Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.2 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹16.0 L+₹1.6 L (11.4%)Rejected-AOC DALHOUSIE ROAD BYE PASS CHOWK PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹16.3 L+₹2.0 L (13.9%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹16.6 L+₹2.3 L (16.2%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹16.7 L+₹2.4 L (16.5%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun Pin-145001
WELCOME MAINTENANCE OF OFFRS MD ACCN UNDER AGE B/R-I OF GE (N) MAMUN
2023_MES_608773_1
GE(N)/M-26/2023-24
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹40,000
3 Oct 2023
12 Jul 2023
16 Aug 2023
12 Jul 2023
14 Aug 2023
9 Aug 2023
Amount
Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.
M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L preparation of new plastered surface of wall, applying wall care putty in any layers to obtain even and smooth and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. Note: Where thickness of putti is required more than 1mm thick, the same shall be make good using POP and than putti shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account.
M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of old surface of walls including minor repair (to make good in cement mortar 1:6 or with POP) to obtain smooth surface and applying one coats of oil bound distemper complete all as specified and directed.
M&L Preparation of old plastered/unplastered surfaces of walls making even and smooth using plastering/wall care putty to small disturbed surfaces and applying two coat of oil bound distemper on walls complete all as specified and directed.
Preparation of old surface after complete removal of existing treatment, applying wall care putty in any no of layers to obtain even and smooth surface and applying two coats of oil emulsion distemper over one coat complete all as specified & directed. Note: Where thickness of putti is required more than 1mm thick, the same shall be make good using POP and than putti shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account.
M&L for preparation of old ceiling surface and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old surface of walls and applying one coat of white wash complete all as specified and directed.
M&L for preparation old painted steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
S&F factory made pre laminated 18mm thick lead free 100% solid WPC (wood polymer composit) sheet one side prelam sheet and other side wood nature colour for cupboard shutter having high natural fiber contant 25 to 30 % wood colour sheet with density not less than 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard,Cabinet etc complete as per direction of Engr-in-charge/ Manufacturer's specification.
All as per Srl item No 14 but both side plain, without printed.
S&F factory made 5mm thick WPC board one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cbm bent 90° complete all as specified and directed.
S&F 150 mm size stainless steel brignt finish handle as approved by GE, fixed with Nut and bolt complete all as specified and directed.
S&F Telescopic type Side channel of drawer of standard size incl roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long complete all as specified and directed.
S&F stainless steel plain basket of size 17''x20''x6'', "Grade 304" (as per sample) complete all as specified and directed.
S&F Stainless steel partition of size 17''x20''x6'', "Grade 304" (as per sample) complete all as specified and directed.
S&F Stainless steel cutlery of size 17''x20''x6'', "Grade 304" (as per sample) complete all as specified and directed.
S&F Stainless steel cup & soucer of size 17''x20''x4'', "Grade 304"(as per sample) complete all as specified and directed.
S&F Stainless steel plate basket of size 17''x20''x6'', "Grade 304" (as per sample) complete all as specified and directed.
S&F Stainless steel auto, zero crank hinges,fency type with concealed pattern fitted to shutters complete all as specified and directed
S&F Magnetic catcher (as per sample), fixed with Nut and bolt complete all as specified and directed.
S&F 100mm hasp and staples, safety type of aluminium anodised (as per sample) complete all as specified and directed.
M&L for vitified ceramic tiles 8-10 mm thick (squre/rectangular) polished, area of each tile n exc 0.36 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement including dismantling of existing tiles incluidng cement mortar of any description (but not backing, rubbish off the premises complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and directed.
All as per item 28 but vitified ceramic tiles 8-10 mm thick (squre/rectangular) polished, area of each tile n exc 0.36 sqm.
All as per item 28 but non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc.
M&L green Marble work 15 mm thick (table rubbed and polished) as in cooking plateform (providing suitable hole for LPG pipe), window cill, steps, stair case trade & riser etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra including dismantling of existing tile/stone of any description including bedding layer of mortar, rubbish off the premises complete all as specified and directed.
M&L for Round chamfering, to the edges of marble slabs complete all as specified and directed.
S&F in repair sinks with drainage board made of Stainless steel of 1mm thick kitchen with plugs, washers ,waste pipe and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets & waste coupling and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
M&L screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.
Taking down chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.
All as per Srl Item 35 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.
Taking down shutters of any description not exc 1 Sqm each and refixing in same opening safely, (including minor repairs ) complete all as specified and directed.
Disconnecting water tank from Roof Slab/staging of single/double/Triple story bldg, float valve with float arm and outlet pipe from PVC service water tank, emptying stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes etc, finally washing the internal surfaces with bleaching powder, closing wash outlet, refixing water tank, float valve and out let in proper position, replacement of old PVC top cover with proper hinge type cover as per sample including minor repair if required and testing of capacity Cleaned on :_____ (Date/month/year)"2" height on outer face of tank with synthetic enamel white paint 250 litres to 500 liters complete all as specified and directed.
All as per serial item No. 39 but exc 500 litres to 1000 litres.
Taking up or down steel water tubing and connections including cleaning for refixing of pipe 15mm bore complete all as specified and directed.
All as per item No 41above but 20mm bore.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.
All as per Srl item No 43 above but fixing only complete all as specified
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.
All as per Srl item No 45 above but fixing only complete all as specified.
S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10cm in girth complete all as specified and directed.
S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick (as per sample)complete all as specified and directed.
S&F in repair 15mm bore dia concealed type angle valve / stop valve (as per sample) cast copper alloy chromium plated fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down,screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated (as per sample) complete all as specified & directed.
S&F 500 Litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), two layered, ISI marked hoisted and fixed in position all as specified in SSR Part – I including necessary tank nipple, including 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and fixed, screwed for iron pipe 15mm bore (min weight 455 gms) after disconnecting existing tanks from roof slab/ staging of single/double/triple story bldg, lowering, including dismantling of existing tank and removal complete all as specified and directed.
S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), two layered, ISI marked hoisted and fixed in position all as specified in SSR Part – I including necessary tank nipple, including 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and fixed, screwed for iron pipe 15mm bore (min weight 455 gms) after disconnecting existing tanks from roof slab/ staging of single/double/triple story bldg, lowering, including dismantling of existing tank and removal complete all as specified and directed.
S&F in repair PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr complete all as specified and directed.
M & L Plain cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken floors portion including demolition of PCC & removal of rubbish complete all as specified and directed.
M&L 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using liquid WPC of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed. (WPC shall be measured and paid separately)
M&L for bitumen blown of any grade, applied hot, two coats to concrete/plastered surfaces at the rate of 1.5 Kg per sqm per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.
M&L for repair to old steel window not exc 1 sqm with replacement of unserviceable/damaged hinges, all handle including necessary welding to shutter and chowkhat for making window in serviceable condition, applying two coats of synthetic enamel paint, complete all as specified and directed.
All as per item 58 above but exc 1.00 sqm but not exc 2 sqm.
M&L for both side 35 mm thick single piece factory made wire gauge door shutter with wire cloth (stainless steel & aluminium XPM) manufactured with PVC printed sheets 5 mm thick on both side on frame made out of MS tube 19 SWG, size 19x19 mm complete with lock rail & beautified by PVC beading all around, fixed with PVC solvent cement as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45x70mm ( Single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length and fix with and incl suitable holdfast complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.
M&L for Box type steel windows and ventilators comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc (divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded, fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F pressed steel frames for doors/windows of size 125x60mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
M & L for preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
M&L Soild PVC door frame of size 50mm x 95mm (suitable for moulded door) made out of 5mm wood grain colour PVC sheets & edges will be painted to match printed sheet as reinforced with 19 mm square MS tube and fixing in opening as specifiecation & drawing complete all as specified and directed.
M&L for Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F for 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.
S&F aluminium anodized barrel tower bolts 200 mm of extruded section (as per sample) complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads, rubbish of premises complete all as specified and directed.
S & F figured glass pin head type 3 mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair MS helical door spring 150mm size fixed to steel frame complete all as specified and directed.
S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with Stainless steel wire staples complete all as specified and directed.
S&F in repair for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with Stainless steel wire staples complete all as specified and directed.
S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capstan head chromium plated fancy type (as per sample) ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia Bib taps long nose, cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.
S & F in repairs for pillar tap 15 mm bore chromium plated screwed down, high pressure screwed for iron pipe.
M&L for 15mm bore dia Brass CP suitable for centre hole basin mixer for mixing hot & cold water (as per sample) screwed down & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs wall mixer (as per sample) for 15mm bore dia, cast copper alloy chromium plated fixed of complete all as specified and directed.
S&F in repairs Sink mixer for 15mm pipe, cast copper alloy chromium plated (as per sample) fixed in repairs of complete all as specified and directed..
S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe of single length up to grating complete all as specified and directed.
S&F in repair glass shelf assembly (as per sample) consisting of 5.5mm thick sheet glass (size 18cm x 6cm) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.
S&F in repair glass corner shelf quarter round (225mm dia) with CP Brass Bracket, (as per sample) complete all as specified and directed.
S&F stainless steel kitchen plate rack of size 750 x 900 mm having wall thickness not less than 1mm of approved make fixed with mild steel screw complete all as specified and directed.
S&F CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and directed.
S&F in repair 15mm CP brass health foucet (hand shower) of 8mm dia and 1m long CP flexible tube and wall hook complete all as specified and directed.
S&F in repair PVC low level flushing cistern 10 ltr capacity (as per sample) inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
S&F Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including plastic seat and cover (as per sample) with stainless steel or aluminised hinging device and making connections to trap, and to flush pipe fixed in repair complete all as specified and directed.
S & F one piece Vitreous china wash down water closet pan pedestal pattern with flusing cistern, (size 69x36x74 cm) white (as per sample) including plastic seat and cover (as per sample) with stainless steel or aluminised hinging device and making connections to trap, and to flush pipe fixed in repair complete all as specified and directed. Make : Hindware cat part No. 92082 and equivalent to Somany & Cera
S&F vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including CI 'P' or 'S' trap provision of lean concrete bedding, connection to drain out pipe and to flush pipe anti syphonage pipe etc complete including making good to floor as per existing where required complete all as specified and directed.
S&F in repair toilet paper holder with flash recessed type of stainless steel (as per sample) complete all as specified and directed.
S&F plastic water closet seat, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair 20mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, finials etc (as per sample) suitable for single curtain rod complete all as specified and directed.
Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 14,218.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
WALIA ENTERPRISES
M/S CHAIN SINGH CONTRACTOR
M/S TARA CHAND CONSTRUCTION CO.
kewal builders
Hans Raj Pooni
VIKRAM SINGH MANHAS
GANDOTRA CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .