Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC | ₹33.2 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹37.9 LRejected-Finance 79 B BLOCK SRI GANGANAGAR 335001 RAJ | GANGANAGAR | RAJASTHAN | 335001 | ₹37.9 L | L2 | Rejected-Finance Not the lowest Bidder |
| 3 | Rejected-Technical 1ST FLOOR A 40 RAJPARK SULTANPURI NORTH WEST DELHI DELHI 110086 | NORTH WEST DELHI | DELHI | 110086 | - | - | Rejected-Technical Due to Not enlisted in appropriate Class |
| 4 | Rejected-Technical | - | - | Rejected-Technical Due to not enlisted in appropriate Class |
| Sl No | Description | Qty | Unit | THAKURJI ENTERPRISES L2 | Khatri Trunk Factory L1 |
|---|---|---|---|---|---|
| 1.00 | WOODEN FURNITURE
BED PLY WOOD
S&F in replacement long rail made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable | 20 | Each | 225 ₹4,500 | 125 ₹2,500 |
| 2.00 | S&F in replacement short rail after making the same from long rail complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable Note:- Short shall be from with long rail obtained from srl item No '3' . | 30 | Each | 125 ₹3,750 | 75 ₹2,250 |
| 3.00 | S&F in replacement Legs made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable | 12 | Each | 50 ₹600 | 50 ₹600 |
| 4.00 | M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of bed ply wood top complete all as specified & directed by Engineer-in-Charge. Drg : FD-214, FD-215, FD-245, FD-246, | 50 | Each | 125 ₹6,250 | 125 ₹6,250 |
| 5.00 | TABLE DINING 6 PERS
S&F in replacement front rail of dining 6 persons made out of Ist class Hard Wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 | 60 | Each Rail | 175 ₹10,500 | 75 ₹4,500 |
| 6.00 | S&F in replacement side rail of table dining 8 persons made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 | 64 | Each Rail | 150 ₹9,600 | 50 ₹3,200 |
| 7.00 | S&F in replacement Legs of table dining 6 persons made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 | 70 | Each | 150 ₹10,500 | 50 ₹3,500 |
| 8.00 | M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of table dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239 | 80 | Each | 75 ₹6,000 | 75 ₹6,000 |
| 9.00 | TABLE DINING 8 PERS
S&F in replacement front rail of dining 8 persons made out of Ist class Hard Wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 | 14 | Each Rail | 175 ₹2,450 | 75 ₹1,050 |
| 10.00 | S&F in replacement side rail of table dining 8 persons made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 | 16 | Each Rail | 150 ₹2,400 | 50 ₹800 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹1.1 L
Closing Date
28 Nov 2025, 6:00 pmClosed
HQ CWE SRI GANGANAGAR
HQ CWE POST BOX 48 SRI GANGANAGAR-335001 (Rajasthan)
REPAIR TO WOODEN AND STEEL FURNITURE AT SRI GANGANAGAR MIL STN
2025_MES_727849_2
CA NO CWE SGNR/TOKEN-35 OF 2025-26
Open Tender
Miscellaneous Works
180 days
GE SRI GANGANAGAR
As per NIT
8 documents required · 8 mandatory
₹1,000
GE SRI GANGANAGAR
₹1.1 L
Yes
2 Jan 2026
7 Nov 2025
29 Nov 2025
7 Nov 2025
28 Nov 2025
14 Nov 2025
Amount
WOODEN FURNITURE BED PLY WOOD S&F in replacement long rail made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable
S&F in replacement short rail after making the same from long rail complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable Note:- Short shall be from with long rail obtained from srl item No '3' .
S&F in replacement Legs made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable
M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of bed ply wood top complete all as specified & directed by Engineer-in-Charge. Drg : FD-214, FD-215, FD-245, FD-246,
TABLE DINING 6 PERS S&F in replacement front rail of dining 6 persons made out of Ist class Hard Wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273
S&F in replacement side rail of table dining 8 persons made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273
S&F in replacement Legs of table dining 6 persons made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273
M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of table dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239
TABLE DINING 8 PERS S&F in replacement front rail of dining 8 persons made out of Ist class Hard Wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273
S&F in replacement side rail of table dining 8 persons made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273
S&F in replacement Legs of table dining 8 persons made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273
M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of table dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239
TABLE WRITING S&F in replacement shutter of cup board of the table writing made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275
S&F in replacement side and back of cup board of the table writing made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275
S&F in replacement drawer table writing made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275
S&F in replacement leg table writing made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table writing complete all as specified and directed by Engineer - in – Charge. Drg : FD – 275
SIDE BOARD S&F in replacement Top of side board made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : F-241
S&F in replacement Side of side board made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : F-241
S&F in replacement Back of side board made out of 6mm thick ply wood commercial face both sides ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : F-241
S&F in replacement Drawer of side board made out of 6mm thick plywood commercial face both side ISI marked at bottom and 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg : F-241
S&F in replacement leg of side board made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : F-241
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of side board complete all as specified and directed by Engineer - in – Charge Drg : FD – 241
PEG TABLE S&F in replacement Top of peg table made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-236, FD-277, FD-255, FD-383, FD-384
S&F in replacement leg of peg table made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384
S&F in replacement Long rail of peg table made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384
S&F in replacement short rail of peg table made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table peg complete all as specified and directed by Engineer - in – Charge Drg : FD – 236, FD – 277, FD – 284, FD-383 & 384
TEAPOY VERANDAH S&F in replacement Top of Teapoy verandah made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge
M & L for applying two coat of synthic enamel paint wihite to teapoy Verandha including preparation of surfaces complete all as specified and directed by Engr-in-Change
TABLE DRESSING GENTS S&F in replacement mirror of table dressing Gents complete all as specified and directed by Engineer-in-Charge. Drg No -FD-230, FD-379 FD/E6/MAP /16
S&F in replacement back ply of table dressing gents made out of 6mm thick ply wood ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379
S&F in replacement Top of table dressing gents made out of 12mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379
S&F in replacement drawer of table dressing gents made out of 6mm thick plywood commercial face both side ISI marked at bottom & 12mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge.Drg No -FD-230, FD-379
S&F in replacement mirror frame of table dressing gents made out of Ist class hard . complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table dressing gents complete all as specified and directed by Engineer - in – Charge Drg : FD – 230, FD-379
TABLE DRESSING LADIES S&F in replacement mirror of table dressing ladies complete all as specified & directed by Engineer-in-Charge. Drg : FD-251, FD-378
S&F in replacement 5mm thick sliding glass with aluminium channel (anodised) of table dressing ladies complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378
S&F in replacement Drawer of table dressing ladies, made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378
S&F in replacement back ply of table dressing ladies 12mm thick ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378
S&F in replacement mirror frame of table dressing ladies, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378
S&F in replacement back ply of mirror table dressing ladies 6mm thick ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table dressing ladies complete all as specified and directed by Engineer - in – Charge Drg : FD – FD – 251, FD-378
TABLE CENTRE S&F in replacement top of table centre, made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg :FD-231, FD-274, FD-232, FD-278, FD-382
S&F in replacement Leg of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge
S&F in replacement Long rail of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278, FD-382
S&F in replacement Short rail of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278, FD-382
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table centre complete all as specified and directed by Engineer - in – Charge Drg : FD – 232, FD – 278. FD – 235, FD-382
TEAPOY S&F in replacement Top of Teapoy made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg : FD – 235, FD-382
S&F in replacement Leg of teapoy, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD – 235, FD-382
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table teapoy complete all as specified and directed by Engineer - in – Charge Drg : FD – 232, FD – 278. FD – 235, FD-382
TABLE 900X600 with/without drawer S&F in replacement Top of table size 900 x 600 x 760 mm, made out of 18mm thick prelaminated particle board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg : FD-223,FD-224, FD-283, FD-284
S&F in replacement leg and stiffener of table size 900 x 600 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284
S&F in replacement Drawer of table size 900 x 600 x 760 mm, made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284
S&F in replacement long rail of table size 900 x 600 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284
S&F in replacement short rail of table size 900 x 600 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table 900 x 600 X 760 MM with or without drawer complete all as specified and directed by Engineer - in – Charge Drg : FD – 223, FD – 224, FD – 283, FD – 284
TABLE BED SIDE S&F in replacement Top of table bed side, made out of 18mm thick prelaminated partical beading board ISI marked alongwith 4mm Teak wood beading all around complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248
S&F in replacement Side of table bed side, made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248
S&F in replacement shelf of table bed side, made out of 12mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248
S&F in replacement back ply of table bed side made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table bed side complete all as specified and directed by Engineer - in – Charge Drg : FD – 276, FD-248
TABLE 900X900 S&F in replacement leg of table size 900 x 900 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-291
S&F in replacement rails of table size 900 x 900 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-291
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table 900 X 900 X 760 MM compl ete all as specified and directed by Engineer - in – Charge Drg :FD – 291
HAT STAND S&F in replacement mirror of Hat Stand complete all as specified & directed by Engineer-in-Charge.Drg : FD-235, FD-361
S&F in replacement Front teak face ply of Hat Stand made out of 4mm thick plywood teak face at one side and commercial face at other side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361
S&F in replacement Back Ply of Hat Stand made out of 4mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361
S&F in replacement Beading 35mm wide, 6 mm thick alround the hat stand made out of teak wood complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361
S&F in replacement Copper oxide steel pegs 120 mm long of Hat Stand complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Hat Stand complete all as specified and directed by Engineer - in – Charge Drg : FD – 233 FD-361
BOOK CASE S&F in replacement Top of Book case size 1065x300x19mm, made out of 19mm thick block board ISI marked with 1mm thick laminated sheet and complete all as specified & directed by Engineer-in-Charge.Drg : FD-45(m), FD-237
S&F in replacement shutter of Book case size 1065x300x19mm, made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237
S&F in replacement shelf of size 380x205x18mm /shelf (size 735x275x18mm) of Book case made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237
S&F in replacement back ply of Book case made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237
S&F in replacement Leg of Book case made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237
S&F in replacement MS Hinges medium weight cold rolled of size 50mm long of book case complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Book Case complete all as specified and directed by Engineer - in – Charge Drg : FD – 45 (M) , FD-237
TABLE COMPUTER S & F in replacement of key board fitted with telescopic channel MS drawer slides all shown on drawing . FD/E6/ MAP/03
S & F in replacement of Drawer with lock made out of 6mm thick plywood commercial face both side at bottom and 18mm thick pre-leminated particla board at side front and back FD/E6/ MAP/03
S & F in replacement of 18mm thick prelaminated particle board pull out tray for mouse on telescopic channel FD/E6/ MAP/03
M & L for applying two coat of synthetic enamel paint including preparation of previously treated/old steel surface of table conputer complete all as specified and directed by Engineer -in- Charge.
S&F in replacementof Nylon buffers and PVC Shoes of table computer complete all as specified and directed by Engr-in-Change. FD/E6/ MAP/03
ALMIRAH MESS UTENSIL S&F in replacement Top of Almirah Mess utensils size 1065x434x19mm, made out of block board ISI marked covered with 1mm thick laminated sheet along with 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-93
S&F in replacement Shelf of Almirah Mess utensils size 1025x420x 19mm, made out of planks of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-93
S&F in replacement Back Ply of Almirah Mess utensils size 1065x1570x10mm, made out of 10mm thick plywood commercial face both sides ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-93
S&F in replacement Shutter of Almirah Mess utensils made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet comp lete all as specified and directed by Engineer - in – Charge. Drg : FD-93
S&F in replacement Aluminium handle anodised 100mm long and hasp & staple 75mm long of aluminium anodised complete of Almirah Mess utensils complete all as specified and directed by Engineer - in – Charge. Drg : FD-93
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Almirah Mess Utensils complete all as specified and directed by Engineer - in – Charge Drg : FD – 93
S&F in replacement knob of CP Brass as per existing design and size to various wooden furniture where as required complete all as specified and directed by Engineer - in – Charge
PVC RECEPTACLE S&F in replacement receptacle PVC made out of 22 gauge PVC sheet complete all as per drawing complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/13
SOFA CUSHION S&F in replacementof 100 mm thick foam rubber cushion of size 530x560 mm , 32 density duly covered with tapestry cloth for seat and back complete all as specified and directed by Engineer-in-Charge. Note : Tapestry cloth should not be not less than the rate of Rs 300/- per mtr Drg : FD-258 , FD-281 and FD -373, FD-MAP-II Note:- Sample of cloth should be approved by BSO/GE
SOFA SET SINGLE SEAT S&F in replacement of arm of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change .Drg : FD-258 , FD-281 and FD -373 and FD Map-II
S&F in replacement leg of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II
S&F in replacement side rail (size 100 mm x 35 mm) of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373
S&F in replacement front rails of sofa set seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change . Drg : FD-258 , FD-281 and FD -373 and FD Map-II
S&F in replacement (seat and back) batten of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Sofa set single seater complete all as specified and directed by Engineer - in – Charge Drg : FD-258 , FD-281 and FD -373 and FD Map-II
SOFA SET THREE SEATER S&F in replacement of arm of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change .Drg : FD-258 , FD-281 and FD -373 and FD Map-II
S&F in replacement leg of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II
S&F in replacement side rail (size 100 mm x 35 mm) of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373
S&F in replacement front rails of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change . Drg : FD-258 , FD-281 and FD -373 and FD Map-II
S&F in replacement (seat and back) batten of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II
S&F in replacement bottom rail of seat and back of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directed by Engr-in-Change Drg : FD-258, FD-281 and FD-373 and FD Map-II
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Sofa set single seater complete all as specified and directed by Engineer - in – Charge Drg : FD-258 , FD-281 and FD -373 and FD Map-II
TABLE DINING OR's S&F in replacement members of frame of table dining ORs/Forms with or without back such as legs, stiffeners etc made out of M.S. pipe 25 Sqmm (16 gauge wall thickness) including cutting, welding, bending etc providing one coat of red oxide primer complete all as specified and directed by Engr-in-Change Drg : FD-165 (M) 77 (M) 78 (M)
M & L for applying two coat of synthetic enamel paint including preparation of previously treated/old steel surface of mild steel tube frame of table dining ORs complete all as specified and directed by Engineer -in- Charge. Drg : FD-165 (M)
Chair dining cushioned MAP S&F in replacement of Seat cushion of chair dining cushioned, 75mm thick of 32 density duly covered with tapestry cloth complete all as specified and directed by Engr-in-charge.Drg : FD/E6/MAP-II/04 Note :- Tapestry cloth should not be less than the rate of Rs. 300/- per RM.
S&F in replacement Front leg and rear leg each of chair dining made out of 1st class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04
S&F in replacement Front/side/back rail/Stiffener of chair dining made out of 1st class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04
M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of Book Case complete all as specified and directed by Engineer - in – Charge Drg : FD/E6/MAP-II/04
Canning of Chair Dining, Chair Easy, Chair Writing and Stool Dressing Taking down un-serviceable plastic cane and re-canning with new 2mm wide half round plastic cane except that of border which shall be 3 mm flat superior quality cream / white colour and weaving in accordance to Godrej pattern as shown on DRG NO.FD-03(M),FD-279,FD-229,FD-280 and as applicable complete all as specified and directed by Engineer – in - Charge. (Make of cane : Shah & shah / M/s Premier/ Indian Plastic)
Chair Wooden Bottom S&F in replacement Front leg and rear leg each of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225, FD-285
S&F in replacement Front rail/back rail/side rail /stiffener of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285
S&F in replacement back rest of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285
S&F in replacement Seat (Made out of BWR plywood commercial type 6 mm thick ISI marked) of chair wooden Bottomcomplete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285
M & L for preparing of all exposed wooden or wood based surfaces of chair wooden without arms and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge DRG NO.FD-56,FD-285
Chair Dining S&F in replacement Front leg and rear leg of chair dining using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-279,FD-16
S&F in replacement Front rail/back rail/side rail/stiffener of chair dining using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16
S&F in replacement back rest of chair dining using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16
M & L for preparing of all exposed wooden or wood based surfaces of chair dining and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-16,FD-228,FD-279
Chair Writing S&F in replacement Front leg/rear leg of chair writing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280
S&F in replacement Front rail/back rail/side rail/stiffener of chair writing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280
S&F in replacement Back rest of chair writing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280
M & L for preparing of all exposed wooden or wood based surfaces of chair writing and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280
Chair Easy S&F in replacement Front leg /Rear leg of chair easy using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201
S&F in replacement Arms of chair easy using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201
S&F in replacement Rail of seat frame/back frame of chair easy with triangular shape in supporing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201
M & L for preparing of all exposed wooden or wood based surfaces of chair easy and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-229,FD-201
Stool Dressing Cushioned S&F in replacement Cushion (50mm thick of 32 denasity) with tepastry cloth cover as per existing design of Stool dressing cushioned complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP Note:- Tapestry cloth shall be of superior cloth of costing not less than Rs 275 per meter with 1.25 meter width as apptoved by BSO
S&F in replacement leg/front rail/side rail of Stool dressing cushioned using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP
M & L for preparing of all exposed wooden or wood based surfaces of stool dressing cushioned and applying two coats of Melamine polish complete all as specified and directed by Engineer-in-Charge.DRG NO. FD-282&TP,FDE6/MAP/14
Table dining 1200mm x 900mm x 760mm S&F in replacement leg of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273
S&F in replacement Long rail and short rail each of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273
M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface of table dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239
Desk S&F in replacement Box of desk made out of 18 mm thick pre-laminated partical board including 4mm thick teak wood beading complete all as specified and directed by Engineer-in-Charge Drg : FD-107 (M) & FD-1021
M&L for applying two coat of synthetic enamel paint (existing paint/silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of desk complete all as specified and directed by Engineer-in-Charge. Drg : FD-107
Bin Multipurpose S&F in replacement Shutter made out of 18 mm thick prelaminated particle board with piano type hinges as per existing to Bin multipurpose MAP with handle 10mm long complete all as specified and as directed by Engineer-in-Charge Drg : FD/E6/MAP/09
S&F in replacement drawer as per existing and as shown on drg to Bin multipurpose MAP complete all as specified and directed by Engineer - in – Charge.Note :- Tapestry Cloth should not be less than the rate of Rs. 200/-per RM. Drg : FD/E6/MAP/09
M&L for applying two coat of synthetic enamel paint (existing paint/silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of desk complete all as specified and directed by Engineer-in-Charge. Drg : FD-107
Form with back/Form without back S&F in replacement seat plank of form without back and form with back made out of 1st class hard wood including GI nuts, bolts and washers etc and melamine polishing complete all as specified and directed by Engr-in-Change Drg : FD-77(M)
S&F in replacement back plank of form with back made out of 1st class hard wood including GI nuts, bolts and washers etc and melamine polishing complete all as specified and directed by Engr-in-Change Drg : FD-77(M)
M & L for applying one coat of synthetic enamel paint including preparation of previously treated/old steel surface on frame of form with back complete all as specified and directed by Engineer -in- Charge. Drg : FD-77M)
STEEL FURNTIURE Almirah large steel S&F in replacement locking device of brass bright finish, six lever with keys in duplicate for each lock to almirah steel large complete all as specified and directed by Engineer- in- charge.Drg No. FD-67(M) FD-243(M) as applicable
S&F in replacement 3 way locking system made out of 10mm dia Mild steel Rod to almirah large steel complete all as specified and directed by Engineer- in- charge. Drg No. FD-67(M)
S&F in replacement handles steel chromium plated suitable for almirah Large steel complete all as specified and directed by Engineer- in- charge.Drg : FD-243(M) FD-67(M) and as applicable
S&F in replacement 'G' clamps suitable for re-fixing of shelves of almirah large steel with machine screws complete all as specified and directed by Engineer- in- charge.
S&F in replacement shelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with two coats of synthetic enamel paint (silver grey) over a coat of red oxide primer of almirah large Steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-67M
S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including two coats of synthetic enamel (silver grey) paint over two coats of red oxide primer to almirah large steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-67(M)
M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah large steel/almirah steel large MAP inside and outside complete all as specified and directed by Engineer-in-Charge. Drg : FD-67(M)
Almirah Med steel S&F in replacement locking device of brass bright finish, six lever with keys in duplicate for each lock to almirah steel Med complete all as specified and directed by Engineer- in- charge.Drg No. FD-67(M) FD-243(M) as applicable
S&F in replacement 3 way locking system made out of 10mm dia Mild steel Rod to almirah medium steel complete all as specified and directed by Engineer - in – Charge. Drg : FD-243(M),67 (M) as applicable
S&F in replacement handles steel chromium plated suitable for almirah medium/Large steel complete all as specified and directed by Engineer- in- charge.Drg : FD-243(M) FD-67(M) and as applicable
S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including two coats of synthetic enamel (silver grey) paint over two coats of red oxide primer to almirah medium steel complete all as specified and directed by Engineer- in- charge.Drg : FD-243(M)
S&F in replacement 'G' clamps suitable for re-fixing of shelves of Med steel with machine screws complete all as specified and directed by Engineer- in- charge.
S&F in replacement shelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with two coats of synthetic enamel paint (silver grey) over a coat of red oxide primer of almirah medium steel complete all as as specified and directed by Engineer-in-Charge. Drg : FD-243
M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah steel medium complete all as specified and directed by Engineer-in-Charge.Drg : FD-67(M)
Locker Bed side steel S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including two coats of synthetic enamel (silver grey) paint over two coats of red oxide primer to locker steel complete all as specified and directed by Engineer - in – Charge.Drg : FD-257
S&F in replacement shelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with two coats of synthetic enamel paint (silver grey) over a coat of red oxide primer of Locker complete all as as specified and directed by Engineer-in-Charge. Drg : FD-243, FD-257 (M)
S&F in replacement handles alluminium anodised 100mm long 'D' type of locker steel complete all as specified and directed by Engineer- in charge. Drg : FD-257 (M)
S&F in replacement hasp & staple aluminium anodised 75mm x 40mm x 3mm thick safety type of locker steel complete all as specified and directed by Engineer-in-Charge. Drg No. FD-257(M)
M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of locker steel complete all as specified and directed by Engineer-in-Charge.Drg : FD-257
Table office officer and clerk steel S&F in replacement locking device of brass bright finish, six lever with keys in duplicate for each lock to drawers/lockers to table office (Officer/Clerk) complete all as specified and directed by Engineer - in – Charge. Drg No. FD-84(M)
S&F in replacement drawer of table office (officer) steel made out of 1mm thick PBI sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg : FD-84(M)
S&F in replacement drawer of table office (clerk) made out of 1mm thick PBI sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg No. FD-84(M)
M&L for repairing such as welding, lapping, turning, riveting bolting etc to drawers of table office steel (Officer/ clerk) to make them in serviceable condition complete all as specified and directed by Engineer-in-Charge. Drg : FD-84(M)
M&L for running welding in repairs to the steel furniture having thickness 3mm and 25mm to 30 mm in length with gas welding including preparing the surfaces beveling etc as required complete all as specified and directed by Engineer-in-Charge Drg : FD-84(M)
M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table office (officer) steel/ table office clerk steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-84
Table 900 x 900 x 760mm M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table steel (900 x 900x 760mm) complete all as specified and directed by Engineer-in- Charge Drg : FD-1009
Table 900 x 600 x 760mm with & w/o drawer S&F in replacement Drawer of table size 900mmx600mm, made out of 1mm thick PBI sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer - in – Charge. Drg : FD-1008 & FD-1007
S&F in replacement Lock device of table size 900mmx600mm complete all as specified and directed by Engineer - in – Charge. Drg : FD-1008 & FD-1007
S&F in replacement members of frames of table size 900mmx600mm, made out of mild steel 25mm square tube 16 gauge wall thickness including cutting welding bending etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg : FD-1008 & FD-1007
M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table steel (900 x 600) with/with out drawer complete all as specified and directed by Engineer-in- Charge . Drg : FD-1007 & FD-1008
Book Shelf Open large/Book case steel M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of Book shelf open large steel and rack steel adjustable 6 tiers (305mm width) complete all as specified and directed by Engineer-in-Charge.Drg : FD-106 & FD-69 as applicable
Shoe Rack Steel M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification, welding of rack and denting etc. of steel surfaces of rack shoe steel complete all as specified and directed by Engineer-in- Charge.Drg : FD/E6/MAP/02
Rack 1830 x 760 x 1905mm M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of rack steel (1830 x 760mmx1905mm ) complete all as specified and directed by Engineer-in- Charge . Drg : FD-129(M)
Chair Verandah MAP M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of chair verandah MAP complete all as specified and directed by Engineer-in- Charge Drg : FD/E6/MA P/11
Chair CB with and without Arm S & F in replacement seat & back each of chair CB steel with arms, made out of Ist class Hard Wood . duly canned with 2mm half round plastic cane except border which shall be 3mm flat and seat shall be fixed to the frame with nut and bolts 3” long, 4mm dia threaded as per existing duly melamine polished in black colour complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)
S & F in replacement seat & back each of chair CB steel without arms, made out of Ist class Hard Wood . duly canned with 2mm half round plastic cane except border which shall be 3mm flat and seat shall be fixed to the frame with nut and bolts 3” long, 4mm dia threaded as per existing duly melamine polished in black colour complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)
S & F in replacement mild steel flat iron size 25mm x 3mm as in stiffener and welded to frame of chair CB steel with/without arms including two coats of red oxide primer complete all as specified and directed by Engineer - in - Charge. Drg : FD-75(M)
S & F in replacement arms of chair CB steel made to shape as per existing pattern of Ist class Hard Wood . duly black melamine polished and fixed to chair CB steel with arms with steel screws, 3mm dia complete all as specified and directed by Engineer - in – Charge. Drg : FD – 75 (M)
M & L for welding alround to broken MS steel frames of chair CB steel with arm & w/o arm and applying two coats of red oxide primer to the welding point complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M) &TP
M & L for applying two coats of synthetic enamel paint (silver grey) to steel frame of chair CB steel with arms including preparation of surfaces of steel frames complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)
M & L for applying two coats of synthetic enamel paint (silver grey) to steel frame of chair CB steel without arms including preparation of surfaces of steel frames complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)
BED HARD S&F in replacement Head board made out of 18 thick prelaminated particle board ISI marked alongwith PVC beading to sides and top of head board complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable
S&F in replacement Foot board made out of 18mm thick prelaminated particle board ISI marked alongwith PVC beading to sides and top of foot board complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable
S&F in replacement PVC Shoes for legs of bed hard map complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable
M&L as in replacement of gusset duly riveted with pipe and legs and leg as per existing design with two coats of synthetic enamel paint over a coats of red oxide primer all as specified and directed by Engineer-in-Charge Drg FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable
M&L for applying two coats of synthetic enamel paint (Olive black) with spray machine including preparation, rectification and denting etc. of steel surfaces of bed hard map complete all as specified and directed by Engineer-in- Charge. Drg : FD/MAP/11/01
Charpoy IP Hard Top M&L as in replacement of gusset duly riveted with pipe and legs and leg as per existing design with two coats of synthetic enamel paint over a coats of red oxide primer all as specified and directed by Engineer-in-Charge Drg : FD/MAP/11/01 as applicable
M&L for applying two coats of synthetic enamel paint (Olive black) with spray machine including preparation, rectification and denting etc. of steel surfaces of Charpoy IP hard Top complete all as specified and directed by Engineer-in- Charge. Drg : FD/MAP/11/01
Charpoy IP folding Hard Top M&L for welding to broken/craked joint of charpoy IP folding up to 32mm dia x3mm thick by gas welding as per exising design and making good with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer-in-Charge Drg FD-388(R)
M&L charpai IP folding hard top and as in replacement of gusset duly riveted with pipe and legs and leg as per existing design with two coats of synthetic enamel paint over a coats of red oxide primer all as specified and directed by Engineer-in-Charge Drg FD-388®
Chair Computer S&F in replacement Seat cushion 75mm thick, 32 density covered with approved quality tapestry cloth of chair computer complete all as specified and as directed by Engineer-in-Charge Drg : TP/FD/E6/MAP/01
S&F in replacement Back cushion 50mm thick 32 density covered with approved quality tapestry cloth of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01
S&F in replacement Pedestal assembly as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01
S&F in replacement Caster wheel as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01
S&F in replacement Hydraulic system as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg TP/FD/E6/MAP/01
S&F in replacement Arms/Handle as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01
Table Bed side MAP S&F in replacement Top of table bed side MAP made out of 18 mm thick prelaminated particle board along with 4mm thick TW beading alround complete all as specified and as directed by Engineer-in-Charge. Drg : FD/E6/MAP/15
S&F in replacement back Ply of table bed side MAP made out of 12mm thick plywood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15
S&F in replacement upper drawer/lower drawer as per drg of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15
S&F in replacement Side made out of 18mm thick pre-laminated particle board as per drg of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15
S&F in replacement mild steel Handle 100 mm long with 02 Nos screw as per existing design of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15
Teapoy Verandah MAP S&F in replacement of Top of teapay varandah MAP made out of 18 mm thick prelaminated particle board along with 4 mm thick teak wood beading alround and paint all over the teapoy as per FD complete all as specified and directed by Engineer-in-Charge. Drg : FD/E6/MAP/
S&F in replacement PVC shoe of teapay varandah MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/
Chair Dining JCO/ORs S&F in replacement seat of chair dining JCO/Ors made out of PVC sheet, 4mm thick and weight not less than 0.50 Kg of each seat all as specified and directed by Engineer- in- charge. Make : Ashoka/Amko Drg No. FD/MAP-II/05
S&F in replacement Front leg /Rear leg of chair wooden using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225, FD-285
S&F in replacement Front rail/back rail/side rail/Stiffener of chair wooden using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285
M & L for preparing of all exposed wooden or wood based surfaces of chair dining and applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO.DRG NO. FD-16,FD-56, FD-225,FD-285
Chair Verandah JCO/ORs S&F in replacement seat & back of chair verandah JCO/Ors made out of PVC sheet, 4mm thick and weight not less than 1.850 Kg of each seat and back grooves 90 x 10 mm, 10 Nos. on seat & back all as specified and directed by Engineer- in- charge. Make : Ashoka/Amko Drg No. FD/MAP-II/05
M&L for applying two coats of synthetic enamel paint (White) with spray machine including preparation, rectification and denting etc. of steel surfaces of Chair Verandah JCO/OR complete all as specified and directed by Engineer-in-Charge.Drg : FD-67(M) and as applicable
Chair Verandah Taking down un-serviceable plastic cane and re-canning/ re-weaving with 4mm wide flat plastic cane as shown on DRG NO.FD-19(M),FD-359, FD-256 for chair verandah complete all as specified and directed by Engineer – in - Charge. (Make of cane : Shah & shah / M/s Premier/ Indian Plastic superior quality)
M & L for 3mm thick gas welding to mild steel tubing 19/20mm dia broken leg / frame of chair verandah as shown on DRG NO.FD-19(M),FD-359, FD-256 complete all as specified and directed by Engineer – in - Charge.
M & L for preparation of old painted steel surfaces of chair verandah and applying two coats of synthetic enamel paint (As per existing colour) complete all as specified and directed by Engineer – in - Charge.DRG NO. FD-19(M),FD-359, FD-256
S & F in replacement PVC shoe of best quality complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-19(M),FD-359, FD-256
S&F in replacement 10 mm dia mild steel round bar of chair verandah as per existing design complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-19(M) FD-359,FD-256
Chair Writing Map S&F in replacement handle with two Nos of nuts and bolts as per existing design of chair writing MAP/Chairconference/ chair visitor complete all as specified and directed by Engineer – in - Charge.DRG NO. FD/E6/MAP/12&TP
S&F in replacement seat cushion 50 mm thick of 32 density with Tapestry Cloth cover of chair writing MAP/Chair conference/ chair visitor complete all as specified and directed by Engineer – in - Charge.DRG NO.FD/E6/MAP/12&TP. Note : Tapestry cloth should not be not less than the rate of Rs 275/- per mtr , Sample of cloth should be approved by BSO/GE
S&F in replacement back cushion of chair writing MAP/Chairconference/ chair visitor complete all as specified & directed by Engineer-in-Charge.DRG NO. FD-282&TP,FDE6/MAP
Charpoy GI pipe ply top Assembling / tightening of loose socket of charpoy frames with minor repairs complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220
S&F in replacement galvanized iron elbow (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220
S&F in replacement galvanized iron check nut 6mm thick (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220
S&F in replacement long rail made out of galvanized iron pipe 32mm bore medium grade ISI marked and fixing duly threaded / welded to galvanized iron pipe of charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220
S&F in replacement short rail made out of 32mm bore galvanized iron pipe long rail obtained from long rail and fixing duly threaded/welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220
S&F in replacement leg made out of 32mm bore galvanized iron pipe long rail obtained from short rail and fixing duly threaded/welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220
M & L for welding broken / cracked joints of charpoy galvanized iron pipe 32mm bore (i.e. short rail, long rail, leg etc.) upto 32mm dia x 3mm thick by gas welding as per existing design complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220
S&F in replacement 25 x 3mm flat iron clamp including joint Pati 02 Nos nut each within charpoy with washer made to shape as per existing design and welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220
School Chair with Hand Board S&F in replacement seat and back low plast of chairs school with hand board all as specified and shown on drawing and directed by Engineer-in-Charge. DRG NO. FD/E6/MAP/05
S&F in replacement hand board of chair school made out of 18 mm prelaminated partical board Top openable PVC edging screwed to 25 mm dia holow steel pipe inserted in 20 mmdia MS Rod welded to frame all as specified and shown on drawing and directed by Engineer-in-Charge. DRG NO. FD/E6/MAP/05
M&L for frame of school chair and welding broken/craked joints of chair school by Gas welding as per existing design complete all as specified and directed by Engineer-in-Charge.DRG NO. FD/E6/MAP/05
THAKURJI ENTERPRISES (BID ID -3485059)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
Tender_35.pdf
Tender Documents • 0.75 MB
BOQ_827275.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid