PROPOSED CONSTRUCTION OF ADDITIONAL THIRD FLOOR AND RENOVATION OF EXISTING BASEMENT, GROUND, FIRST, SECOND FLOOR IN SRIRAMANUJA JEEYAR MUTT BELONGS TO ARULMIGU ARANGANATHA SWAMY TEMPLE, SRIRANGAM AT TIRUMALA, TIRUPATI.

Amount

Dismantling the damaged Doors, Furniture items and windows including removal of frames, Hinges, fastenings etc., complete complying with standard specification and as per the direction of the Engineer-In-Charge.

Dismantling the damaged brick / stone masonry work in cement mortar and clearing away with carefully stacking the material useful for reuse for any thickness of wall under 3 m heights etc., complete complying with standard specification and as per the direction of the Engineer-In-Charge.

Dismantling, removing and carefully stacking Flooring/wall tiles and clearing away the same 50 m away from the site and roughening the surface etc., complete complying with standard specification and as per the direction of the Engineer-In-Charge.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.

Providing Pre-constructional anti- termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentrations raft slab and beam, under Cellular raft slab, around the footings, column pits, trenches, pits, wall trenches, back fill, plinth filling, junction of wall and floor, side walls of foundation, external perimeter of building,surrounding of pipes expansion joints, etc. as per IS specification and as per the instructions of chemical manufacturer and all as directed.The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 (PART-2) or equivalent BS specification.

Supply and Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete

Cement Concrete 1:5:10 (One Cement : 5 Sand : 10 HBGS) using 40 mm ( 0.54 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members

For Vertical surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical walls etc.

for plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of centering,shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).

Foundations, Plinth, Pedestals (Below Plinth)

Columns, Lintel, Water tank, RCC walls in Buildings

RCC Slabs, Beams

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars (Fe 500) of specified grade (as per IS 1786 - 2008) of different diametres for RCC works,including labour charges for straightening, cutting, bending to required sizes and shapes,placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).

Construction of Brick Masonry in CM 1:5 using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete

Basement:-

Construction of Brick Masonry in CM 1:6 using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Construction of 110 mm thick Brick partition walls in CM 1:3 using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. Complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand thesurface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls.

Plastering in Cement mortar 1:5, 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners,incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions

Dadooing walls with best approved quality, white / colour glazed tiles of size 450x300x8mm set in Cement Mortar 1:3 (One Cement and Two crushed stone sand) 12gmm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Flooring with granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work.Galaxy granite 18-20 mm thick up to 8'-00 (2.43m) (premium quality)

Flooring with Antiskid floor tiles 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply). Supply of Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs Complete.

Flooring with granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work for staircase in all floors.telephone Black Granite 18-20 mm thick upto 2.43 M - (regular colours)

Cement Concrete (1: 2.5 :5) grade M -15 using 20 mm ( 0.54 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing,machine mixing, cost and conveyance of all materials etc., complete.

Providing and laying water proofing cum heat insulation treatment with Home Shield Polurethane (PU) Roofkoat (Berger or equivalent) over existing roof slab, all as directed by Engineer-in-charge and as per the following specification: Surface Preparation 1.Clean the Surface thoughly to make it smooth and free of any foreign material 2.Water pounding test for Mother slab to identify the leakages points before starting the water proofing treatment work 3.Injection grouting should be done for all leakages point indentified and inject the cement slurry dmixed with injection grout admixture, using pressure grouting machine till the rejection of material from the nozzle. 4.Reparing od construction joints by chasing with cutting machine and fill the same with polymerized mortor in C.M91:4) admixture with Advanced Latex plus as per the specified company instructions. Water proofing Application with PU Roofkoat: 1. Apply a self-priming coat of PU Roofkoat after diluting with clean water @50%(1:0.50) 2.Allow to dry for 4 to 6 hours 3.Ally 1st coat of PU roofkoat [email protected] per sqm. 3.Allow to dry for 4 to 6 hours 4.Apply 2nd caot of PU roofkiat wuithout dilution @ 0.40Kg per Sqm The cost inclusive of all required materials such as Home Shield Polurethane (PU) Roofkoat (Berger or equivalent),Injection goruting with required materials, reparing construction joints with required materils and all labour charges for above activities etc., complete as directed during execution.

Paving the Top of roof with Solar refelective tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from ollforming process of required length (shape & size ccording to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent.Three track three panels sliding window with fly proof SS wire mesh(Two nos.glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded door frame section shufter encapsulation of 8mm rigid layer top and bottom rigid layer the six surfaces lt will using door frames section of size 45 x 90mm. the two vertrical members one to be together with the horizontal members the complete as per std. specifications. door shutter soild wood polymer composite (WPC) single excluded door shutter 28-30mm thick with 3mm top and bottom ripid layers with an overall density of 750kg/cum etc., complete as per specification.

Supplying and fixing in position panelled doors of different sizes specified in drawings with frame of the following sizes alround without threshold plates and without ventilating head with Teak Wood fully panelled shutters in single leaves made of using styles of size 75X40mm top rail, 75X40 mm bottom rail of size 200x40mm and lock rails of size 150X40 mm and intermediate rail of size 75X40 mm and panels of 20 mm thick with MS 'Z' Hold fasts of 230X50X6mm ,M.S powder coated Butt Hinges of 125X65X2.12mm etc.,but excluding cost of other fixtures etc.,which will be paid separately.

Supplying and fixing in position panelled doors of different sizes specified in drawings with frame of the following sizes alround without threshold plates and without ventilating head with best Teak Wood fully panelled shutters in Doubleleaves made of using styles of size 75X40mm top rail, 75X40mm bottom and lock rails 150X40mm and intermediate rail 75X40mm bottom and panels of 20mm thick with MS 'Z' Hold fasts of 230X50X6mm, M.S powder coated Butt Hinges of 125X65X2.12mm etc.,but excluding cost of other fixtures etc.,which will be paid separately.

Providing and fixing false ceiling using mineral fiber board at all heights with integral densified 16 mm - Tegular Edge 600 x 600 of Board / Tegular/l\4icro look Edge tiles with a Humidity Resistance of 99%RH, Average NRC 0.60, Light Reflectance>88%, Thermal Conductivity l = 0.052 to 0.057 Wmk, Fire Performance Class 0/Class '1. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-charge.

Providing wooden panelling 12 mm thick one side laminated sheet fixed on wooden frame of BT wood size 50.8 mm x 25.4 mm (2"x1") at distance of 609.6mm (2'-0") intervals of both ways providing 3/4" x 1/2" (19.05 mm x 12.7 mm) size BT wood ornamental cover beading and necessary screws, fevicol glue complete for finished item of work.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of all materils, Labour charges for cutting, bending, welding, grinding, polishing, Transportation, electrical charges, etc. complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Painting two coats for new iron works with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Polishing the wood work with best french sprit polish of two or more coats of a approved quality and make over wood polish (Ready made) before applying french spinit polish including cost of brushes, linked oil, boiled, stoping cloth, turpentine cost and conveyance of all materials as directed during execution etc., complete.

Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'S' trap with ISI mark or equivalent brand approved by the department.

Supplying & Fixing white glazed flat back half stall urinals 1st quality confirming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x95 x 57 mm confirming to IS:2556 - Part 6, Sec-6-1974 fixed with screwscomplete Indian make with ISI mark or equivalent approved by the department.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warranty.

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block.

Supplying and fixing in position 600 x 450 mm size wall mirror with 5 mm thick glass (Saint Gobion) with 6 mm plywood IS 303 bwr (both sides commercial) back in position with 12 mm Aluminium 'U' channel (Jindal make) including cost and conveyance of all materials etc., complete

Over head Shower: Supply & fixing overhead shower rose with revolving joint and 150 mm long swivel shower arm Jaquar make queen series. With 7 years warrant

Supply and Fixing 12.7mm NP two way Angle cock Indian make heavy duty.

Supply & fixing towel rod (CP) of 24'' long and 3/4'' dia etc.,complete complying with standard specifications.

Supply & fixing NP soap dish heavy type with NP Screws.

Supply and fixing CP Long body bib cock fancy type deluxe heavy duty 12.7mm dia Indian make 400 grams.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition,including testing for any leakages,etc.,complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below Stilt level.

50mm dia 6 kg / sq.cm class PVC pipe

75mm dia 6 kg / sq.cm class PVC pipe

110mm dia 6 kg / sq.cm class PVC pipe

Supplying and fixing in position cost iron Nahini / Floor trap with Stainless steel grating / PVC nahini / Floor Trap with PVC Grating type of size 100 x 75 / 75 x 50 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1;2;5 (One lime two sand and five aggregate ) brick jelly 40mm and finishing with cm 1;3(One cement and three sand) including dismantling masonary wherever found necessary and making good to the original condition and giving connections to the cast iron pipe etc, complete complying with standard specififcation and as directed by the departmental Officers.

Supply and fixing in position best quality PVC IS 4985 - CLASS-II - 4 Kg/Sqcm -Rain water pipes of various size having ISI mark and providing leak proof joints with such as Bend, Tee Junction, door etc.,of approved qualityincluding fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, wherever necessary and making chipping good to the original condition, complying with standard specification etc.,complete.

110mm dia 4 kg / sq.cm class PVC pipe

Supplying and fixing in position of the following dia PVC rain water gratings for rain water pipes ,of approved quality and variety of various size confirming to ISS and including necessary cutting and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer.

100mm dia gratings

Supplying and fixing in position of the following dia PVC specials such as PVC vent Cowl etc.,of approved quality and variety of various size confirming to ISS amend providing leak proof joint etc., including necessary cutting and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer.

110mm dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia 6 kg / sq.cm class PVC pipe

110mm dia 6 kg / sq.cm class PVC pipe

160mm dia 6 kg / sq.cm class PVC pipe

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Providing, supplying & laying of Chlorinated Poly Vinyl Chloride (CPVC-SDR-11) Pipes conforming to IS 15778 having thermal stability with brass and CPVC fittings like Elbow, Brass Tee, Brass Elbow, Offsets, Tee with clamps @1.00 meters spacing, with jointing of pipes with one step CPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, etc all complete as per as per specifications, Exposed work including chase cutting, bracket fixing)complete complying with standard specification and as directed by the Departmental Officer.

20mm dia

25mm dia

Providing, supplying & laying of Unplasticized Polyvinyl Chloride (UPVC-SDR-11) Pipes conforming to IS 15778 having thermal stability cold water with brass and UPVC fittings like Elbow,Brass Tee, Brass Elbow,Offsets,Tee with clamps @1.00 meters spacing, with jointing of pipes with one step UPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc.Rate is inclusive of all material labour, transportation,tools & tackles all complete as per as per specifications,Concealed work including chase cutting) complete complying with standard specification and as directed by the Departmental Officer.

40mm dia

Providing, supplying & laying of Gunmetal type NRV - pressure rating less tahn 16 Kg/Sqcm and IS778 with 2 Nos of MTA with jointing material like shellac, thread including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, complete complying with standard specification and as directed by the Departmental Officer

20mm dia Gunmetal gate value

Supplying and erection of horizontal shaft submersible pump set of single phase 2.00 H.P of best approved quality and make with ISI mark on suitable pedastal with foundation bolt and nut including labour supplying and fixing of starter and main switch suitable for 2.00 H.P pumpset on suitable angle iron frame work with necessary labour including panel board, supply and run off 4 of 10 Sq,mm, in P V C pipe with 14 SWG TC wire including fixing of suction pipe and foot valve up to a maximum depth of 7m and delivery pipes upto the exterior wall of pump room etc., complete and operating the pumps on trial run for 3 days. (The make and quality of pump set to be got approved by the Executive Engineer before use on works.)

Structural Strengthening with Epoxy Injection Grout Providing and grouting with two component low viscous Moisture Insensitive Epoxy Injection Grout to strengthen the structure at cocrete cracks. The material having mixing ratio - (Base : Hardener) - 100:60 (by weight) at the rate of 0.50kg/nozzle, which gives compressive strength of 70N/mm2 in 7days as per BS6319:part 2, Flexural strength of 30N/mm2 in 7days as per BS6319:part 3, Tensile strength of 15N/mm2 in 7days as per BS6319:part 7, epoxy resin based injection grout meets the requirement of BS 6319 & ASTM C881. The finished cost to include surface preparation,fixing of non-return valve injection packers at concrete cracks, seal the nozzles with polyester resin anchor grout Instant leak plug 0.2kg/nozzle.All the application procedure shall be as per the direction of the Engineer In charge.

Providing and fixing of Teak wood cot of king size having a dimensions of 6'3" x 6'8" x 20" with the following specifications. Teak wood side rails having a cross section of 3.5" x 1", Teak wood slat board having a cross section of 2.5" x 1", legs having a size of of 2.5" x 2.5" x 20" .The Bed board is provided with 19mm thick plywood of water proof grade hard wood ply of best quality. All the members are connected by means of necessary joints, steel bolts and nuts. The Teak wood Cot should comply with given design, it should be finished neatly with wood polish of two coats etc., The cost includes cost of materials, labour, loading, unloading, transportation, fitting, polishing etc., Complete complying with standard specifications.The sample shall be got approved by the Executive Engineer

Supplying and placing the Side Table of size 0.45 x 0.45 x 0.50 m with 19mm thick plywood of water proof grade hardwood ply of best quality with 1mm thick lamination sheet finish and Top surface of the stand is finished with 6mm thick Solid Acrylic sheet finish with necessary 1 no fo drawer provided at the Top and placed at suitable position of approved quality and design. The cost includes cost of all materials, labour charges, loading and unloading etc.,complete complying with standard specification and as directed by the departmental officers.The sample shall be got approved by the Executive Engineer

Supplying and Fixing of Wardrobe Size of 4'.0" x 6'6"x1'10" (L X H X D ) with 19mm thick plywood of water proof grade hardwood ply of best quality with 1mm thick lamination sheet finish, all Doors fitted with “Soft Closer”, each side 4 no’s totally 8 no’s, Drawer fitted one no. of Lock with Key, side branded telescopic runners, Top of the wardrobe both side fitted with “SS” hanger bipes, Bottom of the Wardrobe fitted with lengthy bushes, front door fitted one heavy locker with key. And two long SS handles total wardrobe and fittings complete., and as directed by the departmental officers.The sample shall be got approved by the Executive Engineer

Supplying and placing the Luggage Plain Table of size 1.80 ( w) x 0.45 (D) x 0.45 m (H) with 19mm thick plywood of water proof grade hardwood ply of best quality with 1mm thick lamination sheet finish at the Top and placed at suitable position of approved quality and design. The cost includes cost of all materials, labour charges, loading and unloading etc.,complete complying with standard specification and as directed by the departmental officers.The sample shall be got approved by the Executive Engineer

Providing and fixing Half height specialized wall paneling made of aluminium section 50 x 25 mm both in horizontal & vertical direction 600 mm center to center spacing and the alternative vertical frames should be anchored in RCC slab and the frame work shall be covered duly filled with the 9mm thick plywood and 1mm laminated finished off approved shade with necessary hard wards etc., the rate including cost of all Materials and labour charges for cutting and fixing the Aluminium box section,9mm thick plywood, 1mm thick lamination sheet and necessary cutting for switch box fittings and complete. The quality and colour for the all items involved are got prior approval from the executive engineer before use on work.

Providing and fixing specialized wall paneling for Wooden cot Head area made of aluminium section 50 x 25 mm both in horizontal & vertical direction 600 mm center to center spacing and the frame work shall be covered duly filled with the 9mm thick plywood with liner velvet colour cloth finished and all round border 100mm thick 1mm laminated finished with 0.5mm thick edge taped approved shade with necessary hard wards etc., the rate including cost of all Materials and labour charges for cutting and fixing the Aluminium box section,9mm thick plywood, 1mm thick lamination sheet and necessary cutting for switch box fittings and complete. The quality and colour for the all items involved are got prior approval from the executive engineer before use on work.

Supplying and fixing of curtain screen. Use of material 25mm thick SS Curtain pipe with end cap and screen Sheer fabric in 87 GSM weight 73 % polyester ,27% linen finish for outer level curtain and inner( Front) cotton satin coffee colour fabric in 225GSm weight 100% cotton composition with necessary hardware erection at your site including all labour cost etc., Complete, As diredt by the departmental oficers.

Providing and fixing bevelled edge mirror of superior glass 6 mm thick (of approved quality and make) and of required shape and size over 12mm plywood water proof quality approved make with adhesive / S.S studs of appropriate size and numbers. with 19mm plywood with 1mm lamination finish for mirror stand. The mirror shall be provided with polythene sheet backing so as to avoid direct contact of moisture with the silver coating on the mirror rear side. Rate shall be inclusive of all hardware, labour, etc, complete and as per directions of Engineer-in-charge.The quality and colour for the all items involved are got prior approval from the executive engineer before use on work.

Manufacturing and supplying of Reading Table with Storage unit The size shall be 600mm Depth mm x 750 Height mm .with 19mm thick plywood of water proof grade hardwood ply of best quality with 1mm thick lamination sheet finish. The table top shall be 1mm laminated finish over the 19mm water proof plywood. 1no of open Shutter and two no of Drawer one no. of Lock with Key, side branded telescopic runners, SS Hinges and 100mm SS handle , Bottom of the The shape, colour, shade and size are as per design as instructed by the departmental officers concern. The rate includes cost of all materials, fabrication, transports and other incidental charges, including fixing in position and excluding GST etc., complete.

Providing and fixing TV Show Case Unit wall paneling work for show case area made of work shall be covered duly filled with the 9mm thick plywood with 1mm laminated finished and all round border 150mm thick projection of 19mm with both side 1mm laminated covered over the 19mm plywood finished with 0.5mm thick edge taped approved shade with necessary hard wards etc., the rate including cost of all Materials and labour charges for cutting and fixing the 19mm and 9mm thick plywood, 1mm thick lamination sheet and necessary cutting for switch box fittings and complete. The quality and colour for the all items involved are got prior approval from the executive engineer before use on work.

Supplying and placing of wood chair of size of 1'6"X1'6"X1'9" with following specifications 1) spindle made out of 32x20 mm with ornamental fininshing 2) The front and rear leg made out of size 40x50mm 3) Aprons made out of size 40x40mm 4) handles are madeout of 80x40mm 5) The bottom and back of the chair provided with fabric cushion arrangements 6) Decorations to improve the elevation of the Chair etc.,complete complying with standard specification and as directed by the departmental officers.The sample shall be got approved by the Executive Engineer

Supplying and placing King Size Mattresses of size 6'3" x 6'8" x 6" thickness of approved and best quality Multi layer spring and foam type wih the following specification. The top and bottom layer of the mattresses consist of 25mm thickness of Fabric made up of 23 D Poly Urethene(PU) foam and non woven 22 GSM with quilt. The middle layer consist of 100 mm thick, 23D multi layer panel consist of pocket coiled springs. The mattresses should comply with standard specifications and make such as kurl on / Repose / Duroflex / Peps etc. The cost includes cost of all materials, labour, loading, unloading, etc., Complete complying with standard specification.and as directed by the departmental officers.The sample shall be got approved by the Executive Engineer

Supplying and placing Cotton Bed Spread of size 274 x 274 cm made up of high quality cotton fabric of white colour. The cost includes cost of Bed spread, loading and unloading, transportation etc., Complete Complying with Standard Specifications.The sample shall be got approved by the Executive Engineer

Supplying and placing polyester fibre pillow of size 60cm x 40cm made up of polyester fibre filler materials and must be white in colour. The pillow should provide good support and washable. It should be of hygenic quality and must keep from allargies. The cost includes cost of pillow, loading and unloading, transportation etc., Complete Complying with Standard Specifications.The sample shall be got approved by the Executive Engineer

Supplying and placing Cotton Pillow covers of size 68 cm x 46 cm made up of high quality cotton fabric of 160 TC in white colour. The pillow cover should be ideal for pillows of size 60 cm x 40 cm. The cost includes cost of pillow cover, loading and unloading, transportation etc., Complete Complying with Standard Specifications.The sample shall be got approved by the Executive Engineer

Supplying and placing Cotton bath towels of size 70 cm x 140 cm made up of high quality and soft cotton fabric of white colour. The cost includes cost of towel, loading and unloading, transportation etc., Complete Complying with Standard Specifications. The sample shall be got approved by the Executive Engineer

Manufacturing and supplying of Sofa 3 seater 1500x650 - SEAT FOAM: The seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. 3)UNDERSTRUCTRE : Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood OCP-QLTA-PL14-18 4. Dia 4mm zigzag spring assembly should be mounted in understruCture for support and additional cushioning purpose 4) LEG ASSEMBLY: It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. Overall Dimensions:- Width (W): 205.5 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM.The shape, colour, shade and size are as per design as instructed by the departmental officers concern. The rate includes cost of all materials, fabrication, transports and other incidental charges, including fixing in position and excluding GST etc complete.

Supplying and placing of Teak wood Teapoy of size 0.90 x 0.60 x 0.50 m with legs of size 2" x 2 “top of the table 12 mm glass finished with glabanished finishing, finally finished with 3 coat of melamine water proof polish finish, the cost includes cost of all materials ,labour charges ,loading and unloading etc: complete complying with standard specification and as directed by the departmental officers .The sample shall be got approved by the Executive Engineer

Manufacturing and supplying of Vip sofa-3 seater - Dimensions:- Total Length 1710mm, Total Width 860mmm Total Height 770mm, Seating Area Width 540 mm, Seating Area Length 1265mm, Seating Area Height from Ground 415mm, Arm Height 505mm, Arm Length 610mm, Back Height from Arm 295mm, Arm Width 230mm Upholstery - Leatherette Frame Structure Material and size:- 18 mm thick Teak Plywood Seat Cushion Material:- Foam Density of Cushion of Seat Material (Kg/Cubic M):- 30 Type of Spring in the Base / Seating:- Web suspension.The shape, colour, shade and size are as per design as instructed by the departmental officers concern. The rate includes cost of all materials, fabrication, transports and other incidental charges, including fixing in position and excluding GST etc complete.

Supplying and placing of Wooden Dining table with Chair:Supplying and fixing of Wooden dining table with chair. The table size of 1200mm round dia The teak wood frame for leg with varnish finish and Teak wood table top with varnish finish. One number of Teak wood dining chair with varnish finish and necessary hardware etc. complete. The quality and colour for the all items involved are got prior approval from the Department Engineer before use on work.Dining Table – 1 No, Dining Chair - 4 Nos

Supplying and placeing the Reception table with high quality 19mm thick water proof plywood with 1mm thick lamination finished board. . Two sides and top of the table covered with ply with lamination board including drawer arrangements neceeary bushes provided at the bottom and placed at suitable position of approved quality and design . The mirrior is embedded with top of the table having size of 0.60 d x 0.75 h x 1.200 m )l( with alround 3 " borders etc ; the cost includes cost of all matrials , labour charges , loading and unloading etc; complete complying with standard speification and as directed by departmental offiers The sample shall be got approved by the Executive Engineer

Providing and placing of 3 Seater cusion waiting chair . Chair with cushion Seat and back - overall frame to be made out of 20MM dia 1.5MM thickness M.S. round tube. Chair Size : Sitting Height 18", Chair Width: 18", Back Height from Sitting 20" (H) . Foam density is 2 inch. Back and seat with cushion. foam cushioned top covered with rexine Pre- treated and epoxy powder coated. Writing pad to be of 18MM thickness commercial Plywood with fire resistance, metal structure to be Epoxy finish ect., complete complying with standard speification and as directed by departmental offiers The sample shall be got approved by the Executive Engineer

Manufacture, Supply and placing of SS 304 grade 3 Seater Dining table with size of Size 1800 L x 450 D x900 H mm. which is made up of1.2 mm thick S.S. 304 ERW pipe. Which has 4 vertical legs with levellers. Horizontal members provided for the support on top and at bottom. Bottom horizontal members provided 150 mm above the floor level with Pipe section 25X25X1.2mm thick. The unit is finished with semi mat finish Completely welded consouction. etc. Above table is provided with 1.2mm thick SS Sheet finish ect., complete complying with standard speification and as directed by departmental offiers The sample shall be got approved by the Executive Engineer.

Supply of special type plastic chairs for Dining chir.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of Marriage hall Cusion chair 1. SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0..1 cm. thick hot pressed plywood and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam should be designed with contoured lumbar support for extra comfort. BACK SIZE: 49.5cm. (W) X 45.5cm. (H) SEAT SIZE: 49.5cm. (W) X 43.0cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+1-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. The seat with seat connecting bracket made of 0.3 ±0.022cm. thick. HR steel. FIXED TYPE mechanism: The fixed type mechanism should be without back tilt. 5.TUBULAR UNDERSTRUCTURE: The under structure should be made of Ø2.54cm 2.54±0.03cm.x 0.2 ±0.016cm.thick. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns) The shape, colour, shade and size are as per design as instructed by the departmental officers concern. The rate includes cost of all materials, fabrication, transports and other incidental charges, including fixing in position and excluding GST etc., complete.

Providing and fixing 30mmthick Soap/ oil/sampoo stand 200mm Projection made of 19mm thick plywood with both side and edge face white colour 6mm Solid Acrylic Sheet finish etc., the rate including cost of all Materials and labour charges for cutting and fixing the 19mm thick plywood, 6mm thick solid acrylic sheet and necessary cutting for switch box fittings and complete. The quality and colour for the all items involved are got prior approval from the executive engineer before use on work.

Design supply & installation of Glass Shower Cubical Glazing with door system. The Cubical System held with Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 10mm clear toughened saint gobain or approved equivalent make . The joints between glass panels (3 to 5mm) and gaps to be filled with clear weather sealant, so as to make the entire system fully water proof & dust proof. Rate inclusive of all materials such as SS Spider fittings, labour, lead and lift, transports, wastage, accessories etc., all complete as per technical specification and the direction of engineer in charge.

Supplying , fixing and placing towel rack fixing. Made Hindware Bathroom Accessories-Stainless Steel 304 Grade Folding Towel Rack for Bathroom The shape, colour, shade and size are as per design as instructed by the departmental officers concern. The rate includes cost of all materials, fabrication, transports and other incidental charges, including fixing in position and excluding GST etc complete.

Hand Wash Sink - Wall Mounted:- Made: Supply and Fixing Hand wash Sink - Wall Mounted of Size 1.82m (L) x 0.50m (B) x 0.35 (H) + 8" Splash made out of 16 SWG SS 304 Grade Sheet Fabricated Model: Front Side Tapper Model, Back Side Straight Model 4 Taps Holes & 4 Nos Tap.

ADUPPU:- For Dosa, Appam & Boonthi Body: tt'is made out of SS 304 Grade 16 SWG SS Sheet Frame & Top: MS Angle Frame & 6 mm MS Plate Cutting Top Covering: 4 Side covering, Side glass wool & fire brick Insulation with ss 4" Square Chimney Pipe Burners: T 78 Burner 1 Nos Leg: 11/2" SS 304 Grade pipe with adjustable bootDimension: 34" OD X 26" ID X 30"

DOUBLE BURNER (PUUYOGARA) Frame: 1 ¼" x ¼" MS Angle Top & Cover: 16 SWG & 18 SWG 304 Grade SS Sheet leg: 16 SWG 1 ½" 304 grade SS square tube With adjustable nylon boot -Cast Iron Grate :16" Burners: G10 2 No Dimension: 54" x 24" x 18" Ht

LPG GAS LINE WORK 10 MANIFOLD SYSTEM MS 1/2" Gasline Pipe, 1/2" MS Bend, 1/2" MS Elbow, Gas line Union, 3/8 MS BUSH, Clamp, 1/2" GAS line Oummy-1, Red Paint· 1/2l, Wood- 1 Pack, 1/2" Ball l Set Valve -4 , Wooden Screw-1 Packet, Rod- 1 Packet, 1/2" Hex Nipple, 1/2" Tee,4" Reg,2" Reg,Meter,Adaptor,NC Valve, Flexible Hose, Caller & Other Unit Fitting Materials. Inclusive of labour Charges

BATTER STAND Top: 16 SWG SS Sheet. Bottom: 18 SWG SS Sheet. leg: 16 SWG 1 ½" SS square tube With adjustable nylon boot Dimension: 16" x 16" x 32" Ht

DELIVERY STAND WITH OIL FILTER Made: It is made out of 18 SWG / 16 SWG SS 304 Grade Sheet Fabricated Filter: 22" x 22" x 8" Depth (Both Side Tapper with SS Stand With Oil Collection Tray Dimension: 22" x 22" x 30" Ht

SS BATTER MIXER Made: It is made out of Fully SS Sheet Fabricated. Food Contacting SS304 Grade Gear Box Setup Motor: 1 HP, Three Phase Capacity: 50 Kg

SS TRAY It is made out SS 1.2 mm 304 Grade N4 Sheet Fabricated Dimension: 18" x 16" x 211 Depth

POT RACK - 4 TIER I : Leg 11/2" Square Pipe. Frame & Support 1 1/2" x 3/4", 3/4" Square Pipe Dimension: 72" x 24" x 66" Ht

SUCTION HOOD SS Suction Hood for Dosa, Appam, & Poondhl Burner • 3 Nos, Double Burner for Pullyogara • 1 Nos Specifications: Made out of 304 1 Set 19 Grade N4 Finish 1 MM SWG SS Sheet with removable SS Filter. Designed and Fabricated for easy Dimension: 48" L x 24" Ht Length: 21 Feet

SS SUCTION HOOD SS Suction Hood for Burner - 2 Specifications: Made out of 304 Grade N4 Finish 1 MM SWG SS Sheet with removable SS Filter. Designed and Fabricated for easy Dimension: 48" L x 24" Ht Length: 16 Feet

GI DUCT GI Running Pipe for Dosa Plate Specifications: Made out of 24 SWG GI Sheet Length: 81 Feet

GI BEND GI Bend for GI Running Pipe Set Specifications: Made out of 24 8 Nos SWG GI Sheet 8 Nos

BLOWER WITH MOTOR MS Blower attached with Motor for Suction Specifications: With Dynamic 2 Balanced Impeller with Motor: 3 HP 3 Phase Motor Capacity: 3 HP

SS DELIVERY TROLLEY Top: 5" Depth SS Dismantle Tray Bottom: Under Shelve with 3 Side : ss covering (Handle Side Open) Leg & Handle: It is made out of SS 304 Grade 1.6 mm 11/2" Sq. Pipe Fabricated Top & Bottom Tier Attached with 4 Nos of 6" wheels Dimension: 40" x 3611 x 38" Ht

DOSA STORAGE TRAY WITH STAND It is made out SS 304 Grade Sheet 11 Fabricated Tray Dimension: 44" x 44" x 5" Depth Stand Dimension: 29" Ht+ S" Tray Depth

SS OIL KADAI LID Stainless steel Dimension - 32'' OD

SS DOSA DELIVERY TRAY Stainless Steel 1.2 mm SS 304 29 Grade N4 Dosa Delivery Tray 100 nos of dosa Capacity with Lid Dimension: 30" x 30" x 8" Depth

SS PROVISION RACK - 5 TIER (FOR STORAGE) Made: SS 304 Grade 1.2 mm Sheet Fabricated 5 Tier SS Rack 2 Covering: 3 Side SS Covering Leg: 1 1/2'' SS 304 Grade Sq Pipe with adjuatable nylon boot Dimension: 84'' x 20" x 84" Ht

PREPARATION TABLE Top: Granite Made: It is made out of SS 304 Grade Sheet Fabricated Dimension: 84" x 30" x 36" Ht+ 6" Splash

SS TOOL It is made out of ss 304 Grade sheet fabricated Dimension: 24" Ht

SINGLE SINK WITH STAND It is made out of 16 SWG 304 Model: Straight Model (Tap Costs 45 Extra) Waste Water Coupling Sink Dimension: 18" x 18" x 10" Dimension: 24" x 24" x 33" Ht+ 6" Splash

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Lower End

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Lower End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point (8 points / Coil) Lower End

Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of 4' 40W LED fitting with LED on conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of 18W LED square type Recessed / surface fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 24W LED 2x2 square type Recessed / surface fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 9W LED bulb for BH point

Supply and fixing of 20W LED Mirror fitting battern with LED with PVC unsheathed copper leads from terminals to the fitting (Higher end)

Supply and fixing of WT Bulk head fitting with guard and 15W LED bulb

Supply and fixing of Ruby model 40W LED post top lantern with suitable GI pipe of lenght one feet on the Gate pillar with 1/2feet in the pillar and 1/2 feet above pillar with PVC unsheathed copper leads from the Junction box control to gate light (Higher end)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MSclamps and with painting

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm fan down rod on exisitng fan clamp

Supply and fixing of 300mm (12") sweep (Heavy duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 2nos.6A two module 3 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no. 16A module 3 pin socket with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 2nos.6/16A two module socket , 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete.

Supply and fixing of 32A FP MCB in sheet steel enclosure box with electrical connections complete.

Supply and fixing of SMC box for External lights

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm PVC copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm PVC cu wire and making good of the concealed portion with suitable colour

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm PVC cu wire and making good of the concealed portion with suitable colour

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm PVC cu wire and making good of the concealed portion with suitable colour

Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm PVC cu wire and making good of the concealed portion with suitable colour

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming 1 no. 32A 3P MCB & 9 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCCB switch as incoming and 1 no. 63A 3P MCB ,9 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCCB switch as incoming and 2 nos. 63A 3P MCB ,12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply , Erection Testing and commissioning of 415V/50 HZ 400A Cubical panel board with centre switches Chamber the bus bar chamber and cable chamber on extreme end with 16 SWG thick CRCA sheet with 1”x 1/2 ” tinned copper flats for 3 phases and neutral with 6mm hylem sheet separation of 3 phases and neutral and with synthetic moulded insulators bus supports at equal intervals as per IS specification and 2 runs of 1”x 1/8” copper flat on rear side of the panel board for earth buses and Digital L&T make Digital Multifunction meter.with suitable CT coil , with 3 nos. LED pilot lamps set withfuse base, top & 10A HRC Fuse link for 3 phases on a separate Chamber and with the following switches complete. 400A TPN switch with disconnector fuse unit (L&T/eq.) -1no. 100A TPN switch with disconnector fuse unit (L&T/eq.) -10 nos 63A TPN switch with disconnector fuse unit (L&T/eq.) -5nos.

Supply ,Erection ,Testing and commissioning of Three compartment LTCT meter box made up of 16 SWG CRCA sheet steel ( Length 1200mm x Height 1200mm x width 600mm) with door and lock & key arrangements on suitable angle iron frame support for floor / wall mounting support with supply and fixing of the following interior mounting arrangements with busbar chamber, meter chamber and Terminal box chamber confirming to IE rules. i.The busbar chamber will consist of 4 nos. 2” x 1/4” tinned copper flat for phase and neutral busbar on epoxy mounted bus insulated at proper and sufficient spacing between the bus bar as per IE Rules. ii. 3 nos. 200/5A CT coil mounted in Three phase busbar. iii. Interconnection between CT coil to 4 way terminal box and 4 way terminal box to Meter box by 4 sq.mm PVC cu.wire. The LTCT meter box should be powder coat paint of approval colour , approved by site officer.

Supply and fixing of 400 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only

Supply and Laying of 2C x10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 2Cx10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 2C x 10 sq.mm. PVC armoured LTUG cable with earth connection

Supply and clamping of 3.5Cx35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 3½ x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3.5Cx240 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamp

Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/supports on wall/floor/ground for earth connection.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth Connection

Design, engineering , supply erction ,testing ,commissioning and handling over of the 8 persons capacity (544kg) passenger lift, gearless with machine room as per the following technical specification.

28) Servicing and maintenance: Lift contractor should provide free comprehensive servicing and maintenance during the guarantee period. 29) Automatic Rescue Device To facilitate the landing of the lift to the nearest floor at the time of power failure This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc Complete with all accessories. 30) Provision if Intercom with phone. To be provided by the lift contractor 31) Lift license Preparation of drawings, lift contractor should do payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act. 32) Floor announciator with music. To be provided in the car 33) Special features: (a) Battery Operated Emergency Light and Alarm (b) Call Register Signal And Vf Door Operator (c) Automatic Rescue Device. (d) Stainless Steel Button with S S. Cover. (e) Dot Matrix Led D & P Indicators in Car & Landings-Orange Colour. (1) Floor Annunciator with Music (g) Firemans Switch (h) False Ceiling in Car (1) Fire Rating of Landing Doors-One Hour (i) Infra Red Door Screen (k) Overload warning Indicator (1) Laminated Mirror At Rear Side. (m) Scaffolding (n) Two way Intercom with press & speak in Cop o) Provision for Fpabx (p) Free Service for One Year (q) Pit Ladder (r) Ss Handrail (s) Lift License (t) Minor Builders Work (u) Provision for Cctv Camera lp (Cat6 Flat Travelling Cable)

34) Over speed governor, phase failure and phase reversal relay, alarm bell, T Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro magnetic brake with compression spring etc. 35) Guarantee: Gurantee for the materials and lift firm should offer workmanship of equipments complete for a period of not less than one year.

Design, engineering, supply, erection, testing, commissioning and handling over of the 13 persons capacity (884 kg) passenger lift, gearless with machine room as per the following technical specification:

24) Minor builder works: To be provided by lift contractor. 25) Scaffolding: To be provided by lift contractor. 26) Stainless steel Sill angles and facia plates: T27) Steel for lift machinary :- To be provided by the lift contractor. 28) Servicing and maintenance: Lift contractor should provide free comprehensive servicing and maintenance during the guarantee period. 29) Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc. Complete with all accessories. 30) Provision if Intercom with phone:- To be provided by the lift contractor 31) Lift license: Preparation of drawings, lift contractor should do payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act. 32) Floor announciator with music: To be provided in the car. 33) Special features: (a) Battery Operated Emergency Light and Alarm Bell (b) Call Register Signal And Vf Door Operator (c) Automatic Rescue Device. (d) Stainless Steel Button with S.S. Cover. (e) Dot Matrix Led D & P Indicators in Car & Landings - Orange Colour. (f) Floor Annunciator with Music. (g) Firemans Switch (h) False Ceiling in Car. (i) Fire Rating of Landing Doors-One Hour (j) Infra Red Door Screen (k) Overload warning Indicator (l) Laminated Mirror At Rear Side. (m) Scaffolding (n) Two way Intercom with press & speak in Cop (o) Provision for EBABX

(p) Free Service for One Year (q) Pit Ladder (r) Ss Handrail (s) Lift License (t) Minor Builders Work (u) Provision for Cctv Camera - Ip (Cat6 Flat Travelling Cable) 34) Over speed governor, phase failure and phase reversal relay, alarm bell, T Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro magnetic brake with compression spring etc. 35) Guarantee: Gurantee for the materials and lift firm should offer workmanship of equipments complete for a period of not less than one year.

Supply, Erection, Testing, Commissioning and Handing over of 1 No 125 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below with AMF panel. 1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 400 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins/ Ashok Leyland/ Greaves/Equivalent)

1. Dry type Air cleaner 2. Expansion bellow 3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter(pre and micro 8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10. 24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate 13. Residential Mufler 14. Fly wheel with starter ring. ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator. SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure 2. High Water temperature 3. Vee-belt failure and over speed 4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load2. ALTERNATOR : Alternator capacity of 125 KVA/ 100 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ Greaves/ Equivlent.)

3.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt distance shall be less than 75 DBA average or as per CPCB norms. Surface treatment – Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and posphating. The canopies are passed through seven – tank The canopies are passed through seven – tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature.No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade. 4. FUEL TANK : 350 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance. 5. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges.

Construction of RCC foundation of size 5500 (L) x2000(B) x 1200mm (H)( 250KVA Gen set weight approximately weight 4500 kg) with cement concert 1:2:4 with sand cushion all around the foundation for the erection of 125 KVA DG set with proper alignment

Supply and Run of 12 core 2.5 sqmm armoured copper control cable FRLS in suitable PVC rigid pipe on wall/Ground/ ceiling with connection (For AMF to 125KVA Genset)

Supply and installation of exhaust piping of sufficient length with suitable MS pipes so as to extend outside the generator room with necessary thermal insulation.

Charges for filling of diesel for test and initial run of Generator

Supply and fixing of 1500W automatic electric water heater of 35 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection

Supply and installation of 2.0TR capacity 3 star rated energy efficient Hi-wall mounting split type Air-conditioning unit consisting of outdoor condensing unit complete with hermetically sealed Air compressor with R32/R410A refrigerant air cooled condenser ,fan etc., and 1 number indoor unit comprising evaporator unit with cooling coil,blower motor and connected accessories,control etc., with copper refrigerant piping and cord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V +/- 10% 50 Hz single phase A.C. supply adhering following norms a) Nominal Cooling capacity -23300 BTU/Hr b) Air flow rate - 450 CFM c) Noise level -48/40/32 db

Supply and laying of 5/8” and 3/8” copper pipe (beyond 3 mts length)

Supply and fixing of MS stand for fixing out door unit.

Supply and installation of 5 KVA capacity automatic voltage stabliser with time delay relay

supply and fixing of water drain pipe line.(1" PVC drain )

Supply and laying of 3 core 4 sq.mm PVC sheathed copper wire along with copper pipe line (MR)

Supply and Installation 4 MP IP Fixed Bullet /Dome Camera High quality ,Excellent low-light performance with powered-by-DarkFighter technology.Efficient H.265+ compression technology.Clear imaging against strong back light due to 120 dB true.WDR technology.Focus on human and vehicle targets classification based on deep learning .Expansive view up to 50m IRdistanceAdvanced streaming technology that enables smooth live view and data self-correcting in poor network Water and dust resistant (IP67).Line crossing detection, intrusion detection, region entrance detection, region exiting detection. (Make : Hikvision /Honeywell/ D link/eq.)

Supply and Installation of 8TB built in Hard Disc Drive. (Higher end )

Supply and Installation of 43 inches LED Monitor 24x7 with following features :LED backlit technology with full HD 1920 x 1080 , 32" LED backlight monitor ; 16.7 million colors display images perfectly ;Multiple interfaces: HDMI, VGA, audio in ; Built-in speaker ; Wide viewing angle: Horizontal 178°, Vertical 178° ; 24/7 operation ; LED backlit technology with full HD 1920×1080 ; 16.7 million color, display picture perfectly ; HDMI support up to 1080P ; Multiple inputs: HDMI, VGA ; Build-in speaker，Audio 5W*2 ; Auto signal input Detection ; Smart engine for Phase/Image position/Color calibration ; Plastic casing ; Narrow front Bezel. (Higer end)

Supply and Installation of 8 Port Gigabit POE Switch up to 300 m Long range performance may vary depend on camera model or cable condition.6 × gigabit PoE ports, 2 × gigabit Hi-PoE ports, 1 × gigabit RJ45 port, and 1 × gigabit fiber optical port. IEEE 802.3at/af/bt standard for Hi-PoE ports (Max. 90 W PoE output). IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output).IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard. 6 KV surge protection for PoE ports. Up to 300 m long-range transmission. PoE watchdog to auto detect and restart the cameras that do not respond. Port isolation to improve network security. Gigabit network access design. Wire-speed forwarding. Store-and-forward switching. Solid high-strength metal shell. Reliable fan-free design. UL (UL 60950-1), CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) (Make : Hikvision /Honeywell/ D link/eq.)

Supply and laying of CAT 6 un armoured cable in exisitng PVC pipe. (Higher end)

Supply and laying of 25mm dia PVC rigid pipe with PVC accessories on wall / ceiling/floor.

Sub Total

GMS Elegant Builders I Pvt Ltd (BID ID -1405039)