Removing of old unserviceable top from table centre and S&F new top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed.
Replacement of old unserviceable leg from existing table centre and S&F the same size leg made out of Ist class hard wood teak to table centre duly french polished complete all as per drawing, as specified and as directed
All as per srl item No 15.01 here-in-before but long rail complete all as per drawing, as specified and as directed
All as per srl item No 15.01 here-in-before but short rail complete all as per drawing, as specified and as directed
All as per srl item No 15.01 here-in-before but stiffener of table centre complete all as per drawing, as specified and as directed
Chair Dining Offrs (MAP) (Drg No FD/E6/MAP/04) Removal of old unserviceable back leg of chair in any position, S&F back leg made of 1st class hard wood (teak wood) complete all as per drawing, as specified and as directed
All as per srl item No 16.00 here-in-before but front leg complete all as per drawing, as specified and as directed
All as per srl item No 16.00 here-in-before but side rail complete all as per drawing, as specified and as directed
All as per srl item No 16.00 here-in-before but front/ back rail complete all as per drawing, as specified and as directed
All as per srl item No 16.00 here-in-before but stiffner complete all as per drawing, as specified and as directed
All as per srl item No 16.00 here-in-before but back strip complete all as per drawing, as specified and as directed
Removal of old unserviceable seat of chair, S&F foam cushion 4" thick (ISI Marked IS-1741) 40 density for seat and covered with superior quality rexine / cloth, fixed with removable 12mm BWR grade commercial ply wood complete all as per drawing, as specified and as directed
TABLE WRITING (Drg No FD-33, FD-275) Removing of old unserviceable top from table writing and S&F new top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed
Replacement of Legs of to be made out of Ist class Teak wood well seasoned and S&F as per drg complete all as per drawing, as specified and as directed
Removal of old unserviceable stiffness and S&F Stiffnes Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned complete all as per drawing, as specified and as directed
Removal of old unserviceable stiffner and S&F stiffner made out of 17/18 mm thick prelaminated MDF Board covered with all round 4 mm thick teak wood beading and duly fixed with knobs and piano type hinges 4 mm thick including 4 lever 40 mm brass lock complete all as per drawing, as specified and as directed
Removal of old unservicebale back of table writing and S&F back of table writing which shall be made out of 06 mm thick commercial ply wood ISI marked complete all as per drawing, as specified and as directed
Removal of old unservicebale drawer of table writing and S&F Drawers of table writing to be made out of 18mm thick prelaminated MDF Board exterior grade ISI marked and 4 mm thick beading teak wood to be fixed and provided one knob complete all as per drawing, as specified and as directed
Removal of old unservicebale PVC shoe of table writing and S&F Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked complete all as per drawing, as specified and as directed
BED HARD STEEL :- (Drg No FD - E6/MAP/08(R) Removing of old and unserviceable Ply top from Bed Hard and S&F new 12mm thick ply top of suitable size, ISI marked, BWR phenol bonded plywood of unpolished edging of approved quality and as directed. complete all as per drawing, as specified and as directed.
Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18 mm thick prelaminated particle board both side teak faced having 04 mm thick teak wood beading all around complete all as per drawing, as specified and as directed.
All as per Srl item No 18.01 here-in-before but foot board of Bed hard complete all as per drawing, as specified and as directed.
S&F in replacement hard rubber shoes at each corner of long rail of Bed hard steel complete all as per drawing, as specified and as directed.
S&F in replacement hard rubber shoes at the top of leg of Bed hard steel complete all as per drawing, as specified and as directed.
S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel complete all as per drawing, as specified and as directed.
M&L for Welding to broken joints of bed hard complete all as per drawing, as specified and as directed.
CHAIR VERANDAH :- (Drg No FD - 359 & 256) Cutting and removing of old cane from Chair verandah and preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04 mm wide of approved quality in Godrej Pattern complete all as per drawing, as specified and as directed.
M&L for Welding to broken joints of Chair verandah complete all as per drawing, as specified and as directed.
S&F in replacement PVC shoes to Chair Verandah complete all as per drawing, as specified and as directed.
CHAIR VERANDAH (MAP) :- (Drg No FD - MAP-II/06, MAP-II/15) Cutting and removing of old / unserviceable PVC Sheet from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04 mm wide of approved quality in Godrej Pattern complete all as per drawing, as specified and as directed.
M&L for Welding to broken joints of Chair verandah complete all as per drawing, as specified and as directed.
S&F in replacement PVC shoes to Chair Verandah complete all as per drawing, as specified and as directed.
CHAIR COMPUTER :- (Drg No FD - E/6/MAP/01) M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screws and covered with 40mm thick U foam over shape and tapestry cloth. Fixing shall be all as per drawing and including all minor repairs and welding etc. complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as per drawing, as specified and as directed.
M&L for Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Computer and S&F new tapestry cloth to seat and back of Chair Computer (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as per drawing, as specified and as directed.
M&L for Replacement of unserviceable hydraulic system of Chair Executive for the adjustment of height complete all as per drawing, as specified and as directed.
M&L for Replacement of old, unserviceable/ broken wheel base of Chair Executive complete all as per drawing, as specified and as directed.
Removing old/unserviceable twin castor wheel from chair and S&F new twin wheel castors as per existing shape and size complete all as per drawing, as specified and as directed.
M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as per drawing, as specified and as directed.
CHAIR WRITING :- (Drg No FD - E6/MAP/12) M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed to frame with screw and covered with 40mm thick U foam over shape and tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with welding to steel frame etc (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter and as per sample approved by GE.) complete all as per drawing, as specified and as directed.
M&L for Removing of old/ unserviceable tapestry cloth from seat and back of existing Chair Writing and S&F new tapestry cloth to seat and back of Chair Writing (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as per drawing, as specified and as directed.
M&L for Welding to broken joints of Chair writing complete all as per drawing, as specified and as directed.
S&F in replacement hard PVC shoes to Chair writing . complete all as per drawing, as specified and as directed.
M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as per drawing, as specified and as directed.
TEAPOY VERANDAH :- (Drg No FD - 255) M&L for Removing of old unserviceable top from Teapoy Verandah and new top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed.
M&L for Replacement of unserviceable flat iron frame with FI 25 x 5 mm thick of required size as per drg. The fixing and finishing shall be done in accordance with drawing specifications complete all as per drawing, as specified and as directed.
M&L for Welding to broken joints of Teapoy verandah complete all as per drawing, as specified and as directed.
S&F in replacement PVC shoes to Teapoy verandah complete complete all as per drawing, as specified and as directed.
TEAPOY VERANDAH :- (Drg No FD - E6/MAP/17) Removing of old unserviceable top from Teapoy Verandah and S&F of new top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed.
M&L for Welding to broken joints of Teapoy verandah complete all as per drawing, as specified and as directed.
S&F in replacement PVC shoes to Teapoy verandah complete complete all as per drawing, as specified and as directed.
Removing of old/unserviceable jali from existing Teapoy Verandah and S&F new Jali including two coat of synthetic enamel paint (black in colour) complete all as per drawing, as specified and as directed.
TABLE BED SIDE (OFFICERS) :- (Drg No FD - E6/MAP/15(R) M&L for Replacement of Upper drawer made out of 17/18 mm thick MDF board, and provided with 6mm thick bottom plywood of BWR grade complete all as per drawing, as specified and as directed.
M&L for Replacement of Lower drawer made of 17/18 mm thick MDF board, and provided with 6mm thick bottom ply BWR grade & telescopic channel of best quality complete all as per drawing, as specified and as directed.
M&L for Removing of old unserviceable top from table bed side and new top made out of 17/18 mm MDF board with teak faced with 04mm thick teak wood beading complete all as per drawing, as specified and as directed.
All as per Srl item No 67.00 here-in-before but side of table bed side complete all as per drawing, as specified and as directed.
Removing of old unserviceable back ply of table bed side and S&F new back ply of same size made out of 06mm thick plywood and as directed by Engineer-in-Charge.
S&F Removing of old/unserviceable handle from the table bed side and supply and fixing new CP steel handle 100mm long as per sample, shape and size all as per drawing and as directed by Engr-in-charge.
LOCKER BED SIDE STEEL :- (Drg FD - 257) M&L for Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drg complete all as per drawing, as specified and as directed.
M&L for Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle complete all as per drawing, as specified and as directed.
M&L for Replacement of unserviceable conduit pipe with new CP steel conduit pipe of suitable size of 20mm dia having wall thickness 1.25mm to locker steel complete all as per drawing, as specified and as directed.
M&L for Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipes complete all as per drawing, as specified and as directed.
S&F Removing of old unserviceable foot rest from locker bed side steel and new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray machine over a coat of primer after preparation of surfaces complete all as per drawing, as specified and as directed.
All as per item Sl No 26.04 above here-in -before but bottom sheet of locker bed side steel complete all as per drawing, as specified and as directed.
Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65 mm long with gas welding / reviting complete complete all as per drawing, as specified and as directed.
CHAIR REVOLVING LOW BACK (STEEL) :- (Drg No FD - TP) M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality covered with 75mm thick U foam and the back shall be 6mm thick plywood commercial quality fixed on frame with screws and covered with 40mm thick U foam over shape and tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs and welding etc (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE.) complete all as per drawing, as specified and as directed.
Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Revolving and S&F new tapestry cloth to seat and back of Chair Revolving (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE) complete all as per drawing, as specified and as directed.
M&L for Replacement of unserviceable hydraulic system of Chair revolving with new one for the adjustment of height complete all as per drawing, as specified and as directed.
M&L for Replacement of old ,unserviceable / broken wheel base of Chair revolving complete all as per drawing, as specified and as directed.
Removing old/unserviceable twin castor wheel from chair and S & F new twin wheel castors as per shape and size complete all as per drawing, as specified and as directed..
M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as per drawing, as specified and as directed.
CHAIR SCHOOL WITH HAND BOARD :- (Drg No FD - E6/MAP/05) Removing old/unserviceable one piece PVC seat & back from chair school with hand board and S & F new one piece PVC seat and back of best quality as per shape and size shown in drawing complete all as per drawing, as specified and as directed.
Removing old/unserviceable hand board top from chair school with hand board and S&F new top of 17/18mm thick MDF board of colour / shade as approved by GE with PVC edging and screw to 25 mm hollow steel pipe inserted in 20 mm complete all as per drawing, as specified and as directed.
M&L for Welding to broken joints of Chair school with hand board complete all as per drawing, as specified and as directed.
S&F in replacement PVC shoes to Chair school with hand board complete complete all as per drawing, as specified and as directed.
CHARPOY WITH HARD TOP :- (Drg No FD - MAP-II/01) Removing of old and unserviceable Ply top from Charpoy with hard top and S&F of new 12 mm thick plywood of suitable size, ISI marked, BWR phenol bonded plywood with unpolished edging of approved quality complete all as per drawing, as specified and as directed..
S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown complete all as per drawing, as specified and as directed.
TABLE COMPUTER Removing of old unserviceable top from Table computer and supply and fixing new top made out of 17/18 mm thick MDF board of colour / shade complete all as per drawing, as specified and as directed.
Removing of old unserviceable bottom from Table computer and supply and fixing the new bottom of same size made out of 17/18 mm thick MDF board with all round PVC edging complete all as per drawing, as specified and as directed.
All as per Srl item No 30.01 here-in-before but vertical board on side of Table computer complete all as per drawing, as specified and as directed.
All as per Srl item No 30.01 here-in-before but keyboard tray of Table computer complete all as per drawing, as specified and as directed.
All as per Srl item No 30.01 here-in-before but drawer of Table computer complete all as per drawing, as specified and as directed.
All as per Srl item No 30.01 here-in-before but pull out mouse tray of Table computer complete all as per drawing, as specified and as directed.
Removing of old unserviceable telescopic channel of key board and supply and fixing new stainless steel telescopic channel to Table computer complete all as per drawing, as specified and as directed.
All as per Srl item No 30.06 here-in-before but telescopic channel for drawer of Table computer complete all as per drawing, as specified and as directed.
All as per Srl item No 30.06 here-in-before but telescopic channel for pull out mouse tray of Table computer complete all as per drawing, as specified and as directed.
S&F new Nylon buffers to Table computer complete all as per drawing, as specified and as directed.
S&F new knobs to Table computer complete all as per drawing, as specified and as directed.
Polishing M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as per drawing, as specified and as directed. (Drg No FD-273 / FD/E6/MAP/03) (i) Table Dining 06 Person
Table Dining 06 Person (Drg No FD-273 / FD/E6/MAP/03)
Table Dining 1200 x900 (JCOs/OR) complete all as per drawing, as specified and as directed (Drg No FD/E6/MAP/03)
Peg Table complete all as per drawing, as specified and as directed (Drg No FD-277)
Table 3' x 3' (900 x 600 x 760 mm) complete all as per drawing, as specified and as directed (Drg No FD-291)
Table 900 x 600 mm with / without drawer complete all as per drawing, as specified and as directed. (Drg No FD-223/ 224/ 283/ 284)
Table Centre complete all as per drawing, as specified and as directed (Drg No FD-274)
Table dressing Ladies with mirror complete all as per drawing, as specified and as directed (Drg No FD-251/ FD/MAP-II/07)
Table Writing complete all as per drawing, as specified and as directed (Drg No FD - 275)
Chair Dining FD & MAP (ORs) complete all as per drawing, as specified and as directed (Drg No FD - 279 / FD/MAP-II/04)
Side Board complete all as per drawing, as specified and as directed (Drg No FD-241)
Sofa Set 05 seater with cushion complete all as per drawing, as specified and as directed(Drg No FD-281)
Chair Dining Offrs (MAP) complete all as per drawing, as specified and as directed(Drg No FD/E6/MAP/04)
Bed Ply Top complete all as per drawing, as specified and as directed (Drg No FD-246 & 247)
Bin Linen Multipurpose complete all as per drawing, as specified and as directed (Drg No FD/E6/MAP/09)
Hat Stand with Mirror complete all as per drawing, as specified and as directed (Drg No FD-362)
Teapoy complete all as per drawing, as specified and as directed (Drg No FD-278)
Chair Dining, FD - 279 / FD/MAP-II/04 complete all as per drawing, complete all as per drawing, as specified and as directed (Drg No FD-17(M)/ 201/ 229/ 281)
PAINTING :- M&L for removing existing paint by application of paint remover / grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint (hammer tone / dual tone) make/colour/ shade as approved by GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the following steel furniture items (internally & externally complete) :- Almirah large steel complete all as per drawing, as specified and as directed.
(Drg No :- FD/E6/MAP/18) All as per Srl item No 129.00 here-in-before but Almirah large steel 1/2H,1/2S complete all as per drawing, as specified and as directed.
(Drg No :- FD-1032) All as per Srl item No 129.00 here-in-before but Almirah medium steel
(Drg No :- FD/E6/ MAP/ 18(R) All as per Srl item No 129.00 here-in-before but Bed hard steel (MAP) complete all as per drawing, as specified and as directed.
(Drg No :- FD-388(R) All as per Srl item No 129.00 here-in-before but Charpoy IP folding with hard top complete all as per drawing, as specified and as directed.
Drg No :- (FD/MAP/II/01) All as per Srl item No 129.00 here-in-before but Charpoy IP Hard Top (MAP) complete all as per drawing, as specified and as directed.
Drg No :- (FD/E6/MAP/12) All as per Srl item No 129.00 here-in-before but Chair Writing (MAP) complete all as per drawing, as specified and as directed.
Drg No :- (FD/238) All as per Srl item No 129.00 here-in-before but Ladder for loft (steel) complete all as per drawing, as specified and as directed.
Drg No :- (FD/E6/MAP/02(R) All as per Srl item No 129.00 here-in-before but Rack shoe steel complete all as per drawing, as specified and as directed.
Drg No :- (FD-255) All as per Srl item No 129.00 here-in-before but Teapoy Verandah complete all as per drawing, as specified and as directed.
Drg No :- (FD/E6/MAP/17) All as per Srl item No 129.00 here-in-before but Teapoy Verandah (MAP) complete all as per drawing, as specified and as directed.
Drg No :- (FD/E6/MAP/05) All as per Srl item No 129.00 here-in-before but Chair School with Hand Board complete all as per drawing, as specified and as directed.
Drg No :- (FD/E6/MAP/15(R) All as per Srl item No 129.00 here-in-before but Table Bedside (Steel) complete all as per drawing, as specified and as directed.
Drg No :- (FD-1003) All as per Srl item No 129.00 here-in-before but Table Office Officer's Steel complete all as per drawing, as specified and as directed.
Drg No :- (FD-1004) All as per Srl item No 129.00 here-in-before but Table Office Clerk Steel complete all as per drawing, as specified and as directed.
Drg No :- (FD-257) All as per Srl item No 129.00 here-in-before but Locker Bed Side Steel complete all as per drawing, as specified and as directed.
M/S AMAR ELEKTRO CENTRE
Sunny Furniture Centre
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .