EMERGENT REPAIR AND RENOVATION OF PUBLIC AND COMMUNITY TOILET BLOCKSUNDER THE JURISDICTION OF SDE, MC PH SUB DIVN. No. 1, CHANDIGARH (CH. TO. REVENUE HEAD).

12 mm cement plaster: 1:4 (1 cement : 4 fine sand) (As per DSR I. No. 13.1.1)

Providing and laying in position cement concrete of specified grade the cost of centering and shuttering -All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) (DSR I. No. 4.1.8)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand). (As per DSR I. No.14.1.1)

Providing and laying water proofing material on cement plaster in proportion recommended by the manufacturer of Make: Pidilite/Bostik (NS)

Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).[For Barrier Free Toilet Block] Dark shade pigment using ordinary cement (DSR I. No.11.20.3)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White (DSR.I.No.17.18.1)

Providing and fixing floor CP grating heavy duty complete in all respects. (NSI)

Providing and fixing of looking mirror of size 5'3'' x 3'0'' with outer wooden frame having hard board at back side complete in all respect. (NSI)

Providing and fixing of Angular stop cock with flange of Jaquar Make etc complete in all respects (NSI)

Providing and fixing of bib cock with flange of Jaquar Make etc complete in all respects (NSI)

Providing and fixing of wash basin pillar cock of Jaquar Make complete in all respects (NSI)

Providing and fixing of CP jall with cut including fixing with white cement etc. complete in all respects (NSI)

Providing and fixing of PVC connection 600mm alongwith blare nuts pipe complete in all respects. (NSI)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x16mm (DSR. I. No.9.97.2)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. 250x16mm (DSR I.No.9.100.1)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper (DSR. I. No.9.101.2)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32mm dia (DSR I. No.17.28.1)

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR. I. No. 15.52)

Providing & fixing of exhaust fan 300mm sweep of Make: complete in all respects including wiring etc. (NSI)

Providing and fixing the louvers complete with frame for exhaust fan of 9" diamete. (NSI)

Providing & fixing of 40 watt single rod tube light fittings of Make: complete in all respects including chokes, starter. (NSI)

Providing and fixing 50 watt LED flood light with bracket outside on the wall complete in all respects. Make: Crompton/Havels/Syska/Bajaj (NS)

Providing & fixing of ceiling fan 1200mm sweep of Make: complete in all respects (NS)

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge.(DSRI.No.14.82)

Providing and fixing grabe rail of stainless steel pipe 1" dia. chrome sheated stainless steel grab rail at height of 2'-6'' with minimum 2'' clearance and fitting of grade AIS: 304 as per JIS standard 3448 including cutting and making good the walls complete as per direction of Engineer-in-charge. (NSI)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Make: (DSR I. no. 17.1.1)

Providing and fixing incinerator complete in all respect. (NSI)

Repair of Vending Machines/ Incinerator by replacement of various part complete in all respects.(NS)

Providing and fixing of Hand Drier of reputated make: Viking (NSI)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR. I. No. 17.71)

P/F of Tissue Paper Holder (NSI)

Providing and placing PVC mat 15mm thick

Providing and placing PVC POT (Gamla) Size 18",12" dia Green in colour including decoretive plant. (NS)

Plastic Mug (1.5 Ltrs.)

Small dustbin (Plastic) 8 Ltrs.

Providing & fixing of Handicap Seat complete in all respects (NS).

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DSR I. No. 10.25.2)

Repairing of Aluminium door of Gents and Ladies side public toilet by replacement of broken laminated board including replacement of missing aluminium beeding insertion rubber hardware etc. complete job with labour charges for dismentling and refixing the same at site. (NSI)

Providing and fixing of 5mm thick pressed Aluminium composite Particle sheet confirming to IS-Grade panelling fixed in Aluminium door, windows, shutters as per architectural drawings and as per direction of EIC. Decorative laminations of both sides. (NSI)

Providing and fixing water meter cover made out of MS angle frame 25mm x 25mm x shutter 20mmx 20mm x 5mm MS sheet 18 gauge with locking arrangement primer painting complete in all respects. (NS)

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire (DSR I. No. 16.18.1)

Refencing and stretching of disorderd disarranged barbed wire over the angle iron posts provided with horizontal lines and diagonal lines interwoven with horizontal lines between conrete pillars fitted and fixed with G.I tapies turn buckles etc. including labour charges cost of painting of barbed wire with synthetic enamel paint of approved brand complete in all respect. (NSI)

R.C.C. Standard post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately).(16.15.1)

Providing and fixing Sun board signages 12'' x 12''(Gents/Ladies/Differently abled/Transgender/Child Friendly/No Smoking/Barcode etc.) in postion at required place to the entire satisfaction of Engineer Incharge.(NSI)

Writing of slogan and making drawings/images regarding promotion/awareness of swachh bharat abhiyan etc. including cost of quality paint, brush, labour complete in all respect as per direction of EIC. (NSI)

Providing and fixing of hoarding of sunboard material on wall of toilet block for promotion of Swachhta Abhiyan Mission of required size:3'0''x 2'0'' complete in respect as per direction of EIC. (NSI)

Providing and fixing of Toilet-ID board of sunboard material on wall of toilet block for information to public about contact numbers of JE & Agency, Opening & Closing Time of Toilet Block of required size:3'0' 'x 2'0'' complete in respect as per direction of EIC. (NSI)

Providing and fixing steel direction boards of 50 Mtrs, 100 Mtrs. & 200 Mtrs. Including cost of cement concrete, painting of board and letter writing on boards etc. (NSI)

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable material into municipal dumps : (100 mm diameter) (DSR I. No. 19.5.1)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and for all lift, as directed by Engineer-in-charge. All kind of soil (DSR I. no. 2.6.1)

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete: (150 mm diameter) (DSR I. No. 19.1.2)

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design. (150 mm diameter) (DSR I. No. 19.2.2)

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : (For pipes 100 to 250mm diameter) (DSR I. no. 19.21.1)

Please Enable Macros to View BoQ information