Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.6 LAccepted-AOC | ₹22.6 L Quoted ₹23.0 L | L1 | Accepted-AOC Accepted L1 |
| 2 | L2₹25.8 LRejected-AOC | ₹25.8 L | L2 | Rejected-AOC Other than L1 |
| 3 | L3₹26.4 LRejected-AOC | ₹26.4 L | L3 | Rejected-AOC Other than L1 |
| 4 | L4₹28.8 LRejected-AOC GURHA BRAHMANA TEH AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | ₹28.8 L | L4 | Rejected-AOC Other than L1 |
| 5 | L5₹29.0 LRejected-AOC | ₹29.0 L | L5 | Rejected-AOC Other than L1 |
| Sl No | Description | Qty | Unit | M/s Rajesh Kumar Contractor L7 | LAL CONSTRUCTIONS L1 | PACHNANDA BUILDERS L6 | M/S SIKANDER KUMAR SHARMA L5 | bushan kumar L4 | Bodh Raj Sharma L8 | M/S KARAN SINGH CONTRACTOR L3 | M/s Chopra Constructions L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc. all specified and directed | 10 | Cum | 50 ₹500 | 10 ₹100 | 30 ₹300 | 10 ₹100 | 100 ₹1,000 | 694 ₹6,940 | 50 ₹500 | 20 ₹200 |
| 2.00 | Old size Brick work with sub class B brick straight or curved on plan to any radius in CM 1:4 complete all as specified and directed. | 8 | Cum | 3,500 ₹28,000 | 4,500 ₹36,000 | 3,000 ₹24,000 | 1,700 ₹13,600 | 2,500 ₹20,000 | 2,800 ₹22,400 | 2,500 ₹20,000 | 1,900 ₹15,200 |
| 3.00 | Ditto all as per item No.2 here in before But except bricks | 1 | Cum | 2,235 ₹2,235 | 3,000 ₹3,000 | 1,000 ₹1,000 | 1,600 ₹1,600 | 1,500 ₹1,500 | 1,400 ₹1,400 | 3,000 ₹3,000 | 800 ₹800 |
| 4.00 | Old size Brick work with sub class B half brick thick straight or curved on plan to any radius in CM 1:4 complete all as specified and directed. | 6 | Sqm | 450 ₹2,700 | 4,000 ₹24,000 | 250 ₹1,500 | 500 ₹3,000 | 500 ₹3,000 | 3,400 ₹20,400 | 800 ₹4,800 | 900 ₹5,400 |
| 5.00 | Repair to balcony Facia and soffit of chajjas etc by taking down old rendering and applying 15mm thick cement plaster to match the existing thickness in CM 1:4 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including preparation of surface and applying two coats of cement base paint as required over one coat of primer including necessary formwork/scaffolding work upto height 7 mtr above ground level of bldg complete all as specified and as directed. | 650 | Sqm | 250 ₹1.6 L | 125 ₹81,250 | 300 ₹1.9 L | 250 ₹1.6 L | 299 ₹1.9 L | 20 ₹13,000 | 300 ₹1.9 L | 295 ₹1.9 L |
| 6.00 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed. | 1,590 | Sqm | 10 ₹15,900 | 5 ₹7,950 | 2 ₹3,180 | 1 ₹1,590 | 5 ₹7,950 | 30 ₹47,700 | 2 ₹3,180 | 2 ₹3,180 |
| 7.00 | Rendering 10 mm thick cement plaster with cement mortar(1:6) on fair finishes of brick work or concrete surface of roof slab, to be finished even and smooth(without using extra cement ) all as specified and directed. | 1,050 | Sqm | 150 ₹1.6 L | 90 ₹94,500 | 135 ₹1.4 L | 40 ₹42,000 | 145 ₹1.5 L | 120 ₹1.3 L | 150 ₹1.6 L | 80 ₹84,000 |
| 8.00 | Rendering 15mm thick cement plaster with cement mortar(1:4) fair finishes of brick work or concrete surface of roof slab, to be finished even and smooth(without using extra cement ) all as specified and directed. | 450 | Sqm | 150 ₹67,500 | 100 ₹45,000 | 135 ₹60,750 | 60 ₹27,000 | 145 ₹65,250 | 150 ₹67,500 | 150 ₹67,500 | 135 ₹60,750 |
| 9.00 | Rendering 5mm thick cement plaster with cement and sand mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement all as specified and directed. | 90 | Sqm | 120 ₹10,800 | 80 ₹7,200 | 135 ₹12,150 | 70 ₹6,300 | 145 ₹13,050 | 150 ₹13,500 | 160 ₹14,400 | 60 ₹5,400 |
| 10.00 | Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. | 100 | Sqm | 15 ₹1,500 | 8 ₹800 | 10 ₹1,000 | 109 ₹10,900 | 10 ₹1,000 | 22 ₹2,200 | 10 ₹1,000 | 9 ₹900 |
Updated dates
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
27 Dec 2025, 6:00 pmClosed
GE (N) Akhnoor
GE (N) Akhnoor C/O 56 APO PIN-181201
Comprehensive maint services incl plater chajja parapet and certain BR nature Work of JCO OR Md Accn at RLT vihar under GE N Akhnoor
2025_MES_742180_1
GE(N)/AKH-65/2025-26
Open Tender
Civil Works
180 days
Akhnoor
Class D Cat a i
8 documents required · 8 mandatory
₹500
GE (N) Akhnoor
₹70,000
Yes
20 Jan 2026
29 Nov 2025
3 Jan 2026
29 Nov 2025
27 Dec 2025
13 Dec 2025
Amount
Demolition of brick work built in cement mortar including all quions, arches, pillars etc. all specified and directed
Old size Brick work with sub class B brick straight or curved on plan to any radius in CM 1:4 complete all as specified and directed.
Ditto all as per item No.2 here in before But except bricks
Old size Brick work with sub class B half brick thick straight or curved on plan to any radius in CM 1:4 complete all as specified and directed.
Repair to balcony Facia and soffit of chajjas etc by taking down old rendering and applying 15mm thick cement plaster to match the existing thickness in CM 1:4 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including preparation of surface and applying two coats of cement base paint as required over one coat of primer including necessary formwork/scaffolding work upto height 7 mtr above ground level of bldg complete all as specified and as directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.
Rendering 10 mm thick cement plaster with cement mortar(1:6) on fair finishes of brick work or concrete surface of roof slab, to be finished even and smooth(without using extra cement ) all as specified and directed.
Rendering 15mm thick cement plaster with cement mortar(1:4) fair finishes of brick work or concrete surface of roof slab, to be finished even and smooth(without using extra cement ) all as specified and directed.
Rendering 5mm thick cement plaster with cement and sand mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement all as specified and directed.
Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
Preparation of surfaces of ceiling finished with putty and applying two coat of oil bound distemper over one coat of primer all as speicfied and directed.
Preparation of newly plastered surfaces of wall and applying two coat of cement base paint , complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed.
Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of oil bound distemper complete all as specified and as directed.
All as per item no 14 here in before but one coat of distemper oil emulsion on ceiling
Complete removal of existing old treatment ( layer incl old cement based paint,white wash,weather coat exterior paint etc) of walls upto plaster level with machanical means incl cleaning,washing,rubbing etc and applying two coats of exterior emulsion paint (weather proof Apex paint only) over a coat 2 mm putty on wall complete all as directed.
Complete removal of old painted surfaces by washing, rubbing down and stopping of distempered or painted walls and applying two coats of cement base paint white or tined, complete all as specified and as directed.
Preparation of old painted wall surfaces and applying two coat of synthetic enamel paint over 2mm putty on concerete surface of walls complete all as specified and directed.
Preparation of old surfaces and applying one coat white wash to walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efforescent salts and removing oil and greasy spots all as specified and as directed.
All as per item no 19 here-in -before but two coats of white washing on walls
All as per item no 19 here-in -before but one coat of white washing on ceiling
Preparation of new plastered surfaces and applying two coats of oil bound distemper white/tinted over 2 mm wall care putty on walls complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
40 mm PCC 1:2:4 type B1 using (20mm graded crushed stone aggregate) as in flooring including finish the top surface even and smooth ( without using extra cement) complete all as specified and directed .
50mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in bays with mastic filling in joints complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.
Sand cushion in flooring below interlocking tiles complete all as specified and directed( laid in layers 25 mm thick)
Machine pressed precast concrete interlocking paver block (ISI marked) any shape and size confirming to IS 15658-2006 of 60mm thickness with grey cement and pigment M35 Grade, complete all as approved and specified and directed.
Chequered cement concrete tiles 25x25x25 cm/30cmx30cmx25mm thick laid & jointed with grey cement and pointed in neat cement slurry in floors 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes all as specified and directed.
PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerb, padding , finished surface even and fair, complete all as specified and directed.
PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base and mass concrete complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
25 mm PCC 1:2:4 type B0 using (12.5mm graded crushed stone aggregate) as in including finish surface of concrete topping even and rough as in leveling course ( without using extra cement) complete all as specified and directed .
Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and directed.
Ditto all as per item No.33 but in skirting/dado and including 10 mm thick rendering CM 1:4
Glazed ceramic coloured tiles (350x250mm)/ (450x350mm) x 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in CM 1:4 on other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed.
Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed/base in cement and sand mortar 1:6, complete all as specified.
Ditto all as per item no 36 but in skirting over and 10 mm thick rendering in CM 1:4
20 mm thick makrana white marble as in border/cooking platform etc, bedded and jointed over 20mm thick screed in cement mortar 1:6 including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed.
Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed.
Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 290(Gde E-165), quality 'A' complete all as specified and as directed.
Dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa s in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets GI framework complete all as specified and directed.
4mm thick non asbestos Pre-laminated false ceiling board over GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm, main runner 'T' of size 25x40x3mm , secondary runner 'T' of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/c complete all as specified.
Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'p' trap fixed in repairs complete all as specified and directed.
Vitreous china wash down water closet pan (pedestal pattern), (size 570mmx460mmx380mm), white (excluding fixing bolts, flushing cistern and flush pipe) with "P" or "S" trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. Complete fixed in repairs complete all as specified and directed.
PVC valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and as directed.
Vitreous China urinal with CP spreader Chrome finish hole and fixing accessories Half stall type (back or corner wall type)(size 355mm x 340mm x535mm) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including PVC Connection,waste pipe and coupling. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed in repairs including Urinal partion White colour 310x700 mm of marble complete all as specified and as directed by Engineer-in-Charge.
Vitreous china wash basin, white, flat back, size 550x400mm including waste fitting chromium plated brass, pillar tap, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe etc., fixed in repairs complete all as specified and as directed.
PVC connection 15mm size of length 450mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed
Taking up or down 15mm dia steel water tubiing and connections all as specified.
Ditto all as per item .53 but 20 mm bore
Mild steel galvanized steel tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and directed.
Ditto all as per item .55 but 20 mm bore
Refixing old steel water tubing of 15mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.
Ditto all as per item .57 but 20 mm bore
CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore incl add if fixed in repairs complete all as specified and directed.
Bib taps (Long body) for 15mm bore dia of pipe, fancy type chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.
Pillar tap of 15mm bore dia fancy type capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified.
Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1 meter long flexible spirochrome flex tube and ABS wall hook including making connections and fixed in repair in position complete in all respect as specified.
Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, including taking down of existing seat cover all as specified and directed.
Supply and fix in repair only ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball 20mm dia bore.
Plate rack made of stainless steel 0.8mm thick overall size 786mm x 610mm x 254mm, complete all as specified and directed.
15mm bore brass CP wall mixer with provision for overhead shower arrangement with 115mm long bend pipe on upper side for mixing hot and cold water supply screwed down with connecting legs CP extension nipple & wall flange connector for hand shower arrangement with connecting Legs, wall Flanges & wall bracket for hand shower for mixing hot or cold water, screwed for iron pipe and fixed in repairs, complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel (1mm thick) kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm as approved by Engr-in-Charge complete all as specified and directed.
20 mm bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed.
Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) 03 layered hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.
Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) 03 layered hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.
Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm with shutters (without taking off shutters from the frames) all as specified and directed.
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from site, complete all as specified and directed
Taking down and refixing including resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.
Pressed steel frames for doors with one or more rebates of size 125x60mm including necessary fixing lugs, hinges, lock strike plates complete, providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed.
Pressed steel frames for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock strike plates complete, providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed.
PCC 1:2:4 type c-0 (using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame complete all as specified and directed.
PCC 1:3:6 type c-1 (using 20 mm graded crushed stone aggregate) as in for hold fast blocks including neccesary form work for rough finishes , complete all as specified and directed.
35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed.
35mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.
Solid PVC (Door/almirah/cupboard) frames of size 50 x 47mm made out of 5mm dia plain colour PVC Sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing all as specified.
Factory made solid panel PVC door incl Almirah / Kitchen Cupboard / (wooden texture) shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.
100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified.
250 mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.
Aluminium anodised barrel tower bolt 150mm extruded section ISI marked complete.
Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed.
300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed, complete all as specified.
Curtain rail ,25 mm dia Stainless steel ,chromium plated fixed with CP bracket, incl taking down of old curtain rods, complete all as specified.
Steel windows/ventilator (Box type) factory made with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid separately under respective item
Ditto as per item here in before without grill and glazing bar complete all as specified and as directed by engineer in charge
Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
Glazing with sheet glass 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Figured glass sheet, 3.00mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.
S&F in repair Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.
Preparation of new untreated steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Preparation of new untreated wood and wood based surfaces of any description over 10cm in width or girth not otherwise described and painting with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.
Preparation of old steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.
Preparation of old wood and wood based surfaces of any description over 10cm in width or girth not otherwise described and painting with one coat of synthetic enamel paint, complete all as specified.
Pre laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame and necessary item like hasp and staple , in repairs as cupboard/Alimirah shelve and shutter, 18/19 mm thick.
Intermat auto closing concealed hinge, fixed in repairs as approved complete all as specified and as directed.
Supply & fixing of 6" premium quality crome finish Handle,complete as directed .
19-20mm wide and 0.80mm thick decorative type PVC beading complete all as specified and directed.
Stainless steel gratings 100/125mm dia fixed with cement motar fixed in repairs, complete all as specified and as directed.
S&F in repair waste pipe for SINK/WHB/Urinal for 32/40mm dia all as specified & as directed.
Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc . complete all as specified.
110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed in walls with PVC/MS holder clamp complete all as specified.
75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
PVC (SWR) bends any radius 110mm dia with oval access doors fixed in repairs complete all as specified and directed.
PVC (SWR) bends any radius 75mm dia with oval access doors fixed in repairs complete all as specified and directed.
75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed.
M/s Chopra Constructions (BID ID -3509033)
M/S KARAN SINGH CONTRACTOR (BID ID -3509317)
bushan kumar (BID ID -3503712)
M/S SIKANDER KUMAR SHARMA (BID ID -3509496)
PACHNANDA BUILDERS (BID ID -3509339)
M/s Rajesh Kumar Contractor (BID ID -3503389)
Bodh Raj Sharma (BID ID -3503482)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
Tender65.pdf
Tender Documents • 1.03 MB
BOQ_831080.xls
BOQ • 2.99 MB
Download all tender documents and submit your bid