Jal Jivan Mission Electrification Work

Amount

Supply of following materials as per RESPO/PuVVNL norms at the work site.

STP Pole (SP-70) 13 mtrs long

STP Pole (SP-55) 11 mtrs long

PCC Pole 8.5 Mtrs Long

X-Arm M.S. Angle(65*65*6)mm V-Type 11KV

M.S.Channel (125*65*1300)mm T-Off

ACSR WEASAL Conductor

11KV Disc Insulator with fitting (Polymer)

Dropper Angle for 11KV line

11KV Pin Insulator with Pin (Polymer)

Stay Complet ( Stay rod 16*1800mm, Stay wire 5 kg, Stay clamp with bolt & nut)

Earthing Complete (M.S. Earthing Rod 16x1800 mm 6 SWG earthing wire)

M.S. Top Channel (100x50x2240 mm)

11KV 3Core 185sqmm XLPE Cable

11KV 3Core 185sqmm Outdoor Termination kit

11KV 3Core 185sqmm Outdoor Straight Through

11 KV VCB O/G Feeder CTR 200/100/5A 250 MVA

11 KV TPMO With all accessories

11 KV Fues Set (drop out) With Clamps

M.S. Cross Brasing Angle 50x50x6 mm, 4.5 kg/m

G.I. Wire 6SWG & 10SWG for gaurding and lacing

M.S. GAURDING ANGLE (65x65x6 mm, 1.6 m long) for gurding at single support with clamp

X-Arm holding clamp with nut & bolt

Danger Board with nut &bolt

F-Bracket with nut &bolt

Barbed wire

T-Off,Top,Dropper Clamp with nut&bolt

PG Clamp for DOG/weasel

G.I.Pipe 6"Dia

Various type nut &bolts

Stone Pad(300*300*75)mm

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of single support ST/PCC pole for construction of 11 KV line including digging of pit, fitting of all accessories, back filling of earth & others required work.

Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Earthing of Poles

Stringing & sagging of 3 phase 11 KV line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering.

Erection of Sectional Double Pole Structure of STP including fitting of all accessories & other required works.

Drill/cut of stone for erection of Pole/Stay in hilly area

Gaurding of 11 KV line as per RESPO norms

Installation of 11 KV Pilfer proof metering cubicle inside meter room, by fixing rag bolts after checking alignment with trench & conneting incomming & outgoing cable in the CT chamber

Mounting of CT/PT Unit on double pole with using 02 no. S/S Base (M.S. Angle).

11 KV 3x185 sq mm XLPE Cable Laying Digging of trench size 0.75x0.75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites & top by laying bricks finely cover the same by earth.

11 KV 3x185 sq mm XLPE Cable Laying of 11 KV XLPE Cable under G.I. Pipe 6 dia by catting pucca/bitamer road & road restoration

Construction of plinth, foundation & Installation of 11 KV VCB O/G feeder CTR 200/100/5A 250 MVA

Installation of 11 KV TPMO With Clamp

Installation of 11 KV Fuse Set With Clamp

Making of joint 11KV 3Core 185sqmm Outdoor Termination kit

Making of joint 11KV 3Core 185sqmm Outdoor Straight Through kit

Drilling of Railway Track by HDD Machine to cross the Railway Track, at Baipur (Tedhiten ) (100x2 mtr) & Phaphrakund (100x2 mtr)

M/S Grid Power Systems