Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-Finance NEAR ST XAVIER S SCHOOL BABINA CANTT DISTT JHANSI UP 284401 | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-Finance Being L1 | |
| 2 | L2₹40.0 L+₹1.5 L (3.85%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹40.8 L+₹2.3 L (6.05%)Rejected-Finance 704 NEW PUMP HOUSE NEAR RED ROSE SCHOOL BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹42.9 L+₹4.4 L (11.5%)Rejected-Finance C 40 BHAGAT SINGH NAGAR BHIND ROAD GWALIOR MP 474005 | NA | NA | 474005 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹44.4 L+₹5.9 L (15.4%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | classic contriction co. L5 | m/s gupta trading L2 | Raja enterprises L8 | M/S Chadha Brothers L6 | M/s Pratham Enterprises L3 | VEER SINGH CONSTRUCTION L1 | SHRI HARI CONSTRUCTION L4 | M/S Kharya Associates L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.01 | M& L for demolition cement concrete of any description in any position not otherwise specifically provided including existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime coba 50 to 100mm thick mud phuska/cement concrete/lime coba etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush and removing debries/rubbish off materials out side of Ministry of defence (MOD) land complete all as specified and directed. | 103 | Cum | 110 ₹11,330 | 100 ₹10,300 Lowest | 350 ₹36,050 | 250 ₹25,750 | 100 ₹10,300 Lowest | 300 ₹30,900 | 300 ₹30,900 | 200 ₹20,600 |
| 2.00 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. | 154 | Cum | 1,850 ₹2,84,900 | 1,500 ₹2,31,000 Lowest | 4,000 ₹6,16,000 | 2,200 ₹3,38,800 | 2,200 ₹3,38,800 | 1,800 ₹2,77,200 | 2,000 ₹3,08,000 | 2,780 ₹4,28,120 |
| 3.00 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed.
Note :- Water proofing compound shall be measured separately | 2,058 | Sqm | 90 ₹1,85,220 | 75 ₹1,54,350 | 150 ₹3,08,700 | 210 ₹4,32,180 | 85 ₹1,74,930 | 150 ₹3,08,700 | 190 ₹3,91,020 | 50 ₹1,02,900 Lowest |
| 4.00 | Supply only integral water proofing compound complete all as specified and as directed. | 418 | Kg | 40 ₹16,720 Lowest | 40 ₹16,720 Lowest | 120 ₹50,160 | 80 ₹33,440 | 50 ₹20,900 | 100 ₹41,800 | 80 ₹33,440 | 45 ₹18,810 |
| 5.00 | M&L applying water proofing treatment with the following
(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.
(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.
(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane including Aluminium paint on top surface | 2,058 | Sqm | 320 ₹6,58,560 Lowest | 350 ₹7,20,300 | 350 ₹7,20,300 | 480 ₹9,87,840 | 330 ₹6,79,140 | 380 ₹7,82,040 | 450 ₹9,26,100 | 380 ₹7,82,040 |
| 6.00 | M & L for applying 1mm putty on wall surfaces all as specified and as directed by the Engineer-in-Charge | 4,391 | Sqm | 35 ₹1,53,685 | 40 ₹1,75,640 | 35 ₹1,53,685 | 60 ₹2,63,460 | 40 ₹1,75,640 | 40 ₹1,75,640 | 50 ₹2,19,550 | 25 ₹1,09,775 Lowest |
| 7.00 | M&L for complete removal of existing treatment on wall surface and two coat of exterior emulsion acyrlic weather proof antifungal paint over a coat of exterior grade primer on new plastered surface including preparation of surface complete all as specified and as directed | 1,631 | Sqm | 50 ₹81,550 | 70 ₹1,14,170 | 40 ₹65,240 Lowest | 60 ₹97,860 | 90 ₹1,46,790 | 45 ₹73,395 | 50 ₹81,550 | 60 ₹97,860 |
| 8.00 | M&L for complete removal of existing treatment on wall surface and two coat of oil bound distemper on old plastered surface including preparation of surface complete all as specified and as directed | 2,350 | Sqm | 48 ₹1,12,800 | 50 ₹1,17,500 | 40 ₹94,000 | 40 ₹94,000 | 30 ₹70,500 Lowest | 35 ₹82,250 | 40 ₹94,000 | 40 ₹94,000 |
| 9.00 | M & L for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed. | 1,512 | Sqm | 15 ₹22,680 | 3 ₹4,536 Lowest | 20 ₹30,240 | 10 ₹15,120 | 30 ₹45,360 | 10 ₹15,120 | 10 ₹15,120 | 10 ₹15,120 |
| 10.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | 839 | Sqm | 15 ₹12,585 | 5 ₹4,195 Lowest | 22 ₹18,458 | 10 ₹8,390 | 5 ₹4,195 Lowest | 10 ₹8,390 | 10 ₹8,390 | 20 ₹16,780 |
Tender Value
₹48.2 L
EMD Value
₹96,320
Closing Date
13 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Babina
GE Babina PIN-284401
SPL REPAIR FOR ROOF TREATEMENT AND MISC B/R WORKS TO BLDGS NO P-45 AND P-46 UNDER AGE B/R-I BABINA AT GE BABINA CANTT
2025_MES_720645_1
8397/E8
Open Tender
Civil Works
Item Rate
180 days
GE Babina
As per tender documents
8 documents required · 8 mandatory
₹500
GE Babina
₹96,320
Yes
6 Sept 2025
15 Jul 2025
15 Aug 2025
15 Jul 2025
13 Aug 2025
30 Jul 2025
Amount
M& L for demolition cement concrete of any description in any position not otherwise specifically provided including existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime coba 50 to 100mm thick mud phuska/cement concrete/lime coba etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush and removing debries/rubbish off materials out side of Ministry of defence (MOD) land complete all as specified and directed.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately
Supply only integral water proofing compound complete all as specified and as directed.
M&L applying water proofing treatment with the following (a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated. (b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction. (c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane including Aluminium paint on top surface
M & L for applying 1mm putty on wall surfaces all as specified and as directed by the Engineer-in-Charge
M&L for complete removal of existing treatment on wall surface and two coat of exterior emulsion acyrlic weather proof antifungal paint over a coat of exterior grade primer on new plastered surface including preparation of surface complete all as specified and as directed
M&L for complete removal of existing treatment on wall surface and two coat of oil bound distemper on old plastered surface including preparation of surface complete all as specified and as directed
M & L for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed.
M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed.
M&L for Vitrified Ceramic tiles light shed 7 -10 mm thick, (square/ rectangular),area of each tile not exc 0.36 sqm,polished, in floors etc.jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L Vitrified Ceramic tiles light shed 7-10 mm thick, (square/ rectangular), area of each tile not exc 0.36 sqm,as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick (400mm x 400mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and as directed.
M&L for glazed coloured tiles 450x300x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed
Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.
Taking down chowkhats or frames with shutters ( without taking off shutters from froms exe 1.5 sqm and n.exe 4 sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters ( without taking off shutters from froms n exe 1.5sqm each complete all as specified and as directed.
M&L, aluminium powder coated/Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
M&L for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. S & F 5.00 mm thick tinted glass in panel of shutter fixed with glazing clips , rubber gasket and powder coated aluminium snap beading so as to make air tight and including S & F powder coated butt hinges type C-1 ,100 mm size 3 nos per shutter , powder coated aluminium handle of 150mm size 2 Nos (One on each side of shutter) , powder coated aluminium tower bolt of size 200 mm ( 2 Nos ) per shutter , mortise lock , brass body ,6 levers ( 1 No) with duplicate keys , aluminium (extruded section) hydraulic door closer regulated designation No-3 Universal type ( 1 No) & Floor door stopper ( 140 mm ) overall ,aluminium body 1 No on each shtter etc complete all as specified and as directed. Note: (i) Shutter ( Glazed ) shall be fixed on frame of required size and shall be measured seperately (iii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . Note : The minimum thickness of powder coating shall be 50 Micron complete all as specified
Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000ltrs etc complete all as specified and directed.
S & F 1000ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.
S&F ball valves of 20 mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed complete all as specified and as directed(Minimum weight 20 gms-210 gms) complete all as specified and as directed.
Dismantling ceiling boards (fiber,PVC,pulp,insulation etc) or wall board complete all as specified and as directed
S&F Gypsum Board false ceiling,6-8 mm thick fixed with clips & screws including GI snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 2 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required with putty and any colour for suspending ceiling/gypsum board complete all as specified and as directed by the Engineer-in-Charge.
S & F false ceiling with 3/4 mm thick Asbestos tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film of size 600 x 600 mm (595 X 595 mm) fixed with clips & screws including silver coating GI snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 2 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required for suspending ceiling work complete all as specified and as directed by the Engineer-in-Charge
S&F for hollow PVC panelling consisting of 5 mm thick plain colour PVC sheet fixing with solvent cement, screw/nails on wall/ceiling for interior decoration complete all as specified and directed.
Taking up or down existing 15mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed.
Taking up or down existing 20mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed.
Supplying, fixing, jointing and testing 15mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.
Supplying, fixing, jointing and testing 20mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.
Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed.
M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed
Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.
M & L 10 mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:6 to be finished fair and even with out suing extra cement.
M&L for external rendering 10 mm thick in CM 1:4 mixed on brick work or concrete surfaces of wall finished even and fair complete all as specified.
M& L for two coat of exterior emulsion acyrlic weather proof antifungal paint over a coat of exterior grade primer including a coat of putty on new plastered surface including preparation of surface complete all as specified and as directed
M & L for applying two coat of oil bound distemper including one coat of putty all as specified and as directed by the Engineer-in-Charge
Demolition of cement concrete(un reinforced) of any description in any position not otherwise specifically provided for etc. complete all as specified and directed.
M&L PCC 1:4:8 type D2 (using 40mm graded stone agg) as in filling and mass concrete, Sub base/flooring complete all as specified and directed.
M&L, for PCC 1:2:4 type B-0 (using 12.5mm graded stone agg) as in coping on side of path including necessary form work etc complete all as specified and directed.
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandt complete all as specified and directed.
S&F in repair 25 mm dia chromium plate curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.
S & F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete complete all as specified and as directed.
S&F 150 mm long aluminum anodized barrel tower bolts of extruded section etc complete all as specified and as directed
S&F aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed.
S&F Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized of100mm size type B-21 complete all as specified and as directed.
S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white Make :- Hindwar with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed.
S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white Make :- Hindwar with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400 mm including taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed.
S & F in repair Vitreous China Urinal, Half stall type (465x355x265mm), white including flushing cistern, flush pipe and waste pipe complete all as specified and as directed
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed .
S&F in repair 15 mm fancy type chromium plated stop valves/angle valve, screwed down high pressure,with crutch or butterfly handle scresed both ends for iron pipe or for unions and fixed complete all as specified.
S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs complete all as specified and as directed.
S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed.
Supply and fix in repairs of size 125 mm brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed
S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flange complete all as specified and as directed.
S & F in repairs Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as specified and as directed.
S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) complete all as specified and as directed.
Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed.
S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed.
S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.
Dismantling Asbestos cement ,galvalume fiber sheet ( Plan corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling of timber scantling 40 sqcm and over for framed work and over in section, in any position complete all as specified and directed.
S & F MS steel work in tubular trusses and tubular posts, purlin including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to I.S.I 1161-1998 Grade ST-240 with one shop coat of zinc chromate primer paint complete all as specified and directed.
M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of rex oxide primer over 10 cm width or girth complete all as specified and as directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.
m/s gupta trading (BID ID -3390725)
M/s Pratham Enterprises (BID ID -3384706)
SHRI HARI CONSTRUCTION (BID ID -3385125)
classic contriction co. (BID ID -3384834)
M/S Chadha Brothers (BID ID -3384869)
M/S Kharya Associates (BID ID -3392032)
Raja enterprises (BID ID -3392372)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .