Construction of Operation Theatre in Trauma center at CHC Nalagarh Distt. Solan (HP) (SH- C/O Building portion and W. S. and S.I.)

Amount

Excacation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site, according to the HPPWD speciication of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machinery, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of the Engineer-In-Charge. Any loss to the public and private propreity during the course of execution and disposal of serviceable and unserviceable materials shall be the absoulute responsibility of the contractor and shall have to be duly compensated by im in all respects including all incidental charges

Excavation in earth work in all heights and depts in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and sedging out of rock (where blasting is prohibited) and their intermediate classification of soils including , dewatering wherever required, setting out ot required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site., according to the HPPWD specification of 1990 (one thousand nine hundred and ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor ) as per satisfation of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machinerie, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required) all useful material such as stones, shingles aggregate and slates shall be properly stacke at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of the Engineer-in-charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceble materials shall be the absolute responsiility of the contractor and shall have to be duly compensated by him in all respects including all incidental charge.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing form work with steel plates 3.15 (Three point One Five ) millmetress thick welded with angle iron in frame 30x30x5 (Thirty in to Thirty in to Five ) millmetress, so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work as per HP.PWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Suspended floors, roofs, landings, balconies and access platform

Stairs, (excluding landings) except spiral staircases

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Edges of slabs and breaks in floors and walls in any width

Weather shade, Chajjas, corbels etc., including edges

Providing and laying cement concrete 1:6:12 (One cement: Six sand: Twelve graded crushed hard stone aggregate 40 (Forty) millimeters nominal size] mechanically mixed, vibrated and curing complete, excluding cost of form work in foundation and plinth, as per H.P.PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges .

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing with 1:2:4 [ One cement: two sand: four graded crushed hard stone aggregate 40 (Forty) millmetress nominal size] including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing and laying damp-proof course 50mm ( Fifty millimeters) thick with cement concrete 1:2:4 [ One cement: two sand: four graded crushed hard stone aggregate 20 (Twenty) millmetress nominal size] including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing & applying a coat of residual petroleum bitumen of grade of VG- 10 ( Ten) of approved quality using 1.7 kg ( One point seventy kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all

Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts.

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing, hoisting and fixing l up to floor five level precast reinforced cement concrete in small lintels for all span upto floor all level including the cost of required centring shuttering but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing thermo mechanically treated bars of grade Fe 500 Dor more Steel reinforcement for R.C.C. work including straightening, cutting, bending including the cost of binding wire, placing in position and binding all complete upto plinth level, including carriage of materials in all leads lifts and all incidental charges.

Brick work with common burnt clay modular bricks of class designation 7.5 ( Seven point five) in foundation and plinth in:cement modular 1:6 )1 cement: 6 coarse sand) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in :Cement mortar 1:6 (one cement : fsix coarse sand) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Half brick masonry with common burnt clay F.P.S. (modular) bricks of class designation 12.5 ( Twelve point five) in superstructure above plinth level up to floor all level in Cement mortar 1:4 (one cement :four coarse sand) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Granite stone of any colour and shade tile work for wall lining upto any height with special adhesive over 12 mm (Twelve millimeter) thick bed of cement mortar1:3 (one cement : three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 18 mm ( Eighteen millimeters) thick, 150 mm ( One hundred fifty millimeters) wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( Twenty millimeters diameters) ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm ( Ten centimeters) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm ( Hundred millimeters into forty millimeters i nto forty millimeters) on both inner side of pelmet and rawl plugs 75 mm ( Seventy five millimeters) long etc. all complete including carriage of all equipments amd materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing and fixing fly proof galvanised MS wire gauge to Aluminium window and clerestory window using wire gauge with averag width of aperture 1.4 mm (one point four millimeters) in both directions with wire of dia 0.63 mm (Diameter Zero point sixty three millimeters) with aluminium snap beading (Cost of aluminium snap beading shall be paid in basic item) all complete including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing and fixing 25 mm ( twenty five millimeters) Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 125 mm ( One hundred twenty five millimeters) chromium plated brass handles with necessary screws etc. completeincluding carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

300 X 16 mm (three hundred in to sixteen millmetres)

250 X 16 mm (two hundred fifty in to sixteen millmetres)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

250 x10 mm. (two hundred fifty in to ten millmetres)

150x10 mm(one hundred fifty in to ten millmetres)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

125 mm (one hundred twenty five millmetres)

100 mm(one hundred millmetres)

Providing and fixing 50 mm ( Fifty millimeters) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 25mm ( twenty five millimeters) thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2 mm ( Two millimeters) thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

125x63x4 mm( One hundred twenty five into sixty three into four millimeters)

75x47x3.2 mm( Seventy five into forty seven into Three point sTwo millimeters)

Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg ( Thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeters to one thousand millimeters) ), with double speed adjustment with necessary accessories and screws etc.including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Steel work welded in built up sections/ hollow section and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, framed, guards, bars ladders and railing, brackets and similar works including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying chequered terrazo tiles medium shade pigment using 50% ( Fifty percent) white cement, 50% ( Fifty percent) ordinary cement 22 mm ( twenty two millimeters) thick with graded marble chips of size up to 6 mm in floors, Medium shade pigment using 50% ( Fifty percent) white cement, 50% ( Fifty percent) ordinary cement jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm (Twenty millimeter) thick bed of cement mortar 1:4 (one cement :four coarse sand) including rubbing and polishing complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.Medium shade pigment using 50% white cement 50% ordianary cement

25 mm (Twenty five millimeters) Kota stone slab flooring over 20 mm (Twenty millimeters) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.25mm thick

Kota stone slabs 20 mm (Twenty millimeter) thick in risers of steps, skirting, dado and pillars laid on 12 mm (Tweleve millimeter) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab including rubbing and polishing complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including rubbing and polishing flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimeter) thick stone slab over 20 mm (Twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm ( Three hundred by three hundred millmetres)(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (Three point three kilogram per square meters) including pointing the jointswith white cement and matching pigment etc.including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 1st quality ceramic white glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (Twelve millimeters) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( Three point three kilogram per square meters) including pointing in white cement mixed with pigment of matching shade complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying full body double changed vitrified floor tiles of size 600X600 milimetre (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( Three point three kilogram per square meters) including grouting the joints with white cement and matching pigments etc., complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying 300x600 mm ( Three hundred by six hundred millmetres) Glazed vitrified tiles (GVT) Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % ( Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in wall dado over 12 mm ( Twelve millimeters) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square meters) including grouting the joint with white cement & matching pigments etc. complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying 10 cm( Ten centimeters) thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm ( twenty five only)thick mud mortar mixed with bhusa @ 35 kg ( Thirty five kilogram) per cubic meter of earth and gobri leaping with mix 1:1 (one clay : one cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (one cement : three fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat with common burnt clay F.P.S.(non modular) brick tile of class designation 10 (Ten)including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Making khurras 45x45 cm ( forty five into forty five centimeters) with average minimum thickness of 5 cm ( five centimeter) cement concrete 1:2:4 (one cement : twocoarse sand : four graded stone aggregate of 20 mm (Twenty millimeter) over P.V.C. sheet 1 m x1 m x 400 micron( one meter in to one meter into four hundred micron) , finished with 12 mm (Twelve millimeter) thick bed of cement mortar1:3 (one cement : three coarse sand)and a coat of neat cement, rounding the edges and making and finishing the outlet complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing on wall face unplasticised Rigid 110 mm ( One hundred ten millimeters) diameter PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( Ten millimeters) gap for thermal expansion, (i) Single socketed pipes including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( Ten millimeters) gap for thermal expansion. Bend 87.5° ( Eighty seven degree ) , 110 mm ( One hundred ten millimeters) diameter bend including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing unplasticised 110 mm ( One hundred ten millimeters) diameter PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty by fifty by fifty millmetres) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

12 mm ( Twelve millimeters) cement plaster 1:4 (one cement: four fine sand) of mix on the fair side of single or half brick wall of mix including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

15 mm ( fifteen millimeters) cement plaster 1:6 (one cement: six fine sand) on the rough side of single or half brick wall of mix including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade over New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

6 mm ( Six millimeters) cement plaster 1:3 (one cement : three fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Finishing walls with Acrlic smooth exterior paint of required shade New work (Two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.2 Kg/10 sqm (Two point two kilogram per ten square meters) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upnstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) : including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

For fixed portion with poder coated aluminium(minimum thickness of powder coating 50 (Fifty) micron

Providing and fixing aluminimum work for dorrs, window, ventilators and partiitions with extruded built upstandard tubular section/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285 fixing for shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) power coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm ( Twelve millimeters)thick Pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.

Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 Kg/sqm)in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 ( Fifteen) ) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm ( two hundred millimeters) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. (Only weight of grill to be measured for payment)including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm Five centimeter to tewenty centimeters) , in recharge pit, in the required thickness, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Making plinth protection 50 mm ( Fifteen millimeters) thick of cement concrete 1:3:6 ( one Cement : three Sand : six Graded stone aggregate of Twenty millimeters) nominal size) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm( Fifteen in to twenty two centimeters) in cement mortar 1:6 (one Cement : six Sand)and insideplastring with cement plaster 1:3 (one Cement:three Sand) iincludingearth work andlaying 10 cm ( Ten centimeters) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm ( Forty millimeters)nominal size) and 7.5 cm ( Seven point five centimeters) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm ( Twenty millimeters) nominal size) and finished with a floating coat of neat cement complete as per standard design s directed by Engineer-in- Charge.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.

1216 ( one thousand two hundreded sixteen)16 mm ( Sixteen millimeters) OD pipe

2025 ( Two thousands twenty five) 25 mm ( Twenty five millimeters) OD pipe

Providing and fixing 25 mm ( Twenty five millimeters) G.I. pipes complete with G.I. fittings including trenching and refilling etc.for external workThis includes testing of joints complete as per direction of the Engineer- incharge. (25 mm dia nominal bore)Main line to building and sewer pipe to tank

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm ( Twenty millimeters to forty millimeters) nominal bore by providing and fixing tee iincludingcutting and threading the pipes complete including carriage of materials within all leads and lifts s directed by Engineer-in- Charge.( 25 to 40 mm nominal bore)

Fixing of water meter stop cock including fittings such as mild steel galvanized jam nut, sockets etc. cutting and making long secrews complete as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .

Constructing masonry Chamber 60x60x75 cm ( sixty into sixty into seventy five centimeter) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100mm ( One hundred millimeter) top diameter, 160 mm ( One hundred sixty millimeters) bottom diameter and 180 mm ( One hundred eighty millimeters) deep ( inside) with chained lid and RCC top slab 1:2:4 mix ( one cement: two sand: four graded stone aggregate 20mm ( twenty millimeter)(nominal size), i/c necessary excavation, foundation concrete 1:5:10 (one cement : five sand: ten graded stone aggregate 40 mm ( Forty millimeter) nominal size) and inside plastering with cement mortar 1:3 (One cement : three coarse sand) 12 mm (Twelve millimeters) thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .(with common burnt clay F.P.S (non modular) bricks of class designation 7.5)

Providing and fixing 1216 ( one thousand two hundreded sixteen)16 mm ( Sixteen millimeters) OD pipePolyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge (1216 (16mm OD) pipe

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges ..

Providing and fixing Sand cast iron S&S as per IS: 3989 trap 100 mm ( Hundred millimeters) inlet and 100 mm ( Hundred millimeters) outletof self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floorsincluding carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .(100 mm inlet and 100mm outlet) sand cast iron S & S as per IS : 3989)

Providing and fixing PVC waste and ventlating pipes including filling the joints with approved adhesive complete as per HP.PWD.specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .

75 mm (Seventy five millimeter)nominal bore

110 mm (One hundred ten millimeter)nominal bore

Providing and fixing PVC door Bends of required degree(any radius)ISI marked with oval access door insertion rubber washer 3 (three) millmetres thick, bolts and nuts complete supreme fittings and accessories complete as per direction of the Engineer-in-Charge and HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

75 mm (Seventy five millimeter)nominal bore

110 mm (One hundred ten millimeter)nominal bore

Providing and fixing PVC plain Bend supreme fittings and accessories complete as per direction of the Engineer-in-Charge and HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

75 mm (Seventy five millimeter)nominal bore

110 mm (One hundred ten millimeter)nominal bore

Providing and fixing PVC single equal branch with oval access door insertion rubber washer 3 (three) millmetress thick, bolts and nuts complete supreme fittings and accessories complete as per direction of the Engineer- in-Charge and HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

75 mm (Seventy five millimeter)nominal bore

110 mm (One hundred ten millimeter)nominal bore

Providing and fixing PVC plain double equal branch complete supreme fittings and accessories complete as per direction of the Engineer-in-Charge and HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

75 mm (Seventy five millimeter)nominal bore

110 mm (One hundred ten millimeter)nominal bore

Providing and fixing PVC collar complete supreme fittings and accessories complete as per direction of the Engineer-in-Charge and HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

75 mm (Seventy five millimeter)nominal bore

110 mm (One hundred ten millimeter)nominal bore

Providing and fixing PVC cowl I.S.I marked including cutting holes in walls and making good the same, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .

75 mm (Seventy five millimeter)nominal bore

110 mm (One hundred ten millimeter)nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 ( Ten) litre low level white P.V.C. flushing cistern, W.C. pan with ISI marked No. 20011white solid plastic seat and lidincluding flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .

Providing and fixing White Vitreous China Flat back wash basin size 550x 400 mm X830 mmwith pedestral in whicte shade with single with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .

Providing and fixing 32 mm diameter ( Thirty two millimeters) C.P. brass chain and rubber plug complete for sink or wash basin including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .

Providing and fixing 32 mm diameter ( Thirty two millimeters) G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .

Providing and fixing CP Brass 32 mm diameter ( Thirty two millimeters) size Bottle Trap of approved quality & make and as per the direction of Engineer- in-charge

Providing and fixing 100 mm ( One hundred millimeters) sand cast Iron grating for gully trap including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges

Providing and fixing 600 x 450mm (six hundred into four hundred fifty mm) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing PTMT towel rail 600 mm ( Six hundred millimeters) long towel rail with total length of 645 mm ( Six hundred forty five millimeters), width 78 mm (seventy eight millimeters) and effective height of 88 mm, weighing not less than 190 gms ( one hundred grams) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in- charge.

Providing and fixing 600x120x5 mm ( Six hundred into one hundred twenty into five millimeters) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( Forty millimeters) long screws, rawl plugs etc.,complete as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.(Providing and fixing toilet paper holder)

Providing and fixing C P brass toilet paper holder as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in- charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm ( One hundred thirty eight millimeters) , breadth 102mm ( one hundred two millimeters) , height of 75mm ( Seventy five millimeters) with concealed fitting arrangements, weighing not less than 106 gms( one hundred six grams)as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing 15 mm ( Fifteen millimeters) nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms( Eight hundred ten grams)as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in- charge. (15mm nominal bore)

Providing and fixing PTMT 15 mm ( Fifteen millimeters) nominal bore, 107 mm ( One hundred seven millimeters) long, weighing not less than 110 gms ( One hundred ten grams) pillar cock of approved quality and colour as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing PTMT angle stop cock 15 mm ( Fifteen millimeters) nominal bore, weighing not less than 85 gms as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing PTMT 15 mm ( Fifteen millimeters) nominal bore, 86 mm ( Eighty six millimeters) long, weighing not less than 88 gms ( Eighty eight grams) stop cock of approved quality and colour as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in- charge.

Providing and fixing uplasticised 15 mm ( Fifteen millimetrs) nominal bore 45 cm ( Forty five centimeters) length PVC connection pipe with brass unions as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.4(5 cm length , 15mm nominal bore)

Providing and fixing 20 mm ( Twenty millimeters) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in- charge.(20 mm nominal bore

ranjit singh

JAI PRAKASH RANOTE

mangla constructions

Suresh Kumar

gurbax singh contractor

shubham govt.contractor