REPAIR AND REPLACEMENT OF EXISTING INTERNAL WATER TUBING TO CPVC PIPES AND CONNECTED ITEMS AT MAP-I MARRIED ENCLAVE AND CLEANING OF SERVICE WATER TANKS IN THE AOR OF AGE B/R-II UNDER GE (ARMY) SURATGARH AT SURATGARH MIL STN

Amount

Notes:- (i) The 100 percent of items should be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder soon after the acceptance of tender after approval of GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) Material obtained from demolition/dismantled, other than those listed schedule of credit and the serviceable material (other than reused in the work) shall be the property of the Govt and shall be removed and deposited in the MES Store Yard without any extra cost to Govt. (v) In case of non-availability of any make mentioned under list of Makes the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and with the prior approval of Accepting Officer the Group-I category approved makes of HQ CE SWC Jaipur / HQ CE BTZ shall be followed. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items above amount of Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall maintain an album containing Photos of all the material brought at site and during each stage wise work progress & Album shall be kept at site. On completion of work, same will be deposited in Engineer-in-Charge office. (ix) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) nominal mix as in columns, pillars, piers, post and struts complete all as specified and directed. by Engineer-in -charge.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed by Engineer-in-charge.

M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified & directed by Engineer-in-Charge.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand 12mm sq guard bar, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc complete all as specified and directed by Engineer-in-charge.

M&L for removing up, cutting & uprooting grass on roof top, sides of walls not exc 30cm girth including and stacking of serviceable material and disposal of unserviceable material to distance n exc 50cm and clearing site and cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust and making good of the disturbed surface in brick work cement mortar 1:4 and plaster in 1:4, surface area not exc 0.50 sqm removing rubbish off the premises, etc complete.

M&L for raking of existing grouts of brick tiles and grout finish in CM 1:3 with 5% crude oil by weight of cement complete all as specified and as directed by Engineer-in-charge.

M&L 10mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-charge.

M&L for 10mm thick rendering in cement mortar (1:4) on brick wall other than fair face of vertical surface to received finished / tiles complete all as specified and directed by Engineer-in-charge.

M&L for 40mm thick PCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in surface finish or in leveling course for tank stand finished even and smooth without using extra cement complete all as specified and as directed.

M&L for non skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors , set in tile adhesive confirming to IS 15477-2019 type 1 and thickness as per manufacturer instruction of approved make complete all as specified and directed by Engineer-in-charge. Note :- Joints of tile shall be filled with appropirate white cement base grouting compound to match the colour of tile cost of the same deemed to be included it nothing extra shall be paid on this account. (ii) Corners of floor and wall tiles in bathroom area shall be filled with silicon Gel cost of the same deemed to be included, nothing extra shall be paid on this account.

M&L for glazed ceramic tiles (coloured) 300mm x 600mm x 7-8mm thick on vertical surfaces such as dado, skirting etc, set in tile adhesive confirming to IS 15477-2019 type 2 and thickness as per manufacturer instruction of approved make complete all as specified and directed by Engineer-in-charge. Note :- Joints of tile shall be filled with appropirate white cement base grouting compound to match the colour of tile cost of the same deemed to be included it nothing extra shall be paid on this account. (ii) Corners of floor and wall tiles in bathroom area shall be filled with silicon Gel cost of the same deemed to be included, nothing extra shall be paid on this account.

M&L for 15mm thick rendering in cement mortar (1:4) on fair face surface of brick masonary or concrete surface of walls, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for 10mm thick rendering in cement mortar (1:6) on fair faced surface of brick masonary or concrete surface of walls, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

Supplying and laying of 15mm bore / 1/2" CPVC pipes SDR 11 & Plain / brass CPVC SDR 11 fittings including all fittings and fixed complete to walls and ceilings or laid in floors, trenches including plug at opening or points for fitting and fixtures and powder coated clamps for fixing in walls inlcluding taking down old unseviceable tubing complete all as specified and directed by Engineer-in-charge.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain / brass CPVC SDR 11 fittings including all fittings and fixed complete to walls and ceilings or laid in floors, trenches including plug at opening or points for fitting and fixtures and powder coated clamps for fixing in walls inlcluding taking down old unseviceable tubing complete all as specified and directed by Engineer-in-charge.

S&F CPVC brass elbow special fittings for connection of CPVC tubing 15/20mm bore complete all as specified and directed by Engineer-in-charge.

S&F CPVC brass tee special fittings for connecting for connection of CPVC tubing 15/20mm bore complete all as specified and directed by Engineer-in-charge.

S&F CPVC brass male brass threaded adaptor special fitting (MTA/MBTA) for connecting of CPVC tubing 15/20mm bore complete all as specified and directed by Engineer-in-c/harge.

S&F CPVC brass female brass threaded adaptor special fitting (FTA/FBTA) for connecting of CPVC tubing 15/20mm bore complete all as specified and directed by Engineer-in-c/harge.

S&F special fitting tank adaptor for connecting of CPVC tubing 15/20mm bore complete all as specified and directed by Engineer-in-c/harge.

S&F special fitting union for connecting of CPVC tubing 15/20mm bore complete all as specified and directed by Engineer-in-c/harge.

S&F special fitting ball valve for connecting of CPVC tubing 15/20mm bore complete all as specified and directed by Engineer-in-c/harge.

Disconnecting existing tanks of capacity exc 250 ltr & not exc 500 ltr, setting aside (or lowering if required) for repairs and cleaning & removing all scale and dirt etc, from tank and from mouths of circulating pipes and hoisting and re-fixing in same or other position including 20mm dia float valve (PTMT) and tank lid if required complete all as specified and as directed by Engineer-in-charge. Note :- Quoted rate shall deemed to include of required small fitting such as tank nipple, socket, union, nut bolts etc and marking to cleaning date over the tank with synthetic enamel paint.

M. S. CONTRACTOR (BID ID -3206288)

godara construction company (BID ID -3200507)

BANSAL BROTHERS (BID ID -3206308)

BHADU BUILDERS (BID ID -3206285)

AK CONSTRUCTION (BID ID -3200663)