SPECIAL REPAIR TO HANGER ROOF AT 3 BRD AF (PHASE-I) UNDER GE (AF) MC CHANDIGARH

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof coverings upto 25m height complete all as specified and directed.

Dismantling of fibre glass reinforced translucent corrugated sheeting upto 25m height complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for upto 25m height complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc (measured overall as fixed along the centre line over fittings and accessories upto 25m height) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring,clips and providing and fixing new ones beads upto 25m height complete all as specified and directed.

S&F galvanised, corrugated mild steel sheeting 0.80mm thick with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roofs, walls etc with grade of zinc coating 275 of any gauge / thickness upto 25m height etc complete all as specified and directed Make : TATA/JINDAL/SAIL/BHUSAN STEEL.

All as per item Ser No 7 but except sheets. Make : TATA/JINDAL/SAIL/BHUSAN STEEL.

S&F plain, galvanised mild steel sheeting 1.0mm thick in ridges, hips, valleys gutters, drip and straight flashings (length and girth as fixed) fixed with L-type or J-type or cranked hook bolts in roofs and walls etc. with grade of zinc coating 275 upto height 25m complete all as specified and directed. Make : TATA/JINDAL/SAIL/BHUSAN STEEL.

S&F plain, black mild steel sheeting 1.0mm thick in ridges, hips, valleys gutters, drip and straight flashings (length and girth as fixed) fixed with welding or L-type or J-type or cranked hook bolts in roofs and walls etc. upto height 25m complete all as specified and directed.

S&F fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roofs, walls etc. upto height 25m complete all as specified and directed.

S&F mild steel work as in joist, channel, angle, or tee sections, fixed independenly, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated including welding etc.conforming to Fe-410-W (gde-E-250) quality A upto 25m height complete all as specified and directed.

M&L for preparation to new galvanized corrugated/plain mild steel sheet of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (in camouflage pattern using number of colours) over a coat of red oxide primer upto height 25m complete all as specified and directed.

M&L for preparation to old galvanized corrugated/plain mild steel sheet of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (in camouflage pattern using number of colours) upto height 25m complete all as specified and directed.

M&L for preparation to new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer upto 25m height complete all as specified and directed.

S & F of 160mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls upto 25m height complete all as specified and as directed. Make:- Finolex/Supreme/Kisan/Tirupati/Prince

S & F of 160mm bore PVC (SWR) bends of any radius, complete all as specified and directed. Make:- Reliance/Prakash

S & F of stack clamps made out of 50mm x 5mm MS flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 160mm dia rain water pipes upto 25m height including two coats of synthetic enemel paint over one coat of red oxide complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of bricks work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation to new plastered surfaces and applying two coats of distemper oil emulsion over a coat of 2-3mm thick Birla putty including one coat of primer complete all as specified and directed.

S & F for rough cast, wired glass 6.4mm thick and glazing with putty/beads (any type as site required) in square exceeding 0.5 Sqm but not exceeding 0.75 Sqm in each pane upto 25m heightcomplete all as specified and directed.

Notes :- (a) These items wil be executed in hangar roof and walls and the height of the same is upto 25m from GL. Suitable arraangement shall be made by the contractor to work at the height upto 25m from GL. Please note nothing extra shall be payable on this account. (b) Rates of scaffolding, ladders, safety arrangement and any other arrangements as required will be deemed to be included against the rates quoted and nothig extra shall be admissible/paid on these grounds. (c) Necessary insurance of te workers deployed at site of work shall be borned by the contractor and the cost of the same shall be deemed to be included in the quoted rates. Please note nothing extra shall be paid to the contractor on this account. (d) Forderiving the area of the old unserviceable sheets for credit schedulethe number of sheets shall be multipied by the size of sheet. (e) The contractor will dismantle the strips (wherever required) for earthing lightening arrestors and others connected E/M items provided on the sheets very carefully. Removal and refixing of aluminium strip including insulators for earthing upto 1000 RM, Air termination rods upto 50 Nos will be deemed to be included in the quoted rate by the contractor. (f) Dismantling of the aluminium strips, lightening arrestors and other connected E/M items should be done very carefully so that the same can be refixed after replacing the damaged /missing sheets. In the process, if any aluminium strip, lightening arrestor air termination rod and other connected E/M items are damaged, then the same shall be replaced with new item at no extra cost, No claim, whatsoever, shall be entertained on this aspect. (g) Sufficient arrangements shall be made by the contractor to protect the existing floor during dismantling/fixing of sheets. Nothing extra shall be paid on these ground. Any damage made to floor during execution shall be made good by the contractor without any extra cost to Govt. (h) The rates quoted by the contractor against the concerned items will be deemed to be including the above factors and nothing extra shall be admissible on this account.

TARLOCHAN SINGH AND CO

M/s Bhagwati Enterprises

M/s BHUPINDRA ENGINEERING WORKS

Tejpal Singh and Co.

MD FOYZAL HOQUE

shree balaji builders