Construction of Boys and Girlss Hostels, Type-III, Residential Quarters and Health Dispensary Facility at Morena (M.P.), under RLBCAU.

GRAND TOTAL ₹ 185,118,203.52

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

A 2.0 EARTH WORKS

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as

1 2.6 10 sqm on plan) including getting out and disposal

of excavated earth lead upto 50 m and for all lift, as

directed by Engineer-incharge.

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as

3 2.7 10 sqm on plan) including getting out and disposal 0.00 ₹ 0.00

of excavated earth lead upto 50 m and lift upto 1.5

m, as directed by Engineer-incharge.

i 2.7.3 Hard rock (blasting prohibited) Cum 1913.00 ₹ 1,432.95 ₹ 2,741,233.00

Extra for every additional lift of 1.5 m or part

4 2.26 thereof in excavation / banking excavated or 0.00 ₹ 0.00

stacked materials.

ii 2.26.2 Ordinary or hard rock Cum 2735.00 ₹ 227.40 ₹ 621,939.00

Excavating trenches by mechanical / manual means

of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides,

ramming of bottoms, for all depth, including getting

out the excavated soil, and then returning the soil

5 2.10 as required, in layers not exceeding 20 cm in depth, 0.00 ₹ 0.00

including consolidating each deposited layer by

ramming, watering, etc. and disposing of surplus

excavated soil as directed, within a lead of 50 m :

a) 2.10.1 All kinds of soil 0.00 ₹ 0.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Pipes, cables etc. exceeding 80 mm dia. But not

exceeding 300 mm dia

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

Carriage of Earth by mechanical transport including

loading, unloading and Stacking including royalty &

carriage up to 5 KM complete.

Carriage of Excavated rock by mechanical transport

including loading, unloading and Stacking including

royalty & carriage up to 5 KM complete.

Supplying and filling in plinth with sand under floors

10 2.27 including, watering, ramming consolidating and Cum 250.00 ₹ 2,123.75 ₹ 530,938.00

dressing complete.

Surface dressing of the ground including removing

vegetation and inequalities not exceeding 15 cm

11 2.28.1 deep and disposal of rubbish, lead up to 50 m and Sqm 2779.00 ₹ 34.15 ₹ 94,903.00

lift up to 1.5 m. All kinds of soil.

Supplying chemical emulsion in sealed containers

including delivery as specified

Chlorpyriphos/ Lindane emulsifiable concentrate of

Anti termite treatment 0.00 ₹ 0.00

Diluting and injecting chemical emulsion for POST-

14 2.35 CONSTRUCTIONAL anti-termite treatment 0.00 ₹ 0.00

(excluding the cost of chemical emulsion) :

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Treatment of soil under existing floors using

chemical emulsion @ one litre per hole, 300 mm

apart including drilling 12 mm diameter holes and

plugging with cement mortar 1 :2 (1 cement : 2

Coarse sand) to match the existing floor :

With Chlorpyriphos/Lindane E.C. 20% with 1%

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 7,133,571.00 ₹ 0.00

B 4.0 CONCRETE WORKS 0.00

Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived

from natural sources : 6 graded stone aggregate 20

mm nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived

from natural sources : 8 graded stone aggregate 40

mm nominal size derived from natural sources)

Centering and shuttering including strutting,

propping etc. and removal of form work for :

i 4.3.1 Foundations, footings, bases for columns Cum 332.00 ₹ 392.15 ₹ 130,194.00

Providing and laying damp-proof course 50mm

thick with cement concrete 1:2:4 (1 cement : 2

3 4.11 coarse sand (zone-III) derived from natural sources : Sqm 141.00 ₹ 495.75 ₹ 69,901.00

4 graded stone aggregate 20mm nominal size

derived from natural sources).

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Extra for providing and mixing water proofing

material in cement concrete work in doses by

weight of cement as per manufacturer's

Providing & applying a coat of residual petroleum

bitumen of grade of VG-10 of approved quality

using 1.7kg per square metre on damp proof course

after cleaning the surface with brushes and finally

with apiece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand (zone-III)

derived from natural sources : 6 graded stone

aggregate 20 mm nominal size derived from natural

6 4.17 sources) over 75mm thick bed of dry brick ballast Sqm 476.00 ₹ 749.30 ₹ 356,667.00

40 mm nominal size, well rammed and consolidated

and grouted with fine sand, including necessary

excavation, levelling & dressing & finishing the top

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 2,561,279.00 ₹ 0.00

C 5.0 REINFORCED CEMENT CONCRETE WORK 0.00

Centering and shuttering including strutting,

propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for

Walls (any thickness) including attached pilasters,

b 5.9.2 butteresses, plinth and string courses etc. Sqm 76.00 ₹ 842.50 ₹ 64,030.00

Suspended floors, roofs, landings, balconies and

access platform.

d 5.9.4 Shelves (Cast in situ) Sqm 133.00 ₹ 927.25 ₹ 123,324.00

Lintels, beams, plinth beams, girders, bressumers

and cantilevers

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Columns, Pillars, Piers, Abutments, Posts and Struts.

Stairs, (excluding landings) except spiral-staircases.

Small lintels not exceeding 1.5m clear span,

moulding as in cornices, window sills, string

courses, bands, copings, bed plates, anchor blocks

j 5.9.16 Edges of slabs and breaks in floors and walls 0.00 ₹ 0.00

Weather shade, Chajjas, corbels etc., including

Steel reinforcement for R.C.C. work including

3 5.22 straightening, cutting, bending, placing in position 0.00 ₹ 0.00

and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-

Steel reinforcement for R.C.C. work including

4 5.22A straightening, cutting, bending, placing in position 0.00 ₹ 0.00

and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and

fine aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland /Portland

Slag cement, admixtures in recommended

proportions as per IS: 9103 to accelerate / retard

setting of concrete, to improve durability and

workability without impairing strength; including

pumping of concrete to site of laying, curing,

5 5.33 carriage for all leads; but excluding the cost of 0.00 ₹ 0.00

centering, shuttering, finishing and reinforcement

as per direction of the engineer-in-charge; for the

following grades of concrete. Note: Extra cement

up to 10% of the minimum specified cement

content in design mix shall be payable separately. In

case the cement content in design mix is more than

110% of the specified minimum cement content,

the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement.

a) 5.33.1 All works upto plinth level 0.00 ₹ 0.00

Concrete of M25 grade with minimum cement

content of 330 kg /cum

Concrete of M30 grade with minimum cement

content of 350 kg /cum

b) 5.33.2 All works above plinth level upto floor V level 0.00 ₹ 0.00

Concrete of M25 grade with minimum cement

content of 330 kg /cum

Concrete of M30 grade with minimum cement

content of 350 kg /cum

Add for using extra cement in the items of design

6 5.35 mix over and above the specified cement content quintal 483.00 ₹ 733.50 ₹ 354,281.00

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V

level for each four floors or part thereof.

0.00 Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 72,004,874.76 ₹ 0.00

D 6.0 BRICK WORK 0.00

Brick work with common burnt clay F.P.S. (non

1 6.1 modular) bricks of class designation 7.5 in 0.00

foundation and plinth in:

i 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 12.00 ₹ 7,132.25 ₹ 85,587.00

Providing and laying autoclaved aerated cement

blocks masonry with 150mm/230mm/300 mm thick

AAC blocks in super structure above plinth level up

to floor V level with RCC band at sill level and lintel

level with approved block laying polymer modified

adhesive mortar all complete as per direction of

Engineer-in-Charge. (The payment of RCC

band and reinforcement shall be made for

Providing and laying autoclaved aerated cement

blocks masonry with 100 mm thick AAC blocks in

super structure above plinth level up to floor V level

in cement mortar 1:4 (1 cement : 4 coarse sand ).

The rate includes providing and placing in position 2

Nos 6 mm dia M.S. bars at every third course of

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 13,933,511.00 ₹ 0.00

E 8.0 MARBLE & GRANITE WORK 0.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing 18 mm thick gang saw cut,

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters,

window sills, facias and similar locations of required

size, approved shade, colour and texture laid over

20 mm thick base cement mortar 1:4 (1 cement : 4

coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all

a) 8.2.2 Granite stone slab colour black, Cherry/Ruby red 0.00

Providing edge moulding to 18 mm thick marble

stone counters, Vanities etc., including machine

2 8.3.2 polishing to edge to give high gloss finish etc. Rmt 219.00 ₹ 510.95 ₹ 111,898.00

complete as per design approved by Engineer-in-

Charge. Granite work

Extra for providing opening of required size & shape

for wash basins/ kitchen sink in kitchen platform,

vanity counters and similar location in

marble/Granite/Stone work including necessary

holes for pillar taps etc. including rubbing and

polishing of cut edge etc. complete.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing machine cut, mirror/ eggshell

polished, Granite stone work for wall lining (veneer

work) including dado, skirting, risers of steps etc., in

required design and pattern wherever required,

stones of different finished surface texture, on

12mm (average) thick cement mortar 1:3 (1 cement

Refer DSR- : 3 coarse sand) laid and jointed with white cement

5 2023 slurry @ 3.3 kg/sqm including pointing with white Sqm 36.00 ₹ 8,393.10 ₹ 302,152.00

(8.11.1) cement slurry admixed with pigment of matching

shade, including rubbing, curing, polishing etc. all

complete as per Architectural drawings, and as

directed by the Engineer-in-Charge. Granite of

colour black, cherry/ruby red 18-20mm thick (slab

area above 0.50 sqm)

Providing and fixing Ist quality ceramic glazed wall

tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-

6 8.31 Charge, in skirting, risers of steps and dados, over Sqm 1781.00 ₹ 1,267.95 ₹ 2,258,219.00

12 mm thick bed of cement mortar 1:3 (1 cement :

3 coarse sand) and jointing with grey cement slurry

@ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Designing, fabricating, testing, installing and fixing

in position Curtain Wall with Aluminium Composite

Panel Cladding, with open grooves for linear as well

as curvilinear portions of the building , for all

heights and all levels etc. including: (a) Structural

analysis & design and preparation of shop drawings

for pressure equalisation or rain screen principle as

required, proper drainage of water to make it

watertight including checking of all the structural

and functional design. (b) Providing, fabricating and

supplying and fixing panels of aluminium composite

panel cladding in pan shape in metalic colour of

9 8.32 approved shades made out of 4mm thick 0.00

aluminium composite panel material consisting of

3mm thick FR grade mineral core sandwiched

between two Aluminium sheets (each 0.5mm

thick). The aluminium composite panel cladding

sheet shall be coil coated, with Kynar 500 based

PVDF / Lumiflon based fluoropolymer resin coating

of approved colour and shade on face # 1 and

polymer (Service) coating on face # 2 as specified

using stainless steel screws, nuts, bolts, washers,

cleats, weather silicone sealant, backer rods etc.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

(c) The fastening brackets of Aluminium alloy 6005

T5 / MS with Hot Dip Galvanised with serrations

and serrated washers to arrest the wind load

movement, fasteners, SS 316 Pins and anchor bolts

of approved make in SS 316, Nylon separators to

prevent bi-metallic contacts all complete required

to perform as per specification and drawing The

item includes cost of all material & labour

component, the cost of all mock ups at site, cost of

all samples of the individual components for testing

in an approved laboratory, field tests on the

assembled working curtain wall with aluminium

i i composite panel cladding, cleaning and protection Sqm. 40.00 ₹ 5,015.05 ₹ 200,602.00

of the curtain wall with aluminium composite panel

cladding till the handing over of the building for

occupation. The Contractor shall provide curtain

wall with aluminium composite panel cladding,and

including base frame work for ACP having all the

performance characteristics all complete , as per

the Architectural drawings, as per item description,

as specified, as per the approved shop drawings

and as directed by the Engineer-in-Charge.

However, for the purpose of payment, only the

actual area on the external face of the curtain wall

with Aluminum Composite Panel Cladding

(including width of groove) shall be measured in

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 3,632,564.00 ₹ 0.00

F 9.0 WOOD & PVC WORK 0.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought

framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length ( hold

fast lugs or dash fastener shall be paid for

i 9.1.1 Second class teak wood Cum 3.00 ₹ 142,949.70 ₹ 428,849.00

Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type,

core of block board construction with frame of 1st

2 9.21 class hard wood and well matched commercial 3 0.00 ₹ 0.00

ply veneering with vertical grains or cross bands

and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel

butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood

battens 25 mm minimum depth on all edges of

flush door shutters (over all area of door shutter to

Providing and fixing wooden moulded beading to

door and window frames with iron screws, plugs

and priming coat on unexposed surface etc.

complete : 2nd class teak wood

Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or

5 9.48 round bars etc. including priming coat with 0.00 ₹ 0.00

approved steel primer all complete.

Fixed to openings /wooden frames with rawl plugs

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing curtain rods of 1.25 mm thick

chromium plated brass plate, with two chromium

6 9.46 plated brass brackets fixed with C.P. brass screws 0.00 ₹ 0.00

and wooden plugs, etc., wherever necessary

Providing 40x5 mm flat iron hold fast 40 cm long

including fixing to frame with 10 mm diameter

bolts, nuts and wooden plugs and embedding in

7 9.53 cement concrete block 30x10x15cm 1:3:6 mix (1 Each 990.00 ₹ 228.85 ₹ 226,562.00

cement : 3 coarse sand : 6 graded stone aggregate

20mm nominal size).

Providing and fixing aluminium tower bolts ISI

marked anodised (anodic coating not less than

9 9.97 grade AC 10 as per IS : 1868 ) transparent or dyed 0.00 ₹ 0.00

to required colour or shade with necessary screws

etc. complete :

Providing and fixing aluminium pull bolt lock, ISI

marked, anodised (anodic coating not less than

grade AC 10 as per IS : 1868) transparent or dyed to

required colour and shade, with necessary screws

bolts, nut and washers etc. complete.

Providing and fixing aluminium handles of approved

make anodized (anodic coating not less than grade

11 9.100 AC 10 as per IS : 1868) transparent or dyed to 0.00 ₹ 0.00

required colour or shade with necessry screws etc.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing & Fixing decorative high pressure

laminated sheet of plain / wood grain in gloss /

matt / suede finish with high density protective

surface layer and reverse side of adhesive bonding

quality conforming to IS : 2046 Type S, including

cost of adhesive of approved quality.

Providing and fixing factory made uPVC door frame

made of uPVC extruded sections having an overall

dimension as below (tolerance ±1mm), with wall

thickness 2.0 mm (± 0.2 mm), corners of the door

frame to be Jointed with galvanized brackets and

stainless steel screws, joints mitred and Plastic

15 9.117 welded. The hinge side vertical of the frames 0.00 ₹ 0.00

reinforced by galvanized M.S. tube of size 19 X 19

mm and 1mm (± 0.1 mm) wall thickness and 3 nos.

stainless steel hinges fixed to the frame complete

as per manufacturer’s specification and direction of

Engineerin-charge

i 9.117.2 Extruded section profile size 42x50 mm Rmt 490.00 ₹ 331.35 ₹ 162,362.00

16 9.118 Providing and fixing to existing door frames. 0.00 ₹ 0.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

30 mm thick factory made Polyvinyl Chloride (PVC)

door shutter made of styles and rails of a uPVC

hollow section of size 60x30 mm and wall thickness

2 mm (± 0.2 mm), with inbuilt decorative moulding

edging on one side. The styles and rails mitred and

joint at the corners by means of M.S. galvanised/

plastic brackets of size 75x220 mm having wall

thickness 1.0 mm and stainless steel screws. The

styles of the shutter reinforced by inserting

galvanised M.S. tube of size 25x20 mm and 1 mm (±

0.1 mm) wall thickness. The lock rail made up of 'H'

section, a uPVC hollow section of size 100x30 mm

i 9.118.2 and 2 mm (± 0.2 mm) wall thickness fixed to the Sqm 156.00 ₹ 3,253.80 ₹ 507,593.00

shutter styles by means of plastic/ galvanised M.S.

'U' cleats. The shutter frame filled with a uPVC

multi-chambered single panel of size not less than

620 mm, having over all thickness of 20 mm and 1

mm (± 0.1 mm) wall thickness . The panels filled

vertically and tie bar at two places by inserting

horizontally 6 mm galvanised M.S. rod and fastened

with nuts and washers, complete as per

manufacturer's specification and direction of

Engineer-in-charge.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing partition upto ceiling height

consisting of G.I. frame and required board,

including providing and fixing of frame work made

of special section power pressed/ roll form G.I.

sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel

50mm wide having equal flanges of 32 mm and

0.50 mm thick, fixed to the floor and ceiling at the

spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon

plugs and the studs 48 mm wide having one flange

17 9.105 of 34 mm and other flange 36 mm and 0.50 mm 0.00 ₹ 0.00

thick fixed vertically within flanges of floor and

ceiling channel and placed at a spacing of 610 mm

centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition

fixed flush to wall with suitable anchor fastener or

metal screws with nylon plugs at spacing of 450

mm centre to centre, and fixing of boards to both

side of frame work by 25 mm long dry wall screws

on studs, floor and ceiling channels at the spacing

of 300 mm centre to centre. The boards are to be

fixed to the frame work with joints staggered to

avoid through cracks,

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

M.S. fixing channel of 99 mm width (0.9 mm thick

having two flanges of 9.5 mm each) to be provided

at the horizontal joints of two boards, fixed to the

studs using metal to metal flat head screws,

including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, 0.00 ₹ 0.00

angle beads at corners (25 mm x 25 mm x 0.5 mm),

joint finisher and two coats of primer suitable for

board as per manufacture’s specification and

direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm

thick double skin fire rated Glass Reinforced

Gypsum (GRG) plaster board conforming to IS:

2095: part 3 (Board with BIS certification marks)

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing factory made uPVC glazed/

windows/ doors comprising of lead free uPVC

multichambered frame, sash and mullion/ coupler

(wherever required) extruded profiles having

minimum wall thickness of 1.70 mm for Series R1

and R2 profiles and 2.10 mm for Series R3 and R4

profiles conforming to EN: 12608 in any shape,

colour and design duly reinforced with galvanized

mild steel section made of required shape & size as

per CPWD Specification, uPVC extruded glazing

beads, interlocks and Inline sash adaptor

18 9.147.a (whereever required) of appropriate dimension, 0.00 ₹ 0.00

EPDM gasket, hardware, SS 304 grade fasteners of

minimum 8 mm dia. with countersunk head,

comprising of matching polyamide PA6 grade

sleeve for fixing frame to finished wall as per IS

1367 : Part 1 to 14, plastic packers, plastic caps and

necessary stainless steel screws etc. Profile of

frame, sash & mullion (if required) shall be mitred

cut and fusion welded/mechanically jointed duly

sealed at all corners, including drilling of holes for

fixing hardware and drainage of water etc. After

fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof

silicon sealant over backer rod of approved size and

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Wire mesh/ Glazing of plain/ toughened/

laminated/ double glass unit with/ without high

performance coatings as per design requirements

and conforming to IS: 3548 & IS: 16231 shall be

paid separately. Note:- Structural design proof

checked from a Government Engineering Institute, 0.00 ₹ 0.00

to be provided by the manufacturer for : (iii) Sites

with basic wind speed > 45 m/sec as per IS 875

–Part 3 (iv) Sites with structure height more than

20m for all wind speeds

Two and half track three panels sliding window with

two glazed & one wire mesh panels with Aluminium

channel for roller track, wool pile, nylon rollers with

Using R3 series with frame (85mm & above) x

(40mm & above) & glazed sash (30mm & above) x

(55mm & above) & fly screen sash (20mm & above)

i 9.147.A3.2 x (50mm & above) with zinc alloy (zamak) powder Sqm 24.00 ₹ 9,968.70 ₹ 239,249.00

coated handle on every glazed panel along with

multi-point locking system. (Height upto 1.8 meter).

Three track three panels sliding window with two

glazed & one wire mesh panels with Aluminium

channel for roller track, wool pile, nylon rollers with

Using R4 series with frame (115mm & above) x

(45mm & above) & both glazed and fly screen sash

i 9.147.A4.3 (44mm & above) x (55mm & above) with zinc alloy Sqm 436.00 ₹ 12,372.25 ₹ 5,394,301.00

(zamak) powder coated touch locks with hook.

(Height upto 1.8 meter).

Fixed window / ventilator without mullion /

Using R1 series with frame (33mm & above ) x

(35mm & above). (Height upto 0.90 metre)

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Casement door double panel with French (False)

Mullion with zinc alloy (zamak) 3D hinges, multi-

d) 9.147.F2 point locking system with cylinder, zinc alloy 0.00 ₹ 0.00

(zamak) powder coated handles on both sides.

Using R3 series with frame (55 mm & above) x

(50mm & above) & sash (55 mm & above) x (85mm

i 9.147.F2.1 & above) & French (False) mullion (55 mm & above) Sqm 217.00 ₹ 11,903.75 ₹ 2,583,114.00

x (60mm & above). (Height upto 2.5 meter).

Providing and fixing zinc alloyed (white powder

e 9.150 coated) touch lock for uPVC sliding window with each 201.00 ₹ 204.00 ₹ 41,004.00

necessary screws etc. complete.

Providing and fixing steel roller for uPVC sliding

window with necessary screws etc. complete.

Providing and fixing steel (white power coated)

g 9.153 crescent lock for uPVC sliding window/ door with each 112.00 ₹ 198.30 ₹ 22,210.00

necessary screws etc. complete.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing factory made single extruded

WPC (Wood Polymer Composite) solid door/

window/ Ceosetory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K

value 58-60 (Suspension Grade), calcium carbonate

and natural fibers (wood powder/ rice husk/ wheat

husk) and non toxic additives (maximum toxicity

index of 12 for 100 gms) fabricated with miter

joints after applying PVC solvent cement and

screwed with full body threaded star headed SS

19 26.86 screws having minimum frame density of 750 0.00 ₹ 0.00

kg/cum, screw withdrawal strength of 2200 N

(Face) & 1100 N (Edge), minimum compressive

strength of 58 N/mm2, modulus of elasticity 900

N/mm2 and resistance to spread of flame of Class A

category with property of being termite/ borer

proof, water/ moisture proof and fire retardant and

fixed in position with M.S hold fast/ lugs/ SS dash

fasteners of required dia and length complete as

per direction of Engineer-In- Charge.

(M.S hold fast/ lugs or SS dash fasteners shall be

paid for separately). Note: For WPC solid door/

window frames, minus 5mm tolerance in

dimensions i.e depth and width of profile shall be 0.00 ₹ 0.00

acceptable. Variationin profile dimensions on plus

side shall be acceptable but no extra payment on

this account shall be made.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing factory made single extruded

WPC (Wood Polymer Composite) solid decorative

type flush door shutter of required size comprising

of virgin polymer of K value 58-60 (Suspension

Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and

screw withdrawal strength of 1800 N (Face) & 900

N (Edge), minimum compressive strength 50

N/mm2, modulus of elasticity 850 N/mm2 and

20 26.88 resistance to spread of flame of Class A category 0.00 ₹ 0.00

with property of being termite/borer proof,

water/moisture proof and fire retardant. WPC to be

laminated with PVC foil of minimum 14 microns

thick of approved design pasted with hot melt

adhesive on both faces of shutter and fixing with

stainless steel butt hinges of required size with

necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In-

Charge. (Note: stainless steel butt hinges and

necessary S.S screws shall be paid separately)

Providing and fixing IS : 12817 marked stainless

21 9.70 steel butt hinges with stainless steel screws etc. 0.00 ₹ 0.00

SS Hardware 0.00 ₹ 0.00

Providing and fixing bright /matt finished Stainless

22 9.165 Steel handles of approved quality & make with 0.00 ₹ 0.00

necessary screws etc all complete.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing Stainless Steel tower bolts of

23 MR-1 approved make with necessary screws etc. 0.00

Providing and fixing Stainless Steel hanging floor

24 MR-2 door stopper of approved make with necessary 0.00 ₹ 0.00

screws etc. complete.

i i Single rubber stopper Each 391.00 ₹ 219.30 ₹ 85,746.00

Providing and fixing Concealed Door Closer With

Track Arm (SS Finish), Slide in SS Cover Stainless

Steel door closer, door weight upto 80 kg and door

width from 701 mm to 1000 mm), with double

speed adjustment with necessary accessories and

screws etc. complete.

Providing and fixing of Mortise Lock with Handles

Stainless Steel Finish (Solid Casted) with necessary

screws etc. complete as per design & approved by

Engineer in Charge.

Providing and fixing stainless steel sliding door

bolts, ISI marked anodised (anodic coating not less

than grade AC 10 as per IS : 1868), transparent or

dyed to required colour or shade, with nuts and

screws etc. complete : 300x16 mm

28 MR-6 Providing and fixing Stainless steel Al-drop Each 109.00 ₹ 363.80 ₹ 39,654.00

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 14,726,964.00 ₹ 1,785,385.00

G 10.0 STEEL WORK 0.00

Structural steel work riveted, bolted or welded in

built up sections, trusses and framed work,

1 10.2 including cutting, hoisting, fixing in position and Kg 330.00 ₹ 133.70 ₹ 44,121.00

applying a priming coat of approved steel primer all

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing 1mm thick M.S. sheet door

with frame of 40x40x6mm angle iron and 3 mm

2 10.5 M.S. gusset plates at the junctions and corners, all 0.00

necessary fittings complete, including applying a

priming coat of approved steel primer.

Using M.S. angels 40x40x6 mm for diagonal braces

Steel work in built up tubular ( round, square or

rectangular hollow tubes etc.) trusses etc., including

cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, including

welding and bolted with special shaped washers

i 10.16.2 Hot finished seamless type tubes Kg 525.00 ₹ 206.35 ₹ 108,334.00

Providing and fixing bolts including nuts and

washers complete

Providing and fixing circular/ Hexagonal cast iron or

M.S. sheet box for ceiling fan clamp, of internal dia

140 mm, 73 mm height, top lid of 1.5 mm thick

M.S. sheet with its top surface hacked for proper

bonding, top lid shall be screwed into the cast iron/

M.S. sheet box by means of 3.3 mm dia round

headed screws, one lock at the corners. Clamp shall

be made of 12 mm dia M.S. bar bent to shape as

per standard drawing.

Steel work welded in built up sections/ framed

work including cutting, hoisting, fixing in position

7 10.25 and applying a priming coat of approved steel 0.00 ₹ 0.00

primer using structural steel etc. as required

In stringers, treads, landings etc. of stair cases

i 10.25.1 including use of chequered plate wherever Kg 525.00 ₹ 123.60 ₹ 64,890.00

required, all complete.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

In gratings, frames, guard bar, ladder, railings,

brackets, gates and similar works.

Providing and fixing carbon steel galvanised (

minimum coating 5 micron) dash fastener of 10 mm

dia double threaded 6.8 grade (yield strength 480

N/mm2), counter sunk head, comprising of 10 m

dia polyamide PA 6 grade sleeve, including drilling

of hole in frame , concrete/ masonry, etc. as per

direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting

the same with necessary stainless steel nuts and

bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners ,

9 10.28 stainless steel bolts etc., of required size, on the top kg 10052.00 ₹ 772.40 ₹ 7,764,165.00

of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-charge,

(for payment purpose only weight of stainless steel

members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 8,911,433.00 ₹ 0.00

H 11.0 FLOORING WORK 0.00

Cement concrete flooring 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate) finished

1 11.3 with a floating coat of neat cement, including 0.00

cement slurry, but excluding the cost of nosing of

steps etc. complete.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

40 mm thick with 20 mm nominal size stone

Chequerred precast cement concrete tiles 22 mm

thick in footpath &courtyard, jointed with neat

cement slurry mixed with pigment to match the

shade of tiles, including rubbing and cleaning etc.

complete, on 20mm thick bed of cement mortar 1:4

(1 cement: 4 coarse sand).

i 11.20.1 Light shade pigment using white cement. Sqm 35.00 ₹ 1,402.00 ₹ 49,070.00

Kota stone slab flooring over 20 mm (average) thick

base laid over and jointed with grey cement slurry

mixed with pigment to match the shade of the slab

including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average)

thick cement mortar 1:3 (1 cement 3 coarse sand)

4 11.27 and jointed with grey cement slurry mixed with Sqm 9.00 ₹ 2,354.70 ₹ 21,192.00

pigment to match the shade of the slabs, including

rubbing and polishing complete.

Extra for pre finished nosing to treads of steps of

marble / granite stone.

Extra for marble / granite stone flooring in treads of

6 11.25 steps and risers using single length up to 2.00 metre. Sqm 320.00 ₹ 851.80 ₹ 272,576.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying Ceramic glazed floor tiles of

size 300x300 mm (thickness to be specified by the

manufacturer), of 1st quality conforming to IS :

15622, of approved make, in all colours, shades,

except White, Ivory, Grey, Fume Red Brown, laid on

20 mm thick bed of cement mortar 1:4 (1 Cement :

4 Coarse sand), jointing with grey cement slurry @

3.3 kg/ sq.m including pointing the joints with white

cement and matching pigments etc., complete.

Providing & Laying vitrified floor tiles in different

sizes ( thickness to be specified by the

manufacturer) with water absorption's less than

0.08% and confirming to IS : 15622 of approved

10 11.41 make in all colours and shades, laid on 20mm thick 0.00 ₹ 0.00

cement mortar 1:4 (1 cement : 4 coarse sand)

including grouting the joints with white cement and

matching pigments etc, complete.

Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer), with

water absorption less than 0.08 % and conforming

to I.S. 15622, of approved make, in all colours &

shade, in skirting, riser of steps, over 12 mm thick

bed of cement mortar 1:3 (1 cement: 3 coarse

sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joint with white cement

& matching pigments etc. complete.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying Polished Granite stone flooring

in required design and patterns, in linear as well as

curvilinear portions of the building all complete as

per the architectural drawings with 18 mm thick

stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid

and jointed with cement slurry and pointing with

white cement slurry admixed with pigment of

matching shade including rubbing, curing and

polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black,

Cherry/Ruby Red or equivalent

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 15,110,090.00 ₹ 0.00

I 12.0 ROOFING 0.00

Providing gola 75x75 mm in cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 stone aggregate 10

mm and down gauge), including finishing with

cement mortar 1:3 (1 cement : 3 fine sand) as per

standard design : In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1 cement

: 2 coarse sand : 4 graded stone aggregate of 20

mm nominal size) over P.V.C. sheet 1 m x1 m x 400

2 12.22 micron, finished with 12 mm cement plaster 1:3 (1 Each 36.00 ₹ 298.25 ₹ 10,737.00

cement : 3 coarse sand) and a coat of neat cement,

rounding the edges and making and finishing the

outlet complete.

Acostical False Ceiling 0.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and Fixing of 16mm Thick sky lights

consisting of Multi cell/tight cell Polycarbonate

Panel System of approved colour, 16 mm thick

(minimum) having uniform in color with an integral

Tight-Cell core constructed not to exceed

4mmx4mm in a cross section, Vertical Standing

Seam manufactured at both sides of the panel.

Snap-on connector to interlock the panels shall

have a grip-lock double tooth locking mechanism to

ensure maximum uplift capability and shall be of

same color as that of panel. Panel shall be factory

sealed/end welded panels with additional End-

9 MR-7 cap/Aluminium U-Profile (mill finish) for ends. Panel Sq.Mt. 40.00 ₹ 2,780.00 ₹ 111,200.00

shall be co-extruded with special anti glare

compound and UV protected. The full system shall

be fitted on MS purlins perpendicular to direction

of sheeting with purlin spacing as specified by

Manufacturer. The rate includes cost of all the

operations, labour and all materials and tests (as

applicable) involved such as bolts nuts and screws

etc. and labour for cutting bending to required

profile, necessary scaffolding, hoisting in position

etc. for proper completion of the work etc.

complete as per specification drawings and

direction of Engineer in charge. Finished surface

area of roofing fixed over steel tublar structure shall

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 3,164,849.00 ₹ 111,200.00

J 13.0 FINISHING WORK 0.00

1 13.4 12 mm cement plaster of mix : 0.00

15 mm cement plaster on rough side of single or

half brick wall of mix :

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

3 13.6 20 mm cement plaster of mix : 0.00

4 13.16 6 mm cement plaster of mix : 0.00 ₹ 0.00

Extra for providing and mixing water proofing per bag

material in cement plaster work in proportion of 50KG

5 13.21 recommended by the manufacturers. Cement 4023.00 ₹ 22.10 ₹ 88,908.00

Extra for plastering exterior walls of height more

6 13.22 than 10 m from ground level for every additional 0.00 ₹ 0.00

height of 3 m or part thereof.

Providing and applying plaster of paris putty of 2

7 13.26 mm thickness over plastered surface to prepare the Sqm 5654.00 ₹ 262.70 ₹ 1,485,306.00

surface even and smooth complete.

Distempering with 1st quality acrylic distemper,

having VOC (Volatile Organic Compound ) content

less than 50 grams/ litre, of approved brand and

manufacture, including applying additional coats

wherever required, to achieve even shade and

Applying one coat of water thinnable cement

9 13.85 primer of approved brand and manufacture on wall 0.00 ₹ 0.00

i 13.85.3 Water thinnable cement primer. Sqm 16657.00 ₹ 73.95 ₹ 1,231,785.00

Wall painting with acrylic emulsion paint of

10 13.82 approved brand and manufacture to give an even 0.00 ₹ 0.00

i 13.82.2 Two or more coats on new work Sqm 11003.00 ₹ 137.45 ₹ 1,512,362.00

Finishing walls with water proofing cement paint of

required shade :

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

New work (Two or more coats applied @ 3.84

Finishing walls with textured exterior paint of

required shade :

New work (Two or more coats applied @ 3.28

i 13.45.1 ltr/10 sqm) over and including priming coat of Sqm 2127.00 ₹ 223.60 ₹ 475,597.00

exterior primer applied @ 2.20kg/10 sqm

Finishing exterior walls with Ceramic textured

finish with protection coating by Ultratech Texture

Paints (UTTPL) ( Natural - Ceramic/ Stony of

approved shade or approved equivalent make) to

external wall surfaces comprising of water-borne,

penetrating, water repellent EM- primer & super

durable water based acrylic silicon resin clear and

super durable dirt and dust resistant protection

coat of FSI Clear coat, which shall be highly water

repellant, Anti-algae & anti-fungal in nature. The

coating shall also cover hairline cracks with

application method which includes 2 coats of E M

14 MR-8 Primer, 2 coats (Silmultaneouly) of 100% natural Sqm 6381.00 ₹ 2,831.00 ₹ 18,064,611.00

Ceramic & granite crushed stone , all in approved

colour and texture including preparation of surface,

appropriate primer coat etc. applied as per

manufacturer's instructions complete & project

consultant instructions, allow for scaffolding,

staging as required. The finish shall be natural

colour/ non pigmented, water repellant, resistant

to condensate formation, cover hairline cracks/

crazing, UV & alkali resistant & ensure good

breathability for the substrate all to complete as

per direction of Engineer-in-charge.

Finishing walls with Deluxe Multi surface paint

15 13.48 system for interiors and exteriors using Primer as 0.00 ₹ 0.00

per manufacturers specifications :

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Painting wood work with Deluxe Multi Surface Paint

of required shade. Two or more coat applied @0.90

i 13.48.2 ltr/10 sqm over an under coat of primer applied Sqm 567.00 ₹ 176.25 ₹ 99,934.00

@0.75 ltr/ 10 sqm of approved brand or

16 13.85 Applying priming coat : 0.00 ₹ 0.00

With ready mixed pink or Grey primer of approved

i 13.85.1 brand and manufacture on wood work (hard and Sqm 567.00 ₹ 70.35 ₹ 39,888.00

With ready mixed red oxide zinc chromate primer

17 13.50.3 of approved brand and manufacture on steel Sqm 50.00 ₹ 67.40 ₹ 3,370.00

galvanised iron/ steel works

Painting with synthetic enamel paint of approved

18 13.62 brand and manufacture to give an even shade : 0.00 ₹ 0.00

i 13.62.1 Two or more coats on new work Sqm 1162.00 ₹ 226.25 ₹ 262,903.00

Add for plaster drip course/ groove in plastered

surface or moulding to R.C.C. projections.

Providing and applying white cement based putty of

average thickness 1 mm, of approved brand and

21 13.80 manufacturer, over the plastered wall surface to Sqm 17559.00 ₹ 156.05 ₹ 2,740,082.00

prepare the surface even and smooth complete

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

(Providing and fixing Glass Reinforced Concrete

(G.R.C) Jali in approved size, pattern, design,

thickness and color. The Screens should be made

from ‘53 grade’White Portland Cement

manufactured by ‘JK Cement’ or equivalent, Quartz,

Fine Silica Sand, Alkali Resistant Glass Fiber

manufactured by ‘Saint Gobain’ or equivalent,

Super Plasticizers manufactured by ‘BASF’ or

equivalent, Polymers manufactured by ‘BASF’ or

equivalent and U.V resistant Synthetic inorganic

pigments should be used for pigmentation

manufactured by ‘BAYFERROX (Germany)’ or

equivalent. The material casting should take place

in Synthetic Rubber / FRP Mould manufactured by

‘Reckli’ or equivalent. The fixing of Jali should be

‘Dry fixing’ i.e. to be done with MS/SS ‘L’ shaped

Clamps, dash fasteners and pins etc as per site

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Supply and Installation of 6mm thick FR Grade

Aluminium Composite HPL Composite Panel

Cladding of approved color, made out of 5.5mm

thick FR grade mineral core sandwiched between

two aluminium sheets (each 0.25mm thick). The

Aluminium HPL Composite Panel Cladding shall be

coil coated with High Durable resin coating of

approved colour with 10 years exterior warranty

and shade on face #1 and polymer (service) coating

on face #2. Installation of panels will be done by

MBE Rivets (with Fixed and Sliding Points) with

recommended Aluminum T section of 75x37x2.8

21 MR-10 mm thick and L section 38x38x2.8mm thick held by Sqm 40.00 ₹ 7,558.15 ₹ 302,326.00

Aluminum Wall Bracket with Wind load and Dead

load slot, anchored by standard anchor fasteners

along with Thermal Separator. Installation of Panels

will be done using Rear Ventilated Principles only,

which is ensured by providing ventilation gap

minimum 200 cm2/ per Meter (for free flow of air

behind the façade) for the façade and using the

framework with no horizontal section. (for all levels

and all height cracks/ crazing, UV & alkali resista

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 19,495,540.00 ₹ 20,347,289.00

M 21.0 ALUMINIUM & STRUCTURAL GLAZING WORK 0.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded

built up standard tubular sections/appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS : 1285, fixed with rawl

plugs and screws or with fixing clips, or with

expansion hold fasteners including necessary filling

up of gaps at junctions, at top, bottom and sides

with required PVC/neoprene felt etc. Aluminium

sections shall be smooth, rust free, straight, mitred

and jointed echanically wherever required

including cleat angle, Aluminium snap beading for

glazing / paneling, C.P. brass / stainless steel

screws, all complete as per architectural drawings

and the directions of Engineer-in-charge. Glazing

and paneling to be paid for separately) :

a) 21.1.1 For fixed portion. 0.00

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever

required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing 12 mm thick prelaminated

particle board flat pressed three layer or graded

wood particle board conforming to IS: 12823 Grade

l Type ll, in panelling fixed in aluminum doors,

windows shutters and partition frames with C.P.

brass / stainless steel screws etc. complete as per

architectural drawings and directions of engineerin-

Pre-laminated particle board with decorative

lamination on both sides

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as

3 21.3 per the architectural drawings and the directions of 0.00 ₹ 0.00

engineer-in-charge . (Cost of aluminium snap

beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight

not less than 12.50 kg/sqm)

With float glass panes of 8 mm thickness (weight

not less than 20 kg/sqm)

Filling the gap in between aluminium frame and

adjacent RCC/Brickwork/ Stone Work by providing

4 21.8 weather silicon sealant over backer rod of approved 0.00 ₹ 0.00

quality as per architectural drawings and direction

of Engineer-in-charge

i 21.8.1 Upto 5mm depth and 5mm width metre 2226.00 ₹ 96.75 ₹ 215,366.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and supplying aluminium extruded

tubular and other aluminium sections as per the

architectural drawings and approved shop drawings

, the aluminium quality as per grade 6063 T5 or T6

as per BS 1474,including super durable powder

coating of 60-80 microns conforming to AAMA

2604 of required colour and shade as approved by

the Engineer-in-Charge. ( The item includes cost of

material such as cleats, sleeves, screws etc.

necessary for fabrication of extruded aluminium

frame work. Nothing extra shall be paid on this

account). The weight of aluminium extruded

section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing

and fixing in position semi (grid) unitized system of

structural/ curtain wall glazing (with open joints) for

linear as well as curvilinear portions of the building

for all heights and all levels, including :

a) Structural analysis & design and preparation of

shop drawings for the specified design loads

conforming to IS 875 part III (the system must

passed the proof test at 1.5 times design wind

pressure without any failure), including functional

design of the aluminum sections for fixing glazing

panels of various thicknesses, aluminium cleats,

sleeves and splice plates etc. gaskets, screws,

toggles, nuts, bolts, clamps etc., structural and

weather silicone sealants, flashings, fire stop

(barrier)-cum-smoke seals, microwave cured EPDM

gaskets for water tightness, pressure equalization &

drainage and protection against fire hazard

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

b) Fabricating and supplying serrated M.S. hot dip

galvanized / Aluminium alloy of 6005 T5 brackets of

required sizes, sections and profiles etc. to

accommodate 3 Dimensional movement for

achieving perfect verticality and fixing structural

glazing system rigidly to the RCC/

masonry/structural steel framework of building

structure using stainless steel anchor fasteners/

bolts, nylon separator to prevent bimetallic

contacts with nuts and washers etc. of stainless

steel grade 316, of the required capacity and in

required numbers..

c) Providing and filling, two part pump filled,

structural silicone sealant and one part weather

silicone sealant compatible with the structural

silicone sealant of required bite size in a clean and

controlled factory / work shop environment ,

including double sided spacer tape, setting blocks

and backer rod, all of approved grade, brand and

manufacture, as per the approved sealant design,

within and all around the perimeter for holding glass

d) Providing and fixing in position flashings of solid

aluminium sheet 1 mm thick and of sizes, shapes

and profiles, as required as per the site conditions,

to seal the gap between the building structure and

all its interfaces with curtain glazing to make it

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

e) Making provision for drainage of moisture/ water

that enters the curtain glazing system to make it

watertight, by incorporating principles of pressure

equalization, providing suitable gutter profiles at

bottom (if required), making necessary holes of

required sizes and of required numbers etc.

complete. This item includes cost of all inputs of

designing, labour for fabricating and installation of

aluminium grid, installation of glazed units, T&P,

scaffolding and other incidental charges including

wastages etc., enabling temporary structures and

services, cranes or cradles etc. as described above

and as specified. The item includes the cost of

getting all the structural and functional design

including shop drawings checked by a structural

designer, dully approved by Engineer-in-charge.

The item also includes the cost of all mock ups at

site, cost of all samples of the individual

components for testing in an approved laboratory,

field tests on the assembled working structural

glazing as specified, cleaning and protection till the

handing over of the building for occupation. In the

end, the Contractor shall provide a water tight

structural glazing having all the performance

characteristics etc. all complete as required, as per

the Architectural drawings, as per item description,

as specified, as per the approved shop drawings

and as directed by the Engineer in-Charge.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Note:- 1. The cost of providing extruded aluminium

frames, shadow boxes, extruded aluminium section

capping for fixing in the grooves of the curtain

glazing and vermin proof stainless steel wire mesh

shall be paid for separately under relevant items

under this subhead. However, for the purpose of 0.00 ₹ 0.00

payment, only the actual area of structural/ curtain

wall glazing (including width of grooves ) on the

external face shall be measured in sqm. up to two

decimal places.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing, assembling and supplying vision glass

panels (IGUs) comprising of hermetically-sealed 6-

12- 6 mm insulated glass (double glazed) vision

panel units of size and shape as required and

specified, comprising of an outer heat strengthened

(as approved) glass 6mm thick, of approved colour

and shade with reflective soft coating on surface #

2 of approved colour and shade, an inner heat

strengthened (as approved) clear float glass 6mm

thick, spacer tube 12mm wide, desiccants, including

primary seal and secondary seal (structural silicone

sealant) etc. all complete for the required

7 25.3 performances, as per the Architectural drawings, as 0.00 ₹ 0.00

per the approved shop drawings, as specified and

as directed by the Engineer-in-Charge. The IGUs

shall be assembled in the factory/ workshop of the

glass processor. (Payment for fixing of IGU Panels in

the curtain glazing is included in cost of item

No.1.8.16 above). For payment, only the actual area

of glass on face # 1 of the glass panels (excluding

the areas of the grooves and weather silicone

sealant) provided and fixed in position, shall be

measured in sqm. (To be fixed on extruded

aluminium sections. and cost of aluminium sections

to be paid in relevant item)

(i) Coloured tinted float glass 6mm thick Heat

Strengthened substrate with reflective soft coating

on face # 2, + 12mm Airgap + 6mm Heat

Strengthened clear Glass of approved make having

properties as visible Light transmittance (VLT) of 25

to 35 %, Light reflection internal 10 to 15%, light

reflection external 10 to 20 %, shading coefficient

(0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Extra for openable side / top hung vision glass

panels (IGUs/laminated glass) including providing

and supplying at site all accessories and hardware

for the openable panels as specified and of the

approved make such as heavy duty stainless steel

friction hinges, min 4 -point cremone locking sets

8 25.4 with stainless steel plates, handles, buffers etc. Sqm 10.00 ₹ 3,671.50 ₹ 36,715.00

including necessary stainless steel screws/

fasteners, nuts, bolts, washers etc. all complete as

per the Architectural drawings, as per the approved

shop drawings, as specified and as directed by the

Engineer in- Charge..

Providing and fixing 12 mm thick frameless

toughened glass door shutter of approved brand

and manufacture, including providing and fixing top

& bottom pivot & double acting hydraulic floor

9 21.18 spring type fixing arrangement and making Sqm 5.00 ₹ 5,325.90 ₹ 26,630.00

necessary holes etc. for fixing required door fittings,

all complete as per direction of Engineer-in-charge

(Door handle, lock and stopper etc.to be paid

Providing and fixing Pull Handle back to Back

Approved makes of Fixing 25mm dia x300mm c/c,

10 MR-11 SS Matt with necessary screws etc. complete as per Each 4.00 ₹ 2,616.05 ₹ 10,464.00

direction of Engineer-in-Charge.

Providing and fixing Corner Patch Lock With

Cylinder Approved makes, SS Matt with necessary

screws etc. complete as per direction of Engineer-in-

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing 12mm thk. Toughened float

glass glazing cut and fixed in openings of desired

shape as per drawing with 3/4" beveling all around,

fixed with the help of SS patch fittings, with top and

bottom 'C' channels, fixed firmly to the slab/ MS

Structure ,as directed by Engineer in Charge. Area

of openings to be measured). Assume frameless

glass. Rate of above item to include P/F of :

20x20mm "C" channel SS patch Fittings.

Aluminium Louver 0.00

Supply and installation of Exterior Aluminium

Vertical Louvers ARF200 Vertical Fin System, in

different sizes as per drawing. Louvers to be made

with Aluminium Box Tube sections and covered

with Solid Aluminium Sheet pre-coated on a

continuous reverse roller colour coating line with

high durable paint in approved colour. The top

coated surface shall be pre coated. Post painting by

way of powder coating or spray coating is not

allowed. Colour consistency with pre coating is

desired. Welding is not acceptable. Blades to be

mechanically secured to allow for replacement in

case of damage. Fasteners to be hex head. All the

fasteners should be mechanically fastened. Louvers

must be factory fabricated and finished so that only

assembly / installation will be done at the site.

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 2,908,239.00 ₹ 562,533.00

N 22.0 WATER PROOFING 0.00

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying water proofing treatment to

vertical and horizontal surfaces of depressed

portions of W.C., kitchen and the like consisting of :

(i) Ist course of applying cement slurry @ 4.4

Kg/Sqm mixed with water proofing compound

conforming to IS 2645 in recommended

proportions including rounding off junction of

vertical and horizontal surface. (ii) IInd course of

20mm cement plaster 1:3 (1 cement : 3 coarse

sand) mixed with water proofing compound in

recommended proportion including rounding off sqm 323.00 ₹ 769.60 ₹ 248,581.00

junction of vertical and horizontal surface. (iii) IIIrd

course of applying blown or residual bitumen

applied hot at 1.7 Kg. per Sqm of area. (iv) IVth

course of 400 micron thick PVC sheet. (Overlaps at

joints of PVC sheet should be 100 mm wide and

pasted to each other with bitumen @ 1.7 Kg/Sqm.)

Supplying and Stacking Filling sunken floor with

over burnt jhama brick aggregate 120mm to 40mm

2 16.3.4 including compacting of materials complete as Cum 113.00 ₹ 798.10 ₹ 90,185.00

specified and directed for all levels.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying integral cement based water

proofing treatment including preparation of surface

as required for treatment of roofs, balconies,

terraces etc consisting of following operations: (a)

Applying a slurry coat of neat cement using 2.75

kg/sqm of cement admixed with water proofing

compound conforming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab including

adjoining walls upto 300 mm height including

cleaning the surface before treatment. (b) Laying

brick bats with mortar using broken bricks/brick

3 22.7 bats 25 mm to 115 mm size with 50% of cement 0.00 ₹ 0.00

mortar 1:5 (1 cement : 5 coarse sand) admixed with

water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge over 20 mm

thick layer of cement mortar of mix 1:5 (1 cement

:5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by

Engineer-in-charge to required slope and treating

similarly the adjoining walls upto 300 mm height

including rounding of junctions of walls and slabs.

Digitally signed by ARTI

HOSTELS, DISPENSARY, TYPE 3 COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

(c) After two days of proper curing applying a

second coat of cement slurry using 2.75 kg/ sqm of

cement admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin-

charge. (d) Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1 cement :4

coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by

Engineerin- charge including laying glass fibre cloth

of approved quality in top layer of plaster and 0.00 ₹ 0.00

finally finishing the surface with trowel with neat

cement slurry and making pattern of 300x300 mm

square 3 mm deep. (e) The whole terrace so

finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All

above operations to be done in order and as

directed and specified by the Engineer-in-Charge :

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

TOTAL (Carried Over to Summary of Civil Works) ₹ 3,232,909.00 ₹ 0.00

Total of DSR & NDSR ₹ 189,622,230.76

Digitally signed by ARTI

COLLEGE OF HORTICULTURE MORENA, MADHYA PRADESH.

Name of Project: “Construction of Boy’s and Girl’s Hostels, Type-III Residential Quarters, and Health Dispensary

Facility at Morena (M.P.), under RLBCAU Jhansi.”

ELECTRICAL WORKS (AS PER DSR 2025)

S.NO NAME OF SUB-HEAD

DSR 2025 items Non Scheduled items

1 SUBHEAD- I: DISTRIBUTION BOARD ₹ 968,712.00 ₹ 0.00

2 SUB-HEAD - II : INTERNAL WIRING ₹ 10,380,018.00 ₹ 0.00

3 SUB-HEAD III - FANS & LIGHT FIXTURES: ₹ 1,613,444.00 ₹ 232,583.90

4 SUB HEAD - IV : LIGHTNING PROTECTION SYSTEM ₹ 490,458.00 ₹ 0.00

6 SUB HEAD -VI : RACEWAY AND CABLE TRAY ₹ 671,450.00 ₹ 0.00

8 SUB HEAD-VIII : Panels and Earthing ₹ 1,007,691.00 ₹ 1,192,207.45

Digitally signed by ARTI

COLLEGE OF HORTICULTURE MORENA, MADHYA PRADESH.

Name of Project: “Construction of Boy’s and Girl’s Hostels, Type-III Residential Quarters, and Health Dispensary Facility at Morena (M.P.), under RLBCAU Jhansi.”

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING

ELECTRICAL WORKS (AS PER DSR 2025)

AS PER MARKET RATE

S.NO DSR 2025 ITEMS DESCRIPTION OF ITEM UNIT

DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

1 SUBHEAD- I: DISTRIBUTION BOARD

Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,

MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/ Isolator)

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing

4 2.12 MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature

circuit breaker suitable for inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing following rating, double pole, single phase and neutral, 240 volts,

residual current circuit breaker ( RCCB), having a sensitivity current upto 30

milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc as required.

Supplying and fixing following rating, four pole, three phase and neutral, 415 volts,

residual current circuit breaker ( RCCB), having a sensitivity current upto 30

milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc as required.

Total carried over to Summary 968,712.00 0.00

2 SUB-HEAD - II : INTERNAL WIRING

Digitally signed by ARTI

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor

single core cable in surface / recessed steel conduit, with modular switch, modular plate,

1.30 suitable GI box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell

point (without independent

2 1.54 switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in

surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc. as required

3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel

conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on

surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet

and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in

residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on

surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular

socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole

and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet

6 2.18 steel enclosure, on surface or in recess, with chained metal cover for the socket out let Each 105.00 1,806.00 189,630.00

and complete with connections, testing and commissioning etc. as required.

9 Supplying and fixing of call bell / buzzer suitable for single phase,230 volt complete as

Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole

and earth, metal enclosed plug top along with 30 amps "C" curve, TP, MCB, in sheet

2.20 steel enclosure, on surface or in recess, with chained metal cover for the socket out let Each 3.00 4,358.00 13,074.00

and complete with connections, testing and commissioning etc. as required.

3 SUB-HEAD III - FANS & LIGHT FIXTURES:

Digitally signed by ARTI

DSR2025-8.2 LED Down lighter (SMD Type) (System lumen efficacy ≥120 <135 lm/Watt )

Supplying, installation, Testing & Commissioning of LED Recessed /

surface Down lighter (Round / square/ Rectangular) SMD type of following

body material with PMMA and prismatic diffuser and construction as per IS :

10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range

-15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with

Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 ,

UGR (Unified Glare Rating) < 19, Flicker free (flicker should

be below 5 %), life time (LED,Driver & electrical circuitry), life time of

minimum 50000 Burning Hours with , 70% of initial Lumen maintained

till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per

ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum

power consumption should not more than the specified rating and Fixture

shall be of relevant BIS standard and trade mark certificate ( T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on

housing. OEM must have its own in house NABL lab setup for all

testing facilities for LED fixtures. "complete in all respect i/c

connections with 1.5 sq mm FRLS, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80

Test report from NABL lab for all testing required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as approved by

Engineer-in-Charge as per requirement. (Thermal management: heat sink

of aluminum housing such that LED junction temperature shall not rise

Powder coated die cast /Extruded aluminum Body including trim .

Supply Installation, testing & commissioning of Integral LED 2ft batten. The batten shall

have housing made of CRCA Only & the front diffuser shall be made of

polycarbonate/polystyrene (Diffuser-Non yellowing type). The LED used shall have life

of 50000Hrs @ L70B50, CCT of 6500°K, SDCM≤5 & CRI≥80. The LEDs used should

be from Philips/Signify/APT Electronics/Osram/Nichia/Cree/Lumileds/Bridgelux.

Luminaire shall be designed to deliver minimum system lumen output of 2000lm at a

system efficacy of at-least 125 lumen/watt. Power consumption should not be more than

16W (±2W). The electronic driver used shall have a power factor ≥0.95 (@full load) and

THD ≤10% (@full load), suitable for an operating voltage range of 140-270V AC,

Current Ripple ≤5% (@full load), Internal surge protection should be minimum 4KV,

high-low voltage cut-off, electrical insulation class should be Class I & driver should be

4 NDSR-1.1 of Class B serviceability. The luminaire should be at least IP20 & IK02 rated. The Each 1.00 1,866.45 1,866.45

minimum dimensions (±5mm) of the batten shall be 44mm X 51mm X 585MM. The

luminaire brand name shall be embossed/engraved on the

luminaire/accessory/Endplate/Rim/Frame/end caps & not put using sticker/screen

printing. The luminaire driver shall be of the same make/manufacturer as that of LED

luminaires. Luminaire manufacturer must have In-house NABL accredited lab to

conduct LM79 as per 2019 standard, Type test as per IS10322, "FAT" before dispatch as

per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer before supply of material. The LED Luminaire &

it's driver both should be BIS registered. Successful bidder shall submit the following

reports before supply of material for approvals LM79 as per 2019 standard issued by

NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for

Digitally signed by ARTI

Supply, Installation, testing & commissioning of LED Bulkhead Luminaries, made of

high-pressure die-cast Aluminium body with polycarbonate diffuser. Luminaries should

be with minimum system efficacy of 110Lumen/Watt and minimum system lumen

output of 1100lm.LED used shall have life of 50000Hrs @ L70B50, CCT of 6500°K,

SDCM≤5 & CRI≥80. The luminaire driver shall comply to following parameters at 220V

to 240V: PF≥0.90 (@full load), THD ≤ 10% (@full load) & in-built surge protection of

2.5KV. The input voltage range shall be 140V to 270V. The fixture should comply with

the parameters as per IS10322. The luminaire shall have class C serviceability. The

luminaire shall be IP66 & IK09 compliant. The luminaire brand name shall be

embossed/engraved on the luminaire/accessory/Endplate & not screen printed or put

NDSR-1.2 using sticker. Luminaire manufacturer must have In-house NABL accredited lab to Each 12.00 1,386.63 16,639.55

conduct LM79 as per 2019 Standard, Type test as per IS10322, "FAT" before dispatch as

per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation

certificate for Luminaire manufacturer before supply of material. The LED Luminaire &

it's driver both should be BIS registered. Successful bidder shall submit the following

reports before supply of material for approvals LM79 as per 2019 standard issued by

NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for

luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire &

Driver. Similar to above Specs in Signify (Philips/Ecolink), Endo/Trilux.

9.2 Brush Less Direct Current (BLDC) Motor

Supply, Installation, Testing and Commissioning of ceiling fan with Brush

Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal

( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit,

safety rope, copper winding, steel/Al body Power Factor not less than 0.9,

Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS :

374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for

operation with regulator for speed control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise=75 degree C

(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50

Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply,

earthing etc. complete as req

8 Brush Less Direct Current (BLDC) Motor, 1200mm, service value ≥ 6.0 CM/Min/Watt,

air delivery 210 CM/Min

8.10 LED Batten light (System lumen efficacy ≥120 <135

Supplying, installation, Testing & Commissioning of

LED surface mounted Batten light of following body

material and construction as per IS : 10322 with

driver (Replaceable) as per the requirement with

Driver efficiency >85%, Operating voltage AC 140-

270 Volt, frequency 50/60 hz, Operating temp range

-5 0C to 40 0C, internal surge protection of 2.5 KV

with Short & Open circuit protection ,THD < 10% , P.

F.≥0.95, IP20, CRI >80, Flicker free (flicker should

be below 5 %), life time (LED,Driver & electrical

circuitry), of minimum 50000 Burning Hours

with 70% of initial Lumen maintained till life

(As per ANSI Bin), SDCM(Standard Deviation

Colour Matching) <3, Maximum power consumption

should not more than the specified rating and

Digitally signed by ARTI

Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. complete

in all respect i/c external connections with 1.5

sq.mm FRLS/HFFR, PVC insulated copper

conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty.

System lumen efficacy ≥120 <135 lm/Watt output .

LM79 & LM80 Test report and all testing required

for LED fixtures as per BIS shall be submitted.

Shape size and CCT shall be as approved by

Engineer-in-Charge as per requirement. (Thermal

management: heat sink of aluminium housing

such that LED junction temperature shall not rise

Powder coated die cast /Extruded aluminium

Body (Thickness > 1.20 mm)

9 DSR-8.10.1 LED Batten light (System lumen efficacy ≥120 <135 lm/Watt), 18-22 W Each 341.00 734 250294

10 Supply installation testing and comissioning LED Tube, Wall / Surface / Celling

Mounted, 10W(MIRROR LIGHT), luminous flux of luminaire 900lm, IP 20,1200mm,

NDSR-1.3 Direct light emission, 230V, Electronic Control Gear, 5700K, Satin Diffuser, L=600mm Each 62.00 1302.99 80,785.44

11 DSR2025-8.7 LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt)

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of

following body material and construction as per IS : 10322 with driver as per

the requirement with Driver efficiency >85%, Operating voltage AC 140-

270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short & Open circuit

protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare

Rating) < 19, Flicker free, (flicker should be below 5 %), life time

(LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with ,

70% of initial Lumen maintained till life ends,CCT 3000°K / 4000°K

/ 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard

Deviation Color Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of relevant BIS standard

and trade mark certificate ( T.C.). Manufactures Word Mark/ Name

Engraved/ Embossing/ Screen printing on housing. complete in all respect

i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80

Test report from NABL lab for all testing required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as approved by

Engineer-in-Charge as per requirement. (Thermal management: heat sink

of aluminium housing such that LED junction temperature shall not rise

Powder coated die cast / Extruded aluminium Body (Thickness

DSR-8.7.4 LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt), 36 Watt Each 16.00 2962 47392

12 NDSR-1.4 SITC Fresh air exhaust fan with louvers 300 mm sweep Each 32.00 2,201.00 70,431.95

13 NDSR-1.5 SITC of wall fan Each 4.00 2,509.14 10,036.55

13 Supplying of MS Body Exhaust Fan heavy duty 230V A.C 50 cycles, 600 mm sweep, 4

900 rpm, energy efficient, complete erected in position with 16A 3 Pin Plug Top in the

existing opening, including making good the damage, connection, testing,

commissioning etc. as required. - Crompton Make

Digitally signed by ARTI

LIGHT FIXTURES: to summary sheet 1,613,444.00 232,583.90

SUB HEAD - IV : LIGHTNING PROTECTION SYSTEM

1 Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long,

6.1 copper tube, having single prong at top, with 85mm dia 6 mm thick copper base plate Each 29.00 609.00 17,661.00

including holes etc. complete as required.

6.3 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other Each 285.00 139.00 39,615.00

metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

3 Providing and fixing GI tape 20mm x 3mm thick on parapet or surface of wall for

lightning conductor as required. (for horizontal run).

4 Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for

lightning conductor as required. (For vertical run.)

6.10 Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long Each 29.00 140.00 4,060.00

with 4 Nos. of G.I. bolts, nuts, check nuts and spring washers etc. complete as required.

6 Providing and laying G.I. tape, 32mm x 6mm thick, from earth electrode directly in

ground as required.

7 Earthing with G.I. earth pipe 4.5 metre long, 40mm dia including accessories, and

5.2 providing masonry enclosure with cover plate having locking arrangement etc. with set 29.00 7,658.00 222,082.00

charcoal or coke and salt complete as required.

Total of Sub-Head - IV 490458 0.00

SUB HEAD - V: UPS

26.2 Online UPS- Input supply: Three Phase, Output supply: Three Phase

Supplying, installation, Testing & Commissioning of of following capacity at

full load (Unity Power Factor) at operating temperature 0 to 40 deg C,

Relative humidity 0 to 95%, Online double conversion true sine wave

Uninterrupted hot swappable (allow for the replacement or addition of

battery modules without shutting down the entire system) modular Power

Supply (UPS) system with N+1 modules (N denotes total number of moduels

requird for rated capacity). The UPS shall include a Rectifier, inverter,

battery bank suitable for 30 minutes back up (Battery VAH capacity shall not

be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full

load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass

switch alongwith provision for manual bypass, suitable isolation transformer

for additional protection against neutral faults etc. UPS shall have inbuilt

phase sequence correction. The UPS systems offered are to be of the latest

technology with Digital Control Microprocessor based for reliable operation

using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier &

inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design,

manufacturing and inspection process should confirm to the relevant International

standards such as IEC/EN/VDE. The operating efficiency of the

UPS systems shall be >96% while operating on battery mode and delivering

quality power to the 100% non-linear loads. Current total harmonic

Digitally signed by ARTI

effect(ITHD) on the input grid shall be < 5% at 50 %load. (The required LC (

inductor (L) and a capacitor (C)) filters shall be included in UPS cost),

extreme power factor kit to be included to limit the input power factor (PF) to

0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be

kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7

leading power factor loads. UPS shall be suitable for incoming supply AC :

3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt,

50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output.

Non condensing, noise level less than 60db at 1 meter distance, protections:

Input Under voltage over voltage, abnormal out voltage, battery over

charging, output over current, short circuit protection, battery deep

discharge protection, 10KV surge. UPS must comply with low voltage

electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part

I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type

UPS. Communication RS232/RS485/SNMP port open protocol for BMS

integration, all hardware & software for iOT Communication as per approved

by Engineering in charge. Required battery racks and interconnecting

copper conductor cables of suitable size and connectors and all required

accoseries are inclusive of the cost). This system must provide a means for

logging and alarming of all monitored points plus email notification. Forced

air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS

should be able to handle at least 80% of the load, Noise Level 65 DB at 1

meter distance. The system shall be in compliance IEC 62040- 1,2 & 3, IS:

16242 and CPWD Specification. Display Panel (minimum) (In-build 5 inch or

more LC Display / LED ) to display : a) Input: Voltage, current, Frequency. b)

Bypass: Voltage, Frequency. c) Output: Voltage, frequency, Current.

d) Battery: Voltage, Capacity. e) Load: KVA, KW, Percentage.

f)Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On

LCD/LED): UPS should capture and display up to 3000 events like: Over

temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit /

Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical Data:

No. of power failures / Transfers to Bypass / Total Running time, etc. i) Mains

Mode of Operation /Battery Mode of Operation / Bypass feeding the load /

UPS Fault /Battery charging and discharging, overload, battery voltage and

battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm, UPS

Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over, Under

Voltage, Battery Over, Under Voltage, Over Load and short circuit, Over

Temperature. The UPS should have QR code which should contain

drawing, test report OEM manual,Geo- Tag of manufacturing location etc.

26.2.1 10KVA (Each Power module shall be < 10 KVA) Set 2 208,893.00 417,786.00

Total of Sub-Head - V 417,786.00 0.00

SUB HEAD -VI : RACEWAY AND CABLE TRAY

3.0 Cable Tray

3.1 4.1 Supplying and installing following size of perforated pre-painted M.S cable trays

with perforation not more than 17.5%, inconvenient sections, joined with

connectors, suspended from the ceiling with M.S. suspenders including

bolts&nuts, painting suspenders etc as required.

a 4.1.1 100 mm width X 50 mm depth X 1.6mm thickness Meter 350.00 623.00 218,050.00

b 4.1.2 150 mm width X 50 mm depth X 1.6mm thickness Meter 220.00 686.00 150,920.00

Digitally signed by ARTI

3.2 4.2 Supplying and installing following size of perforated pre-painted M.S cable trays

bends with perforation not more than 17.5%, inconvenient sections, joined with

connectors, suspended from the ceiling with M.S. suspenders including

bolts&nuts, painting suspenders etc as required.

a 4.2.1 100 mm width X 50 mm depth X 1.6mm thickness Each 25.00 948.00 23,700.00

b 4.2.2 150 mm width X 50 mm depth X 1.6mm thickness Each 23.00 1,105.00 25,415.00

3.3 4.3 Supplying and installing following size of perforated pre-painted M.S cable trays

reducers with perforation not more than 17.5%, inconvenient sections, joined

with connectors, suspended from the ceiling with M.S. suspenders including

bolts&nuts, painting suspenders etc as required.

a 4.3.1 100 mm width X 50 mm depth X 1.6mm thickness Each 12.00 1,089.00 13,068.00

b 4.3.2 150 mm width X 50 mm depth X 1.6mm thickness Each 10.00 1,281.00 12,810.00

3.4 4.4 Supplying and installing following size of perforated pre-painted M.S cable trays

a 4.4.1 100 mm width X 50 mm depth X 1.6mm thickness Each 7.00 1,231.00 8,617.00

b 4.4.2 150 mm width X 50 mm depth X 1.6mm thickness Each 5.00 1,498.00 7,490.00

3.5 4.5 Supplying and installing following size of perforated pre-painted M.S cable trays

Cross members with perforation not more than 17.5%, inconvenient sections,

joined with connectors, suspended from the ceiling with M.S. suspenders

including bolts&nuts, painting suspenders etc as required.

a 4.5.1 100 mm width X 50 mm depth X 1.6mm thickness Each 100.00 1,089.00 108,900.00

b 4.5.2 150 mm width X 50 mm depth X 1.6mm thickness Each 80.00 1,281.00 102,480.00

Total of Sub-Head - VI 671,450.00 0.00

SUB HEAD - VII: LIFT

NDSR-7.1 Supplying, installation, testing & commissioning of 13 Passenger , Gearless type,Machne room-less

passenger lift having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed

specifications as under and additional details given in schedule of technical particulars. Provisions of General

CPWD specifications for lift works are to be followed.

Design of lifts:- Passengers Type

Capacity:-13 Passengers

Speed - 1.5 Metre/Sec. (MPS)

Door Operation - Full Height Infra-red cross-multi beam

Floor - G+3 = 4stops

Travel - 16Mtr. (Approx.)

Stop & Opening - 4 Stops & 4 Openings (One side only)

Type and Position of Machinery - Gearless type, Machine Room-less

Controller - Microprocesser based AC variable voltage & variable frequency Control

Lift Car inside size - 2000mm x1100mm ( Width x Depth).

Size of Lift Well - 2500mm x 2200mm (Width x Depth)

Entrance -900mm

Entrance -900mm

Automatic rescue device complete with dry maintenace free batteries as required.

Operation - Microprocessor based Simplex Selective Collective with attendant.

Power - 415 V ±10%, 3 Phase, 50 Hz.

Type or Design of Lift Car - Stainless steel scratch proof (Moon Rock Finish).

Car door - Power operated centre opening horizontal sliding stainless steel Scratch proof (Moon

Digitally signed by ARTI

Door Safety - Full Height Infra-red cross-multi beam

Landing doors - Centre opening, stainless steel scratch proof (Moon Rock Finish) at all floors. It

must be fire-rated for minimum 1-Hrs and supplier must provide the certiifcate for the same alongwith

material supply.

Car operating Panel / Landing operating panel - Car operating panel with braile symbol luminous

buttons and braile illuminated push buttons on all landing in Stainless Steel Mirror finish.

Hand rail - Shall be SS finished not less than 600mm long, fixed above 900mm from the car-floor

level on rear-wall or side wall.

Voice announcement system - In car to announce the position of the elevetor in hoist way as the

car passes or stop at a floor served by the elevator.

Intercom system

NDSR -7.2 Supplying, installation, testing & commissioning of 13 Passenger , Gearless type,Machne room-less

passenger lift having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed

specifications as under and additional details given in schedule of technical particulars. Provisions of General

CPWD specifications for lift works are to be followed.

Design of lifts:- Passengers Type

Capacity:-13 Passengers

Speed - 1.5 Metre/Sec. (MPS)

Door Operation - Full Height Infra-red cross-multi beam

Floor - G+2= 3stops

Travel - 12Mtr. (Approx.)

Stop & Opening - 3 Stops & 3 Openings (One side only)

Type and Position of Machinery - Gearless type, Machine Room-less

Controller - Microprocesser based AC variable voltage & variable frequency Control

Lift Car inside size - 2000mm x1100mm ( Width x Depth).

Size of Lift Well - 2500mm x 2200mm (Width x Depth)

Entrance -900mm

Entrance -900mm

Automatic rescue device complete with dry maintenace free batteries as required.

Operation - Microprocessor based Simplex Selective Collective with attendant.

Power - 415 V ±10%, 3 Phase, 50 Hz.

Type or Design of Lift Car - Stainless steel scratch proof (Moon Rock Finish).

Car door - Power operated centre opening horizontal sliding stainless steel Scratch proof (Moon

Door Safety - Full Height Infra-red cross-multi beam

Landing doors - Centre opening, stainless steel scratch proof (Moon Rock Finish) at all floors. It

must be fire-rated for minimum 1-Hrs and supplier must provide the certiifcate for the same alongwith

material supply.

Car operating Panel / Landing operating panel - Car operating panel with braile symbol luminous

buttons and braile illuminated push buttons on all landing in Stainless Steel Mirror finish.

Hand rail - Shall be SS finished not less than 600mm long, fixed above 900mm from the car-floor

level on rear-wall or side wall.

Voice announcement system - In car to announce the position of the elevetor in hoist way as the

car passes or stop at a floor served by the elevator.

Intercom system

Total of Sub-Head 0 2984404

SUB HEAD-VIII : Panels and Earthing

NDSR- 8.1 LIFT PANEL Girls and Boys Hostel

Digitally signed by ARTI

1 No. 80amps 4P MCCB(16KA) with thermal Magnetic release (PRTM) with Class-C

transient voltage surge suppression device suitable for 3 phases as per specifications.

1 No.80 amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA,

harmonics upto 15th order & %THD) with RS-485 Port.

Sets of 80/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

100 A TPN Aluminium Bus Bar with colour coded PVC Sleeves

2 Nos. 63 Amp TP MPCB

2 Nos. 63 Amp TP MCB

1 Nos.40 Amp DP MCB

Lift Panel Boys Hostel as described above Each 2 143,064.89 286,129.79

NDSR- 8.2 MAIN BUILDING PANEL FOR GIRLS HOSTEL BUILDING

1 No. 200amps 4P MCCB(25KA) with thermal Magnetic release (PRTM) with Class-C

transient voltage surge suppression device suitable for 3 phases as per specifications.

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA,

harmonics upto 15th order & %THD) with RS-485 Port.

Sets of 200/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

250A TPN Aluminium Bus Bar with colour coded PVC Sleeves

3 No. 100amps 4P MCCB

2No. 63amps 4P MCCB

1 No. 40amps 4P MCB

MAIN PANEL FOR GIRLS HOSTEL DESCRIVED ABOVE Each 1 231,104.83 231,104.83

NDSR- 8.3 MAIN BUILDING PANEL FOR BOYS HOSTEL BUILDING

1 No. 200amps 4P MCCB(25KA) with thermal Magnetic release (PRTM) with Class-C

transient voltage surge suppression device suitable for 3 phases as per specifications.

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA,

harmonics upto 15th order & %THD) with RS-485 Port.

Sets of 200/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

250A TPN Aluminium Bus Bar with colour coded PVC Sleeves

5 No. 100amps 4P MCCB

2No. 63amps 4P MCCB

Digitally signed by ARTI

1 No. 40amps 4P MCB

MAIN PANEL FOR BOYS HOSTEL DESCRIVED ABOVE Each 1 231,104.83 231,104.83

NDSR- 8.4 DISPENSARY, UPS Panel

1 No. 100amps 4P MCCB(16KA) with thermal Magnetic release (PRTM) with Class-C

transient voltage surge suppression device suitable for 3 phases as per specifications.

7 No.63amps 4P MCB

FLOOR VTPN DB FOR DISPENSARY DESCRIVED ABOVE set 3 55,024.96 165,074.88

NDSR- 8.5 METER BOARD PANEL (FOR TYPE-3 QUATER)

Supplying, Fabricated, Installation, Testing & commissioning of Metal clad LT cubical

wall/Floormounted self supported totally enclosed compartmentalized separate

compartment for each Meter with 1 No. SPN MCB earth bus & studs as required having

pad lock and sealing arrangement for each compartment, dustandverminproof IP-

42protection made of 1.6mm thick CRCA sheet steel dulypowdercoated for indoor

application having arrangement for incoming/outgoing

cabletermination,earthing,insulated aluminium BusBar3phase4wire of suitable size

inaseparate chamber,suitablefor 415V 3phase 50Hz AC supplydulyprewiredwith

10sq.mm Copperwire, fro min-comer MCCB to busbar and upto connectors mounted in

1 No. 100A 4P MCCB (25 KA) as per PRMB-3 as mentioned in

Metering & Indication:

i) 1 set of R,Y,B phase indicating lamps

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP

iii) 1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A CT's

1 Set of 150 A TPN Aluminium Bus Bar with colour coded PVC Sleeves

i) 12 Nos. 63A FP MCB (10 KA) with 3 phase energy meters

ii) 1 Nos. 40A DP MCB (10 KA)

iii) Incomer for solar PV system as per site requirement

METER BOARD PANEL(FOR TYPE- 3 QUATERS) DESCRIBED AS ABOVE

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and Set

5.2 providing masonry enclosure with cover plate having locking arrangement and watering 15 5,958.00 89,370.00

pipe etc. with charcoal/ coke and salt as required.

5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, Set 11

and providing masonry enclosure with cover plate having locking arrangement and

watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including Set 10

accessories, and providing masonry enclosure with cover plate having locking

arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as

5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor Metre 100

earth electrode, including connection/ termination with GI thimble etc. as required. 62.00 6,200.00

Digitally signed by ARTI

5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe FRLSom earth Metre 100

electrode including connection with brass nut, bolt, spring, washer excavation and re- 1,638.00 163,800.00

filling etc. as required.

5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth Metre 150

electrode including connection with G.I. nut, bolt, spring, washer excavation and re- 755.00 113,250.00

filling etc. as required.

5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in Metre 150

15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble 313.00 46,950.00

excavation and re-filling as required.

5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for Metre 200

connections etc. as required.

5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections Metre 300

etc. as required.

5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as Metre 130

Total of Sub Head-VIII 1,007,691.00 1,192,207.45

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

PROJECT :- PROPOSED COLLEGE OF HORTICULTURE AT MORENA (M.P.)

Name of Project: “Construction of Boy’s and Girl’s Hostels, Type-III Residential Quarters, and Health

Dispensary Facility at Morena (M.P.), under RLBCAU Jhansi.”

Detailed estimate of Internal & External Plumbing Services

S. No. Description

Amount (in Rs.)

1 SANITARY FIXTURES & FITTINGS ₹ 1,845,861.40 ₹ 1,860,936.00

2 INTERNAL & EXTERNAL WATER SUPPLY ₹ 2,613,066.80 ₹ 1,131,365.25

3 SOIL, WASTE, VENT PIPES, RAIN WATER PIPES & FITTINGS. ₹ 7,764.90 ₹ 2,265,252.86

4 EXTERNAL SEWERAGE AND STORM WATER DRAINAGE ₹ 33,582.50

GRAND TOTAL (DSR +NSR) ₹ 9,757,829.70

GRAND TOTAL (DSR +NSR) ₹ 9,757,829.70

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

PROJECT :- PROPOSED COLLEGE OF HORTICULTURE AT MORENA (M.P.)

Name of Project: “Construction of Boy’s and Girl’s Hostels, Type-III Residential Quarters, and Health Dispensary Facility at

Schedule Of Quantity

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

1.0 SANITARY FIXTURES & FITTINGS

Providing and fixing white vitreous china extended wall

mounting water closet of size 780x370x690mm of approved

shape including providing and fixing white vitreous china

1.1 17.78 cistern with dual flushing fitting,of flushing capacity 3 litre/6 Each 59 ₹ 14,999.15 ₹ 884,949.85

litre( adjustable to 4 litre/8 litres),including seat cover and

cistern fittings,nuts,bolts and gasket etc. complete.

Providing and fixing wash basin with C.I. brackets, 15 mm

dia CP Brass single hole basin mixer of approved quality and

make, including painting of fittings and brackets, cutting and

making good the walls wherever required:-

a) White Vitreous China Wash basin size 630x450 mm with a

15 mm CP Brass single hole basin mixer

Providing and fixing kitchen sink with C.I. brackets, C.P.

brass chain with rubber plug, 40 mm C.P. brass waste

1.3 17.9 complete, including painting the fittings and brackets, cutting

and making good the walls wherever required:

17.9.1 White glazed fire clay kitchen sink of size 600x450x 250 mm Each 14 ₹ 3,892.75 ₹ 54,498.50

Supply, Receiving, Storing & Fixing of CP brass wall

mounted sink mixer with C.P. wall flange, swinging spout

complete as required with flow rate of 6.0 LPM complying to

Green Building requirements.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible

tube upto 1 metre long with S.S. triangular plate to Eureopean

1.5 17.16A type W.C. of quality and make as approved by Engineer - in - Each 59 ₹ 349.15 ₹ 20,599.85

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

Providing and fixing CP Brass 32mm size bottle trap of

1.6 17.22A approved quality & make and as per the direction of engineer Each 60 ₹ 1,034.80 ₹ 62,088.00

Providing and fixing C.P. brass long nose bib cock of

1.7 18.50 approved quality conforming to IS standards and weighing not

less than 810 gms

1.8 17.34 Providing and fixing toilet paper holder

Supply, Receiving, Storing & Fixing of C.P. brass twin coat

1.9 MR-2 hook with PVC rawl plug & C.P. brass screw complete as Each 60 ₹ 734.00 ₹ 44,040.00

required. Make :

Providing and fixing C.P. brass angle valve for basin mixer

1.1 18.53 and geyser points of approved quality conforming to IS:8931.

Providing and fixing unplasticised P.V.C. connection pipe

with PTMT Nuts, collar and bush of approved quality and

18.74.2 15 mm nominal bore with 45 cm length Each 334 ₹ 121.90 ₹ 40,714.60

Providing and fixing Chromium Plated towel ring

Rectangular shape with concealed fittings arrangement of

approved quality and colour, of approved brand &

manufacture complete as per direction of Engineer in Charge.

Providing and fixing of C. P. brass towel rail 600 x 20 mm

size complete with C.P. brass brackets.

Providing and fixing Cp bras liquid soap container 109 mm

wide, 125 mm high and 112 mm distance from wall of

1.14 MR-5 standard shape with bracket of the same materials with snap Each 60 ₹ 1,750.00 ₹ 105,000.00

fittings of approved quality and colour, weighing not less than

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

Providing and fixing white vitreous china battery based

infrared sensor operated urinal of approx. size 610 x 390 x

370 mm having pre & post flushing with water (250 ml & 500

1.15 17.80 ml consumption), having water inlet from back side, including Each 11 ₹ 7,979.20 ₹ 87,771.20

fixing to wall with suitable brackets all as per manufacturers

specification and direction of Engineer-in-charge.

Providing and fixing 75 mm high, 50 mm deep and 18 mm

thick stone slab table rubbed, edges rounded and polished,

fixed in urinal partitions by cutting a chase of appropriate

1.16 8.10 width with chase cutter and embedding the stone in the chase

with epoxy grout or with cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 6 mm nominal size) as

per direction of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 11 ₹ 4,051.85 ₹ 44,570.35

Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

Providing and fixing C.P. brass long body bib cock of

1.2 18.51 approved quality conforming to IS standards and weighing not

less than 690 gms.

Providing and fixing low flow type two way bib tap as per

1.22 MR-6 approved make complete in all respect as per engineer in the Each 194 ₹ 2,423.00 ₹ 470,062.00

Providing and fixing of recessed type soap tray complete,

including cutting and making good the walls where required.

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

Providing and Fixing Electric Hot Water Geyser of Stainless

Steel Material Grade 316 with Inlet and Outlet Connection

with 15 mm dia Angle Valve and Geyser (25 LTR)shall be

equipped with inbuilt non return valve and insulation on inner

1.24 MR-8 Each

and outer surfaces for prevention of heat losses 2 nos CP

round wall flange and CP Brass Screws and Rawl plugs all

other required accessories Complete in all respect as per

direction of Engineer - in - charge .

10.1 Electric Geyser 15 Litre Capacity Each 14 ₹ 10,484.00 ₹ 146,776.00

10.2 Electric Geyser 25 Litre Capacity Each 64 ₹ 12,007.00 ₹ 768,448.00

TOTAL CARRIED OVER TO SUMMARY ₹ 1,845,861.40 ₹ 1,860,936.00

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

2 INTERNAL & EXTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing

of pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

2.2 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of

Engineer in Charge.

Internal work - Exposed on wall

g) Derived 65mm nominal bore Mtr. 184 ₹ 1,125.00 ₹ 207,000.00

h) Derived 80mm nominal bore Mtr. 212.75 ₹ 1,467.00 ₹ 312,104.25

i) Derived 100mm nominal bore Mtr. 92 ₹ 1,990.00 ₹ 183,080.00

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete :

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

Derrived 32 mm nominal bore Each 51 ₹ 2,297.00 ₹ 117,147.00

Derrived 40 mm nominal bore Each 44 ₹ 2,297.00 ₹ 101,068.00

Supplying, fixing, testing and commissioning of butterfly

valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required

Providing and fixing motorized valve with sensor of approved

quality, to complete the work.

a) 40 mm dia ( Flushing Riser) Each 3 ₹ 34,884.00 ₹ 104,652.00

b) 50 mm dia ( Domestic Riser) Each 3 ₹ 35,438.00 ₹ 106,314.00

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked, with

2.7 18.48 cover and suitable locking arrangement and making necessary Each 37000 ₹ 11.00 ₹ 407,000.00

holes for inlet, outlet and overflow pipes but without fittings

and the base support for tank.

TOTAL CARRIED OVER TO SUMMARY ₹ 2,613,066.80 ₹ 1,131,365.25

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

SOIL, WASTE, VENT PIPES, RAIN WATER PIPES &

Providing and fixing soil, waste and vent pipes

Supplying, Installation, Testing and Commissioning of uPVC

pipes type -B conforming to IS 13592 (1992) for soil, waste

and vent pipes including all fittings rubber ring type (plain or

3.1 MR-10 with access door) e.g. bends, junctions, cowls, offsets, access

pieces, jointing with rubber ring joints with lubricant etc.

fixed with clamps to walls with cement concrete 1:2:4 blocks

complete in all respects. (For Soil & Waste Pipe)

Providing, laying, Jointing, Testing and commissioning of

uPVC pressure pipes of 6Kg/Sqcm pressure rating class 5

(IS : 4985-2000) including fittings, tees, bends, clamps,

coupling and adaptors supports, and jointing with solvent

joint, testing and necessary earth work in excavation,

backfilling, disposal of surplus earth with a lead upto 50m

complete, compaction and consolidation Including laying

cement concrete 1:2:4 alround UPVC pipe including bed

concrete and thrust blocks at bends as per standard design (For

Soil & Waste Pipe)

Supplying, Installation, Testing and Commissioning of uPVC,

P or S trap of self cleansing design with / without vent. arm

Setting in cement concrete 1:2:4 mix complete including cost

of cutting & making good the Wall / Floors wherever required.

Providing and fixing floor drain with jali size 110X50 size

3.4 MR-13 inlet and outlet including cutting and making good the walls

and floors wherever required complete in all respects.

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

Providing and fixing 125 mm dia, 3 mm thick Stainless steel

grating with frame for floor traps or drains of required

pattern including cutting and making good the floors

Providing and fixing cast brass Cleanout plug with suitable

insert keys for opening in brass cap, male threaded

joint/reducer with G.I. socket caulked to Pipe/fittings of CI

pipe including cost of lead joints etc. complete in all respect.

Making khurras 45x45 cm with average minimum thickness of

5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate of 20 mm nominal size) over P.V.C.

3.7 12.22 sheet 1 m x1 m x 400 micron, finished with 12 mm cement each 22 ₹ 298.25 ₹ 6,561.50

plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement, rounding the edges and making and finishing the

outlet complete.450 X 450mm -

Providing and fixing on wall face unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10 mm

gap for thermal expansion, (i) Single socketed pipes.

Derived 160 mm diameter (with all fittings) Metre 344 ₹ 1,327.00 ₹ 456,488.00

Providing and fixing to the inlet mouth of rain water pipe cast

3.9 12.44 iron grating 15 cm diameter and weighing not less than 440 Each 22 ₹ 54.70 ₹ 1,203.40

TOTAL CARRIED OVER TO SUMMARY ₹ 7,764.90 ₹ 2,265,252.86

EXTERNAL SEWERAGE AND STORM WATER

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE , MORENA

TOTAL DSR Amount (in MR Rate MR Amount

S. No. DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

Providing orange colour safety foot rest of minimum 6 mm

thick plastic encapsulated as per IS : 10910 on 12mm dia steel

bar conforming to IS : 1786 having minimum cross section as

23 mmx25mm and over all minimum length 263 mm and

width as 165mm with minimum 112 mm space between

protruded legs having 2 mm tread on top surface by ribbing or

chequering besides necessary and adequate anchoring

projections on tail length on 138 mm as per standard drawing

and suitable to with stand the bend test and chemical

resistance test as per specifications and having manufacture's

permanent identification mark to be visible even after fixing,

including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 20 mm nominal size) complete as per design.

Making connection of drain or sewer line with existing

including breaking into and making good the walls, floors

with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) cement plastered

on both sides with cement mortar 1:3 (1 cement : 3 coarse

sand), finished with a floating coat of neat cement and making

necessary channels for the drain etc. complete :

19.21.2 For pipes 250 to 300 mm diameter Each 10 ₹ 922.40 ₹ 9,224.00

19.21.3 For pipes 350 to 450 mm diameter Each 10 ₹ 1,328.45 ₹ 13,284.50

TOTAL CARRIED TO SUMMARY ₹ 33,582.50

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE, MORENA

COLLEGE OF HORTICULTURE MORENA, MADHYA PRADESH.

Name of Project: “Construction of Boy’s and Girl’s Hostels, Type-III Residential Quarters,

and Health Dispensary Facility at Morena (M.P.), under RLBCAU Jhansi.”

SUMMARY: FIRE FIGHTING WORKS

SUB HEAD DESCRIPTION AMOUNT DSR AMOUNT NDSR

SUB HEAD -1.0 PIPING, HYDRANT , SPRINKLER

AND ACCESSORIES SYSTEM FOR BUILDINGS

B SUB HEAD-2.0 FIRE FIGHTING PUMPS ₹ 456,920.00 ₹ 0.00

GRAND TOTAL FOR DSR AND NON DSR ₹ 3,859,837.23

GRAND TOTAL FOR DSR AND NON DSR ₹ 3,859,837.23

SQ - 1 Fire Fighting

Digitally signed by ARTI

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE, MORENA

COLLEGE OF HORTICULTURE MORENA, MADHYA PRADESH.

Name of Project: “Construction of Boy’s and Girl’s Hostels, Type-III Residential Quarters, and Health Dispensary Facility at Morena (M.P.), under RLBCAU Jhansi.”

FIRE FIGHTING ESTIMATE

ITEM CODE RATE AMOUNT

S.NO. NO. DSR 2025 DESCRIPTION OF ITEMS BOYS HOSTEL GIRLS HOTEL TYPE III DISPENSARY UNIT

QUANTITY DSR 2025 NDSR DSR NDSR

A. SUB HEAD -1.0 PIPING, HYDRANT , SPRINKLER AND

ACCESSORIES SYSTEM FOR BUILDINGS

1 27.6 Providing Laying Testing and Commissioning of C class

Heavy duty MS Pipe Conforming to IS : 1239 / 3589

including Fittings like elbows , tees , flanges , tapers ,

nuts , bolts , gaskets etc in ground including welding

excavation and Providing cement concrete blocks as

supports anticorrosive treatment with coaltar / asphalts

tape as per IS :10221 refilling the trench etc of following

sizes complete as required .

2 27.7 Providing Laying Testing and Commissioning of C class

Heavy duty MS Pipe Conforming to IS : 1239 / 3589

including Fittings like elbows , tees , flanges , tapers ,

nuts , bolts , gaskets etc and fixing the pipe on the wall /

ceiling with suitable clamp / support frame and painting

with two or more coats of synthetic enamel paint of

required shade complete as required .

3 27.9 Supplying and Fixing Single Headed Internal Hydrant

Valve with instantaneous gunmetal coupling of 63 mm

dia with cast iron wheel ISI marked conforming to IS :

5290 ( Type A ) with blank gunmetal material cap and

chain as required .

3.1 27.9.1 Single Headed Gunmetal Material 4 5 5 14 Set 8208.00 114912.00

SQ - 1 Digitally signed byFire

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE, MORENA

ITEM CODE RATE AMOUNT

4 27.10 Supplying and Fixing Single Headed External Yard TOTAL

Hydrant Valve with 1 Nos 63 mm dia instantaneous

female Gunmetal material Coupling and cast iron wheel

ISI marked Conforming to IS : 5290 ( Type A ) with blank

stainless steel cap and chain as required .

4.1 27.10.1 Single Headed Gunmetal Material 0 0 0 0 Set 8208.00 0.00

5 27.11 Supplying Fixing Testing and Commissioning of butterfly

valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly

ISI marked complete with nuts , bolts , washers , gaskets

conforming to IS : 13095 of following sizes as required .

6 27.13 Supplying and Fixing orifice plate made out of 6 mm

thick stainless steel ( Grade 304 ) with orifice of required

size to be fitted between flange and landing valve of

external and internal hydrants to reduce pressure at the

outlet to the level of 3.5 kg / sqcm complete as required .

7 27.14 Providing Installation Testing and Commissioning of Non

Return Valve of following sizes conforming to IS : 5312

complete with rubber gasket , GI Bolts , Nuts , washers

etc as required .

8 27.16 Supplying and Fixing 63 mm dia 15 m Long RRL Hose

pipe with 63 mm dia male and female coupling duly

bound with GI wire , rivet etc . Conforming to IS : 636 (

Type A ) as Required .

9 27.17 Supplying and Fixing First aid hose reel with MS

Construction Spray painted in Post office red conforming

to IS : 884 complete with the following as required

SQ - 2 Digitally signed byFire

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE, MORENA

ITEM CODE RATE AMOUNT

20 mm nominal internal dia water hose thermoplastic ( TOTAL

Textile Reinforced ) Type - 2 as per IS : 12585

20 mm nominal internal dia gunmetal globe valve and

Drum and Brackets for fixing the equipments on wall

Connections from Riser with 25 mm dia stop gunmetal

valve and MS Pipe and socket

10 27.18 Supplying and Fixing 63 mm dia Gunmetal Material Short

Branch Pipe with 20 mm nominal internal diameter size

nozzle conforming to IS : 903 suitable for instantaneous

connection to interconnect hose pipe coupling as

11 27.19 Supplying and Fixing of Fire brigade connection of Cast

iron body with gunmetal male intantaneous inlet

coupling complete with cap and chain as required for

suitable dia ms pipe connection conforming to IS : 904 as

12 27.20 Supplying and Fixing Air Vessel made of 250 mm dia 8

mm thick ms sheet 1200 mm in height with air release

valve on top and flanged connection to riser drain

arrangement with 25 mm dia gunmetal wheel valve with

required accessories pressure gauge and painting with

synthetic enamel paint of approved shade as required

27.22 Providing & fixing of pressure switch in M.S. pipe 2 2 1 5 Each 1670.00 8350.00

line including connection etc. as required.

20 NS-1 Providing and fixing of Fire Hose Cabinet size not less

than 2.1 x 1.2 x 0.90 mtr made out of M.S. sheet not less

than 1.5 mm thick having central opening and 4 mm

thick glazed glass doors (Two nos.) suitably marked on

the outside 'with the letters "FIRE HOSE" including

necessary locking arrangement and painting in PO red

colour suitable to accommodate, internal hydrant valve,

2 nos 15 mtr long Hose pipe, branch pipe, nozzle and

fire man's axe. It shall be fixed inside the FHC Cabinet

Complete as required .

SQ - 3 Digitally signed byFire

HOSTELS, DISPENSARY TYPE III COLLEGE OF HORTICULTURE, MORENA

ITEM CODE RATE AMOUNT

20 NS-2 Providing and fixing standard firemans axe with heavy

rubber handle. 4 5 5 14 Each 788.42 11037.89

21 NS-3 Providing and fixing dial type pressure gauge with

isolation cock and copper pipe on main header Dial

diameter 100 mm celebration 0-16 / sq. cm. 4 5 5 14 Each 4139.88 57958.25

22 NS-4 Providing and fixing Fire Extinguishers (CO2 type

powder ) 4.5 Kg Capacity complete with all accessories

as per manufacturers specifications.

23 NS-5 Providing and fixing Fire Extinguishers (A, B, C type

powder ) 6 Kg Capacity complete with all accessories as

per manufacturers specifications.

24 NS-6 Providing and fixing Fire Extinguishers (A, B, C type

powder ) 9 Kg Capacity complete with all accessories as

per manufacturers specifications.

25 NS-7 Providing and fixing 25 mm dia Inspector Test Valve 25

mm with drain arrangement complete with all

accessories as per manufacturers specifications.

26 NS-8 Providing and fixing Fe 36 modular Fire Extinguishers 10

Kg Capacity complete with all accessories as per

manufacturers specifications.

TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD A 2569407.20 833510.03

SUB HEAD-2.0 FIRE FIGHTING PUMPS

TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD A 456920.00 0.00

SQ - 4 Digitally signed byFire

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

PROJECT :- PROPOSED COLLEGE OF HORTICULTURE AT MORENA (M.P.)

Name of Project: “Construction of Boy’s and Girl’s Hostels, Type-III Residential Quarters, and Health Dispensary Facility at Morena (M.P.), under RLBCAU Jhansi.”

S.No Works Amount ( DSR) Amount ( MR)

1 SITC of Fire Alarm system & Public Address System ₹ 1,915,664.00 ₹ 455,844.00

2 SITC of LAN & WiFi Network System ₹ 1,873,182.00 ₹ 31,988.00

3 SITC of Video Surveillance System(CCTV) ₹ 963,438.00 ₹ 280,741.00

Net Total ₹ 5,520,857.00

Digitally signed by ARTI

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

SECTION A - FIRE ALARM & PA SYSTEM

S.No./ Amount Amount

Unit Rate DSR Unit Rate MR

DSR Description Unit Qtys DSR ITEMS MR ITEMS

2025 (INR) (INR)

28.2 INTELLIGENT FIRE ALARM SYSTEM

28.2.1 Supplying, installation, testing and commissioning of micro

processor based intelligent addressable main fire alarm

panel, central processing unit with the following loop

modules and capable of supporting not less than 240

devices (including detectors) and minimum 120 detectors per

loop and loop length up to 2 km, network communication

card, minimum 320 character graphics/ LCD display with

touch screen or other keypad and minimum 4000 events

history log in the non volatile memory (EPROM), power

supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt

sealed maintenance free batteries with automatic charger.

The panel shall have facility to connect printer to printout log

and facility to have seamless integration with analog/digital

voice evacuation system (which is part of the schedule of

work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system

with open protocol BACnet/ Modbus over IP complete as per

specifications.

Supplying, installation, testing & commissioning of intelligent

3.0 28.2.4 analog addressable photothermal detector complete with Nos 94 3,004.00 282,376.00

mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent

4.0 28.2.9 addressable thermal detector with rate of rise cum fixed Nos 8 2,866.00 22,928.00

temperature thermistor complete with base as required.

Supplying, installation, testing & commissioning of

addressable manual call point complete as required.

Supplying, installation, testing & commissioning of

addressable fire control module complete as required.

Supplying, installation, testing & commissioning of

addressable horn cum strobe complete as required

9.0 28.2.19 Supplying, installation, testing & commissioning of fire fighter Nos 18 1,689.00 30,402.00

phone jack complete as required.

Supplying and installation of photo luminescent safety signage made up of LED based exit

signage with 90 min. battery backup as per NBC including arrangement for fixing on wall /

ceiling etc. complete as required (size 150 mm x 300 mm)

28.3 PUBLIC ADDRESS SYSTEM

28.3.1 Supplying, installation, testing & commissioning of 6 zone,

voice alarm controller with USB, MP4 player (including 6

zone button paging station) with seamless integration facility

with main fire alarm panel for voice evacuation complete as

Supplying, installation, testing & commissioning of Voice

13.0 28.3.9 command keypad 6 zone, with microphone assembly Nos 2 85,450.00 170,900.00

complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W

ceiling speaker complete as required.

Digitally signed by ARTI

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Supplying, installation, testing & commissioning of digital audio amplifier having 250 Watt

Power Amplifier having audio signal amplification for public address and voice alarm system

MR-2 MR-2 and 100v & 4-16 OHMS Transformer, Super Class-D Topology Full Band with PWM Modulator, Nos 2 143,664.00 - 287,328.00

complete as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured

cable, 600/1000V rated with annealed copper conductor

having glass mica fire barrier tape covered by an extruded

layer of Cross Linkable Ethylene Propylene Rubber (EPR)

insulation and LSZH inner bedding, steel wire armouring &

LSZH outer sheath complete as required.

Supplying and drawing of cable Fire Retardant PVC

insulated copper conductor cable in the existing surface /

recessed steel conduit of following pairs, cores and size

including connections and interconnections etc. as required.

28.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Mtr 200 61.00 12,200.00

Digitally signed by ARTI

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

SECTION B - LAN BACKBONE NETWORK + Wi-Fi System

S.No. Unit Rate DSR Unit Rate MR AMOUNT DSR AMOUNT MR

Description Unit Qtys

(INR) (INR) ITEMS ITEMS

Supplying, Installation, Testing and commissioning of

CAT6 Copper Information Outlet (IO) with face plate

of color as per site requirement, should have ETL/UL

1.0 39.14 verification program certificate for compliance with Nos 14 212 - 2,968.00 -

ANSI/TIA-568.2-D. All copper Cable and Components

should be from same OEM to maintain compatibility

and interoperability etc. complete as required.

Supply& Fixing of Face Plate : Single/Double Port Flush & surface mount. Polycarbonate Hi-

Grade Plastic FR Grade with ABS underplate & CRCA metal fram & UV Resistant 850 degree

C/ Glow Wire Test. The face plate should be compatible for Cat5e, Cat6 range of RJ45 and

different types of AV connectors.The face plate Size should be of minimum 86x86mm as

Supplying, Installation, Testing and commissioning of

following CAT6A Patch Cord should have ETL/UL

verification program certificate for compliance with

ANSI/TIA-568.2-D etc. complete as required.

39.13.1 Patch Cords of length 1m (3ft) Each 28 173.00 4,844.00 -

39.13.2 Patch Cords of length 2m (6ft) Each 28 405.00 11,340.00 -

Supply, Installation, testing and commissioning of 24 port Cat 6A 19" Modular Patch Panel

(loaded) enable all possible combinations of the various types of cable (UTP, FTP, SFTP)

mounted on the same panel by using various toolless connector blocks/modules. Have a metal

structure enabling them to be durably fixed to the uprights of the 19” chassis and assuring

automatic grounding between toolless RJ-45 connectors, the panel, and the 19” uprights of the

enclosure. Include rear cable support with plastic cable guides to hold cable without need for

cable ties. Include quick mounting system to mount the panel into the 19” rails without use of

cage-nuts. These may be used to secure the connections of wifi access points, IP cameras,

servers, or other critical devices. MAF Required by System Intigrator, Front Removal IO's

option for maintenance and trouble shooting with 6 Different Colours Labels for Labelling &

Identification of Individual Ports. Tested and guaranteed under dual circuit IEEE PoE++ more

than 90W for up to 2500 on-load connections / disconnections

39.18 Supplying, drawing, Testing and commissioning of - -

Cat6A UTP 4 pair, 23 AWG solid copper cable in - -

existing conduit/ on surface, U/FTP, LSZH, Non- - -

Plenum, Horizontal (solid) Cable suitable for high - -

speed data networking application supporting upto - -

10Gbps over a 100 meter channel. The 4 Unshielded - -

Twisted Pairs (UTP) cable with color coded insulation - -

for easy indentification should have FLAME - -

PROPERTIES i.e. Flammability Test - IEC 60332-1, - -

Smoke Density - IEC 61034, LSZH standards - -

compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE - -

802.3an, RoHS. Delay Skew should be < 45NS. The - -

outer Cable Diameter should be 7.5 + 2 mm. Cable - -

should have been tested and verified by UL/ ETL etc. - -

Digitally signed by ARTI

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

complete as required. - -

39.20 Supplying and drawing following core Multi mode - -

Fiber Optic Cable having corrugated steel armoring, - -

leser optimize 50/125 μm with HDPE jacket, LSZH - -

(Low smoke Zero Halogen), Tight-buffered or loose - -

tube, maximum attenuation: < 3.5 dB/km at 850 nm, < - -

1.5 dB/km at 1300 nm, bandwidth > 2000 MHz-km at - -

850 nm, > 500 MHz-km at 1300 nm compliance and - -

certifications: ISO/IEC 11801 Ed. 2.2, ANSI/TIA-568- - -

C.3, ITU-T G.651.1 RoHS compliant. Multi Mode Fiber - -

shall be Central-loose tube filled with Thixotropic jelly, - -

duly following Standards: ISO 11801, IEC 60793- - -

1/60794-1-2, ITU-T-REC G.652D and Telecordia GR- - -

20-core, High quality Electro Chromium Coated - -

Corrugated Steel tape (ECCS ) and HDPE- Sheath, - -

Operating ambient Temperature should be – 5 0C to - -

+50 0C and Storage Temperature should be – 5 0C to - -

+50 0C, Maximum Attenuation ± 3.5 dB/km at - -

Operational Wavelength 850 nm and ± 1.5 dB / km at - -

Operational Wavelength 1300 nm . type of fiber - -

should be 50/125 / G.652D & Refractive Index should - -

be 1.483/1.478, The value for Mode-filed,Cladding - -

Diameter 50 ± 2.5 μm and 125 ± 1μm correspondingly - -

i/c splicing & marking etc complete as required. - -

39.20.1 6 Core Multi Mode Optical Fiber Cable Mtr 105 87.00 9,135.00 -

7.0 39.2 Supply and fixing following port Rack Mount loaded

LIU with pigtail, Front-mounted cable saddles for

jumper management, suitable to manage both splices

and terminations, Pre-assembled shelves in multiple

configurations, Rubber fiber slotted bracket built-in,

metal splice shelf to protect the fibers, 2 fiber spools

built-in for 900μm tight buffered fiber storing, Capable

of storing up to 3 meters of 900μm tight buffered fiber

per adapter, Removable front and rear covers for

better access to interior of LIU, Should be Single /

Multi mode LC Type fully loaded. Accessory kit

consists of cable ties, mounting ear screws, and spiral

wrap tube etc complete as required.

Digitally signed by ARTI

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Supplying and fixing Patch Cord of Optical Fiber Multi

Mode or Single Mode LC to LC Fiber Duplex having

high precision ceramic ferrule with good concentricity,

Fiber corning single mode G652D, Cable Type 2mm

DSR2025 with Mechanical specification Apex Offset < 50 μm,

39.22 Fiber Height + 100 nm, End-face radius of Curvature

7mm < R <25mm, Repeatability < 0.2 db, Working

ambient Temperature – 5 0C to +50 0C, Storage

Temperature – 10 0C to +50 0C, Length -- 2meter,

Type -- LC-LC Duplex etc complete as required.

9.0 39.3 Supplying, installation, Testing and commissioning of

following capacity 24 port Layer 2 indoor Network

Switch having features and specifications etc. as

mentioned here under: At least 24 X RJ-45 Gigabit

Ethernet Ports and additional 2 X 10G Base -T with 4

X SFP Ports with non-blocking architecture by having

Switching capacity of min. 168Gbps and packet

forwarding rate of 125Mpps or higher, 16K MAC table.

Console Port, USB port, Stacking support of min. 8

units per stack. Internal dual AC Power supply, STP,

RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K

Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD

Snopping V1/V2. IGMP /MLD Groups 1K or more,

IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6

ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ,

Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN,

VLAN Trunking, DHCP Snopping, Server, server

Screening. RADIUS , TACACS+ Authentication, ǪoS:

802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR,

WRED, 802.1p. ACL: MAC based, IPv4C IPv6,

TCP/UDP Port number, time based ACL, TFTP Client,

SNMP V1, v2c, v3, SNMP traps, RMON, DHCP

server, relay, client, LLDP, LLDP-MED, OAM, Dying

Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based

route, SSL, SSH. 6 kV surge protection on all Gigabit

Ethernet ports and on all GE RJ-45 access ports.

Certifications: UL, CE, FCC, RoHS, MTCTE,

OEM/Product must be on Trusted Telecom Portal of

Department of Telecommunication, Government of

India etc. complete as required.

39.3.1 24 port PoE Layer 2 Network Switch with PoE

Support of 370W or higher with each copper port

supporting 802.3at PoE+ min. Nos 7 125,393.00 877,751.00

10.0 39.4 Supplying, installation, Testing and commissioning of

following capacity 24 port Layer 3 Network Switch

having features and specifications etc. as mentioned

here under: At least 20 X RJ-45 Gigabit Ethernet Ports

and additional 4 combo 10/100/1000 base-t/SFP Ports

with additional 4 SFP+ ports non-blocking architecture

by having Switching capacity of min. 128Gbps and

packet forwarding rate of 95Mpps or higher, 16K MAC

table. Console Port, USB port, Internal AC Power

Digitally signed by ARTI

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

supply with operating temperature of 0 to +50 0C.

Stacking port with stacking support of minimum 8 units

per stack. 48K Mac address, 9K or more Jumbo

frame, ERPS with enabling ring to converge in less

than 50 ms from node or link failure, Static routing,

Static, 6to4, ISATAP and GRE, IPv6 Neighbor

Discovery (ND), BGP, ISIS, MPLS, VRRP v2,

OSPFv2/v3, PBR, Route Redistribution, RIPv1/v2/ng,

IP Helper all L3 Protocols should support from day 1

for both IPv6 and IPv4, 802.1x, Port security , Radius

C TACACS+ authentication C accounting, DAD, DAI,

DoS attack prevention, SSH, Guest VLAN, IP Access

List, MAC Access List. Multicast: VLAN, PIM-SM, PIMDM,

PIM- SDM, PIM-SMv6, DVMRP v3 and MSDP,

IGMP C MLD Snooping, Flow mirroring, IGMP C MLD

Snooping Ǫuerier, Per-VLAN IGMP C MLD Snooping.

SNMP, Dual configurations, Multiple images, RMON,

LLDP/LLDP-MED, sFlow, DHCP/BOOTP Client,

IPv4/IPv6, Syslog server, Debug command, 802.3ah

Ethernet Link OAM, 802.1ag Connectivity Fault,

Y.1731 OAM, 802.1Ǫbb Priority- based Flow Control

(PFC), Dying Gasp, Cable Diagnostics , 6 kV surge

protection on all Gigabit Ethernet ports and on all GE

RJ-45 access ports. Certifications: UL, CE, FCC,

RoHS, MTCTE, OEM/Product must be on Trusted

Telecom Portal of Department of Telecommunication,

Government of India etc. complete as required. Nos 2.00 193,791.00 387,582.00

11.0 39.8 Supplying, Installation, Testing and commissioning of

indoor Wireless Access Point for High density use

having features and specifications etc. as mentioned

here under- WiFi6 802.11ax 574Mbps (2.4GHz) +

2402Mbps (5GHz), WIFI 6 Certified, 1 x RJ45 console

port, MG 2.5G LAN POE Port, factory reset,

WPA/WPA2/WPA3™ Personal/Enterprise, WEP

64/128-bit, SSID broadcast disable, MAC address

access control, Internal RADIUS server, SNMP,

Customizable Captive Portal, Auto Channel, Works as

Access Point, WDS, WDS with AP, Wireless Client .,

Web (HTTP), Secure Socket Layer (SSL), Traffic

control, Support ATF/Fast Roaming/Band Steering,

Supports enhanced security – WPA-PSK/WPA2-

PSK/WPA3-PSK and RADIUS client, and Cipher

negotiation, and MAC/ IP ACL for networks,

Certifications: MTCTE, CE, FCC.

Works as Standalone, Compatible with S/W & H/W

Controller with addtional features like - Real-Time

Monitoring and Alerts, Rich Advanced Features,

Centralized Device Management, Role-Based

Administration, Real-Time Monitoring, VLAN and

Access Control, Auto RF Management and Bandwidth

Optimization, Multi-SSID and Captive Portal

Authentication.OEM/Product must be on Trusted

Digitally signed by ARTI

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Telecom Portal of Department of Telecommunication,

Government of India etc. complete as required. Nos 10 35,559.00 355,590.00

12.0 39.6 Supplying, Installation, Testing and commissioning of

small form-Pluggable (SFP) for Network Switches.

Must be hot Pluggable, RoHS Complaint, etc.

complete as required.

39.6.3 10 G SFP + Single Mode/Multi Mode Nos 4 14,972.00 59,888.00

39.23 Supplying and fixing of following size Wall Mount - -

Rack having Fixed Structure with 0.8mm CRCA - -

Sheet, completely knocked-down condition (CKD) - -

Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, - -

Minimum 2 cable entry/exit provision at Top and - -

bottom with rubber protection, Front 5mm Toughened - -

Glass with lock, wall mounting kit, Powder coated - -

Color- RAL- 7035, complied with UL & RoHS, 2 x 6 - -

sockets 16A power distribution units, 3 numbers - -

closed cable organizer, Hardware mounting screws - -

packet of 20 x 1 number, etc. complete as required. - -

Total Amount 1873182.0 31,988.00

Total Amount 1873182.0 31,988.00

Digitally signed by ARTI

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

SECTION D - CCTV SYSTEM

Unit Rate DSR Unit Rate MR AMOUNT DSR AMOUNT MR

Description Unit Qtys

(INR) (INR) ITEMS ITEMS

1.0 DSR2025 5/6MP IP IR Dome Camera

40.5 Supplying Installation Testing and Commissioning of

5/6MP IP IR Dome Camera having following

specifications and features etc :-

1)Type of Camera: Dome Camera

2) Image Sensor: 1/2.8" or better progressive Scan

CMOS get color image even at night condition

3) Signal System: PAL/NTSC

4) Minimum Illumination: 0.008Lux@ F1.4, AGC ON, 0

lux with IR or better

5) Imaging: 1/3s to 1/30000s Shutter Support, Auto

Gain Control , White Balance- Auto, Back Light

Compensation, Multi zone Privacy Masking, HLC,

Digital Watermarking.

6) On Screen Display: Camera should display Camera

title, Date & Time in live & recorded video both.

7) Signal to Noise Ratio: > 50 dB

8) Day & Night: True Day & Night High Performance

Mechanical IR cut filter with auto switch, IR Source-

Inbuilt IR LED's with effective distance upto 50 Mtrs

integrated IR 30 Mtrs for colour view in night.

9) Video Compression (Minimum): H.265 or better,

Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723

10) Wide Dynamic Range: WDR (120dB or more)

11) Digital Noise Reduction: DNR (2D/3D) On/Off

12) Streaming: Triple streaming, configurable

13) Video Streaming & Frame Rates: Triple streaming