Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC 4 S1 A 405 ZODAIC MARATHON NEXZONE NH4 PALASPE PHATA REES RAIGAD MAHARASHTRA 410 206 | RAIGAD | MAHARASHTRA | 410206 | ₹21.6 L Quoted ₹23.2 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹23.9 LRejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | ₹23.9 L | L2 | Rejected-Finance Other than lowest bidder |
| 3 | L3₹24.9 LRejected-Finance | ₹24.9 L | L3 | Rejected-Finance Other than lowest bidder |
| 4 | L4₹25.4 LRejected-Finance | ₹25.4 L | L4 | Rejected-Finance Other than lowest bidder |
| 5 | L5₹28.7 LRejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | ₹28.7 L | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | Anil Industrial Corporation L5 | SN CONSTRUCTION L2 | Nilesh Construction L8 | Angrahit Services Trading Co L4 | K.C.P ENTERPRISES L3 | I.J Enterprises L9 | SHIV ENTERPRISE L7 | ASHOK CONSTRUCTION L6 | JANKI ENTERPRISES L1 | SR Construction L10 | GANGAJAL L11 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling old rusted CGI sheets from roof, gate and walls of the hanger complete all as specified and as directed | 1,280 | Sqm | 5 ₹6,400 | 10 ₹12,800 | 8 ₹10,240 | 15 ₹19,200 | 8 ₹10,240 | 5 ₹6,400 | 35 ₹44,800 | 10 ₹12,800 | 10 ₹12,800 | 7 ₹8,960 | 17 ₹21,760 |
| 2.00 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. | 51.8 | QTL | 111 ₹5,749.80 | 50 ₹2,590 | 110 ₹5,698 | 100 ₹5,180 | 75 ₹3,885 | 100 ₹5,180 | 210 ₹10,878 | 100 ₹5,180 | 100 ₹5,180 | 150 ₹7,770 | 165 ₹8,547 |
| 3.00 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavey bracket framing (Beam, Tee, Angle, Channel or flat sections), Fe -290 (Gde E 165) including distance pieces, cleats etc. | 1,500 | Kg | 59 ₹88,500 | 72 ₹1.1 L | 88 ₹1.3 L | 70 ₹1.1 L | 72 ₹1.1 L | 80 ₹1.2 L | 75 ₹1.1 L | 80 ₹1.2 L | 65 ₹97,500 | 85 ₹1.3 L | 82 ₹1.2 L |
| 4.00 | M&L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW (electric run welded) or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete fabrication, erection and all as specified and directed. | 2,200 | Kg | 59 ₹1.3 L | 78 ₹1.7 L | 95 ₹2.1 L | 70 ₹1.5 L | 72 ₹1.6 L | 98 ₹2.2 L | 70 ₹1.5 L | 80 ₹1.8 L | 65 ₹1.4 L | 88 ₹1.9 L | 85 ₹1.9 L |
| 5.00 | M&L for plain / MS plate, channels, square cut ot notched (ordinary and counter sunk, forming holes without any attachment Fe-410-W (Gde E-250 quility A )complete all as directed by Engineer-in charge.(Appx ht 40 Ft) | 880 | Kg | 65 ₹57,200 | 78 ₹68,640 | 93 ₹81,840 | 70 ₹61,600 | 72 ₹63,360 | 80 ₹70,400 | 70 ₹61,600 | 80 ₹70,400 | 65 ₹57,200 | 90 ₹79,200 | 92 ₹80,960 |
| 6.00 | M&L for MS work (flat iron, round bar) and framed brackets of angles, joist, channel, angle or tee sections fixed independently without connecting plates etc cut to shape (cut to ordinary length i.e within 20mm of the length indicated) drilled and cuntersunk for screws, including bending and welding as necessary, confirming to fe-410-0 or fe 310-0 including removing of old brackets and remove to store including necessary welding and nut & bolts complete as specified and directed. | 600 | Kg | 65 ₹39,000 | 78 ₹46,800 | 88 ₹52,800 | 70 ₹42,000 | 72 ₹43,200 | 85 ₹51,000 | 60 ₹36,000 | 75 ₹45,000 | 65 ₹39,000 | 90 ₹54,000 | 82 ₹49,200 |
| 7.00 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed. | 70 | SQM | 35 ₹2,450 | 25 ₹1,750 | 44 ₹3,080 | 50 ₹3,500 | 30 ₹2,100 | 34 ₹2,380 | 105 ₹7,350 | 27 ₹1,890 | 40 ₹2,800 | 40 ₹2,800 | 42 ₹2,940 |
| 8.00 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thick above or below ground level including removal of debris out of Mod Land. | 66.25 | Cum | 222 ₹14,707.50 | 100 ₹6,625 | 150 ₹9,937.50 | 200 ₹13,250 | 75 ₹4,968.75 | 240 ₹15,900 | 910 ₹60,287.50 | 450 ₹29,812.50 | 100 ₹6,625 | 200 ₹13,250 | 165 ₹10,931.25 |
| 9.00 | M&L PCC 1:2:4 type B2 as in post holes and foundation using 40mm graded stone aggregate complete all as specified and directed. | 1 | Cum | 4,444 ₹4,444 | 1,800 ₹1,800 | 4,800 ₹4,800 | 3,500 ₹3,500 | 2,000 ₹2,000 | 3,750 ₹3,750 | 3,500 ₹3,500 | 3,500 ₹3,500 | 4,000 ₹4,000 | 5,000 ₹5,000 | 3,700 ₹3,700 |
| 10.00 | S&F Plain galvanised, mild steel sheeting of thickness 1.00mm, in ridges hips, valley gutters, drip qnd straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof, wall fixed with nut bolt etc complete all as directed. | 400 | Sqm | 456 ₹1.8 L | 400 ₹1.6 L | 580 ₹2.3 L | 300 ₹1.2 L | 540 ₹2.2 L | 650 ₹2.6 L | 490 ₹2.0 L | 470 ₹1.9 L | 300 ₹1.2 L | 800 ₹3.2 L | 1,047 ₹4.2 L |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
3 Dec 2025, 6:00 pmClosed
GE (NW) NOFRA
Dr Homi Bhabha Road Navy Nagar Colaba Mumbai
REPAIR MAINT OF BARRACKS SHEDS AND OTHER TEMP ACCN UNDER BR I UNDER GE (NW) NOFRA
2025_MES_739809_1
8480/E8 GE (NW) NOFRA
Open Tender
Civil Works
330 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE (NW) NOFRA
₹99,000
Yes
31 Mar 2026
14 Nov 2025
5 Dec 2025
14 Nov 2025
3 Dec 2025
28 Nov 2025
14 Nov 2025 - 21 Nov 2025
Amount
Dismantling old rusted CGI sheets from roof, gate and walls of the hanger complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavey bracket framing (Beam, Tee, Angle, Channel or flat sections), Fe -290 (Gde E 165) including distance pieces, cleats etc.
M&L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW (electric run welded) or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete fabrication, erection and all as specified and directed.
M&L for plain / MS plate, channels, square cut ot notched (ordinary and counter sunk, forming holes without any attachment Fe-410-W (Gde E-250 quility A )complete all as directed by Engineer-in charge.(Appx ht 40 Ft)
M&L for MS work (flat iron, round bar) and framed brackets of angles, joist, channel, angle or tee sections fixed independently without connecting plates etc cut to shape (cut to ordinary length i.e within 20mm of the length indicated) drilled and cuntersunk for screws, including bending and welding as necessary, confirming to fe-410-0 or fe 310-0 including removing of old brackets and remove to store including necessary welding and nut & bolts complete as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thick above or below ground level including removal of debris out of Mod Land.
M&L PCC 1:2:4 type B2 as in post holes and foundation using 40mm graded stone aggregate complete all as specified and directed.
S&F Plain galvanised, mild steel sheeting of thickness 1.00mm, in ridges hips, valley gutters, drip qnd straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof, wall fixed with nut bolt etc complete all as directed.
Taking down old FRP sheets from the roof of hangers carefully and Supply & fix new 4mm thick fibre reinforced translucent corrugated sheeting white colour with two corrugation side lap fixed with L-type or J-hook inclding bitumen washers complete all as directed.
S&F in repairs plain black MS sheet of thickness 1.25mm in wall cladding, steel gates, or in similar work complete all as directed.
Taking down cement plaster, any description on brick or stone walls and ceiling including racking of joints hacking for key scrubbing down with water etc for storey as directed by Engr-in-Charge incl all necessary scaffolding etc.
M&L preparation of new plastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of smooth wall care Putty finish as required punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified and directed.
Demolition of brick work built cement mortar of any position as directed by Engr-in-Charge
M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Taking down Cast iron/AC/PVC pipe of any dia and size fixed on wall or floor at any floor/ any height/ any location including all fittings complete all as specified.
S&F 100 mm dia sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge
Ditto as item no 20 above but 75mm
S&F 100 mm dia sand cast CI bend of any radius with ovel access door and jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge
Ditto- as per item 22 above but 75mm dia .
S&F 100 mm dia CI sand cast branch piece single branch of any radius with ovel access door and jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge.
S&F 100 mm dia branch piece double (equal or unequal) ordinary or inverted or with parallel brach and jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge.
S&F 75 mm dia branch piece single branch of any radius with ovel access door and jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge.
S&F 75 mm dia branch piece double (equal or unequal) ordinary or inverted or with parallel brach and jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed by Engr-in-Charge.
M&L for cleaning of PCC paver block, chequred tiles and any type of PCC flooring by water spray and apply two coat of acrylic emulsion paint suitable for floor using brush, complete all as specified and as directed.
Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper with smooth roller finish any floor incl Scaffolding,complete all as specified and directed. (Note after painting ,cleaning of all floors,glass & furniture by contactors own arrangement).
All as item No 29 above but on ceiling complete.
Material & Labour for preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying one coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. (Note after painting cleaning of all floors,glass & furniture by own arrangement).
All as item No 31 above but on ceiling complete.
M&L for 3mm thick wall care putty on wall as per manufacture instruction complete all as specified and directed by Engr-in-Charge.
M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge.
M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge.
M&L Preparation of old painted on steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 20mm thick screed bed in CM 1:4 complete all as specified.
Material and Labour for Coloured glazed ceramic tiles in vertical surface 350x250mmx7mm thick/450x350x7mm thick , set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.
M&L for coloured light shade Digitial Glazed vitrified tiles of size 600 x 600 mm, 7 to 8mm thick, laid in flooring, with & including 5mm thick adhesive of approved make including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints complete all as specified and as directed by Engr-in-charge.
M&L for coloured light shade Digitial Glazed vitrified tiles 7 to 8mm thick, superior quality, 100mm high skirting, over & including a backing coat of 10mm thick in CM 1:3, complete and making nosing at right angle corner, including levelling the wall, complete all as specified and as directed. (Note : Skirting shall be flush with the walls)
M&L for 25 mm Cement concrete type -B2 , 1:3:6 (using 40 mm graded stone aggregate) finishing cement concrete surfaces even and smooth without using extra cement complete all as specified.
M&L for 25 mm thick Sand filling for sub base of finishes including consolidation all as specified.
M&L for 60 mm Machine pressed precast interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 grade with grey cement and pigmentfixed with cement all as specified
M&L for Painting lines/arrows on road pavement n.exc. 10cm wide with road marking paint white or golden yelow
Material and labour for PCC (1:2:4) type B1, using 20mm graded stone aggregate as in coping, kerb stone pcc or similar places etc incl dismantiling of exsting concrete complete all as specified and directed by Engr-in-Charge
M&L for Metal frame suspended 12.5mm thick gypsum false ceiling size 600mm X 600 mm including metal perimeter channel of size 0.50mm thick(having one flange of 20mm and another of 30mm and web of 27mm) along with the perimeter of ceiling, screw fix to block/brickwall/partition with the help of nylon sleeves then suspending with metal intermediate channel of size .80mm thick with two equal flanges each 15mm from the sofit at 900mm c/c with help of sofit cleats and Rawl plug including dismantling of existing ceiling.
SN CONSTRUCTION (BID ID -3485903)
K.C.P ENTERPRISES (BID ID -3487539)
Angrahit Services Trading Co (BID ID -3487364)
Anil Industrial Corporation (BID ID -3485413)
ASHOK CONSTRUCTION (BID ID -3488600)
SHIV ENTERPRISE (BID ID -3488511)
Nilesh Construction (BID ID -3486267)
I.J Enterprises (BID ID -3488278)
SR Construction (BID ID -3487412)
GANGAJAL (BID ID -3486419)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
BOQ_828392.xls
BOQ • 1.73 MB
tenderpages8480.pdf
Tender Documents • 1.08 MB
Download all tender documents and submit your bid